Image:Welding power supply-Miller-Syncrowave350LX-front-triddle.jpg

From Wikipedia, the free encyclopedia

Public domain This work has been (or is hereby) released into the public domain by the copyright holder. This applies worldwide.

In case this is not legally possible:
The copyright holder grants any entity the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Contents

[edit] Overview

This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and Shielded Metal Arc Welding. This machine has the ability to change direct current polarities as well as to change from direct current to alternating current welding current with rotation of the switch in the center of the picture. Do not switch under load is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components.

[edit] Technical Specifications

  • Output Range: 3 to 400 amps
  • Weight: 496 lbs (225 kg)
  • Dimensions: 36 inches (92 cm) tall, 22 inches (57 cm) wide, 25 inches (64 cm) deep

[edit] Power Label

For clarification the input power information label reads as follows:

  • Volts 200/230/460
  • Amps 151/131/67
  • KW 17.4
  • Phase 1
  • Hertz 50/60

[edit] Credits

Photograph taken by Triddle in the welding lab at Clark College on February 25, 2005.

File history

Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version.
Click on date to download the file or see the image uploaded on that date.


The following pages on the English Wikipedia link to this file (pages on other projects are not listed):

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified image.