Trapeze (sailing)

From Wikipedia, the free encyclopedia

A 49er with both skipper and crew on the trapeze
Enlarge
A 49er with both skipper and crew on the trapeze

In Sailing, the trapeze refers to a wire that comes from a point high on the mast, usually where the shrouds are fixed, to a hook on the crew member's harness at approximately waist level. The position when extended on the trapeze is outside the hull, braced against it (or an extension of it outwards) with the soles of the feet, facing the masthead, and clipped on by a hook on the trapeze harness. This gives the crew member more leverage to keep the boat flat by allowing the crew member's centre of gravity to balance the force of the wind in the sails.

An additional benefit is the ability to "walk" along the gunwhale to balance the boat's trim fore and aft. This is necessary to prevent racing catamarans such as the Tornado from digging the bow into the water, and causing a nosedive and often a spectacular capsize.

Boats may have only one trapeze, such as the 470, where only the crew uses the trapeze. Boats, such as the 49er, may have trapeze wires for both the skipper and the crew. Trapeze has several colloquial names such as "the wire" or simply "the trap".

When a boat loses power in its sails, and heels to the windward side, the crew on the trapeze may get dipped in the water if they do not react in time. This accident is occasionally known as "Tea Bagging" or "Going Lipton".

Some classes allow footloops on the gunwhale to allow those on the trapeze to locate their feet with relative security. This helps to prevent the crew from swinging forward, sometimes round the forestay when the boat decelerates suddenly.

[edit] Regulations

Due to safety concerns, the International Sailing Federation changed the rules in 2004 concerning trapeze harnesses, effective January 1, 2009: "40.2 A trapeze or hiking harness shall have a device capable of quickly releasing the competitor from the boat at all times while in use.” These are already widely in use, and make it possible for the sailor to unhook themselves from the wire from all angles while it is under tension, thus decreasing the chance of getting trapped underwater or in dangerous conditions.

[edit] History

The trapeze was originally developed at Thames Sailing Club, at Surbiton on the Thames in the United Kingdom on the Thames A Class Rater "Vagabond", owned by Beecher Moore. When deployed there for the first time it was called a "Bell Rope".


Sails, Spars and Rigging
Sails
Course | Driver | Extra | Genoa | Gennaker | Jib | Lateen | Mainsail | Moonsail | Royal | Spanker | Spinnaker | Spritsail | Staysail | Studding | Tallboy | Topgallant | Topsail | Trysail
Sail anatomy and materials
Clew | Foot | Head | Leech | Luff | Roach | Tack    Dacron | Kevlar
Spars
Boom | Bowsprit | Fore-mast | Gaff | Jackstaff | Jigger-mast | Jury Rig | Main-mast | Mast | Mizzen-mast | Masthead Truck | Spinnaker Pole | Yard
Rigging components
Backstay | Block | Boom vang | Braces | Buntlines | Cleat | Clevis Pin | Clewlines | Cunningham | Downhaul | Forestay | Gasket | Gooseneck | Guy | Halyard | Outhaul | Parrell beads | Peak | Preventer | Ratlines | Rigging (Running) | Shackle | Rigging (Standing) | Sheet | Shroud | Stay mouse | Stays | Throat | Topping lift | Trapeze


Sailing Manoeuvres
Broach | Capsize | Close Hauled | Death Roll | Heeling | Hiking | In Irons | Jibe | Planing | Reaching | Running | Reefing | Tack | Trapezing | Wear
In other languages