User:Tmorton166/Desk/Video scaler

From Wikipedia, the free encyclopedia

This article is undergoing a rewrite and cleanup here. If you want to make edits or contribute you could do it here or on the article page - but please leave a note at User_talk:Tmorton166 so it gets added

A video scaler is a processing device for converting video signals between arbitrary resolutions. They are usually used for converting low resolution signals (such as composite video or S-video) to higher resolutions like HDTV, although they can also work in the reverse. It performs a similar job to a Line doubler however with extra signal processing and optimizing.

These devices are available for both digital and analogue inputs and outputs or, more commonly, both combined and are usually combined with other video hardware. A prime example are devices for converting an analogue VGA signal from a computer into DVI (digital) signal for display on a monitor; in this case the resolution outputted by the computer may be lower than that required by the monitor creating a distorted image. A scaler can be used to increase the resolution to the correct level.^[1]

1 How it works
2 Consumer applications
- 2.1 Stand alone devices
- 2.2 Combined devices
3 Footnotes
4 References
5 External Links

[edit] How it works

A video scaler does not simply increase the resolution of the input sigal, doing this would distort the image

references: http://www.hometoys.com/htinews/oct03/articles/hci/processors.htm

http://www.engadget.com/2006/02/14/how-to-scale-video-for-better-hdtv-viewing/

[edit] Consumer applications

[edit] Stand alone devices

Most of the scalers not only interconverts resolutions but also perform deinterlacing, which is a completely separate, resolution-independent process. In the consumer market, a frequent application for these devices is converting low-resolution video into high-definition (for example, 480i to 1080i), by inserting the scaler in the video chain between a low-resolutioin video source (ex. VCR) and a higher resolution display (ex.TV). Depending on the quality of electronics, the viewer may perceive an improvement in video quality even though the amount of video information remains the same throughout this process. All TV stations which broadcast in high definition use commercial-grade scalers as part of their infrastructure to enable transmission of legacy standard definition video material on a high definition signal.

[edit] Combined devices

A rare use of the term "HD upconverter" applies to the upconverting DVD player. This type of DVD player converts DVD-Video format video on a DVD directly to a high definition video signal for use with an HDTV. An upconverting DVD player effectively has a simple video scaler built in that is limited to accepting input from the player's video transport and not from any external sources. Such a DVD player may be constrained by digital rights management HDCP which limit upconversion to being output only on copy-protected digital transports or with lower resolution output. Conceptually upconversion can be done with analog outputs as well.