Topping lift
From Wikipedia, the free encyclopedia
The topping lift (more rarely known as an uphaul) is a line which is part of the rigging on a sailboat; it applies upward force on a spar or boom. The most common topping lift on a modern sailboat is attached to the spinnaker pole.
Topping lifts are also used to hold a boom up when its sail is lowered. This line would run from the free end of the boom forward to the top of the mast. The line may be run over a block at the top of the mast and down to the deck to allow it to be adjusted. For small booms, the topping lift may be run from end of the boom to the backstay or next mast aft. When the sail is raised again, the topping lift is loosened or removed. On sailboats used for racing, boom lift function is frequently incorporated into the boom vang system, to reduce the number of lines aloft.
Sails, Spars and Rigging | |
---|---|
Sails | |
Course | Driver | Extra | Genoa | Gennaker | Jib | Lateen | Mainsail | Moonsail | Royal | Spanker | Spinnaker | Spritsail | Staysail | Studding | Tallboy | Topgallant | Topsail | Trysail | |
Sail anatomy and materials | |
Clew | Foot | Head | Leech | Luff | Roach | Tack Dacron | Kevlar | |
Spars | |
Boom | Bowsprit | Fore-mast | Gaff | Jackstaff | Jigger-mast | Jury Rig | Main-mast | Mast | Mizzen-mast | Masthead Truck | Spinnaker Pole | Yard | |
Rigging components | |
Backstay | Block | Boom vang | Braces | Buntlines | Cleat | Clevis Pin | Clewlines | Cunningham | Downhaul | Forestay | Gasket | Gooseneck | Guy | Halyard | Outhaul | Parrell beads | Peak | Preventer | Ratlines | Rigging (Running) | Shackle | Rigging (Standing) | Sheet | Shroud | Stay mouse | Stays | Throat | Topping lift | Trapeze |