Term symbol

From Wikipedia, the free encyclopedia

In quantum mechanics, the term symbol is an abbreviated description of the angular momentum quantum numbers in a multi-electron atom. It is related with the energy level of a given electron configuration. LS coupling is assumed. The ground state term symbol is predicted by the Hund's rules.

The term symbol has the form

{}^{2S+1}\!L_{J}
where
S is the total spin quantum number. 2S+1 is the spin multiplicity: the maximum number of different possible states of J for a given (L,S) combination.
L is the total orbital quantum number in spectroscopic notation,
J is the total angular momentum quantum number.

When used to describe electron states in an atom, the term symbol usually follows the electron configuration, e.g., in the carbon case, the ground state is 1s22s22p2 3P0.

The term symbol is also used to describe compound systems such as mesons or atomic nuclei, or even molecules (see molecular term symbol). In that last case, Greek letters are used to designate the (molecular) orbital angular momenta.

For a given electron configuration

  • The combination of an S value and an L value is called a term, and has a statistical weight (i.e., number of possible microstates) of (2S+1)(2L+1);
  • A combination of S, L and J is called a level. A given level has a statistical weight of (2J+1), which is the number of possible microstates associated with this level in the corresponding term;
  • A combination of L, S, J and MJ determines a single state.

As an example, for S = 1, L = 2, there are (2×1+1)(2×2+1) = 15 different microstates corresponding to the 3D term, of which (2×3+1) = 7 belong to the 3D3 (J=3) level. The sum of (2J+1) for all levels in the same term equals (2S+1)(2L+1). In this case, J can be 1, 2, or 3, so 3 + 5 + 7 = 15.

Contents

[edit] Term symbol parity

The parity of a term symbol is calculated as

P=(-1)^{\sum_i l_i}\,\!,

where li is the orbital quantum number for each electron. In fact, only electrons in odd orbitals contribute to the total parity: an odd number of electrons in odd orbitals (those with an odd l such as in p, f,...) will make an odd term symbol, while an even number of electrons in odd orbitals will make an even term symbol, irrespective of the number of electrons in even orbitals.

When it is odd, the parity of the term symbol is indicated by a superscript letter "o", otherwise it is omitted:

{}^2\!\mathrm P_{1/2}^o has odd parity, but {}^3\!\mathrm P_0 has even parity.

Alternatively, parity may be indicated with a subscript letter "g" or "u", standing for gerade (even in German) or ungerade (odd):

{}^2\!\mathrm P_{1/2,u} for odd parity and {}^3\!\mathrm P_{0,g} for even.

[edit] Ground state term symbol

It is relatively easy to calculate the term symbol for the ground state of an atom. It corresponds with a state with maximal S and L.

  1. Start with the most stable electron configuration. Full shells and subshells do not contribute to the overall angular momentum, so they are discarded.
    • If all shells and subshells are full then the term symbol is {}^1\!S_0.
  2. Distribute the electrons in the available orbitals, following Pauli exclusion principle. First, we fill the orbitals with highest ml value with one electron each, and assign a maximal ms to them (i.e. +1/2). Once all orbitals in a subshell have one electron, add a second one (following the same order), assigning ms = −1/2 to them.
  3. The overall S is calculated by adding the ms values for each electron. That is the same as multiplying ½ times the number of unpaired electrons. The overall L is calculated by adding the ml values for each electron (so if there are two electrons in the same orbital, then we add twice that orbital's ml).
  4. Calculate J as:
    • if less than half of the subshell is occupied, take the minimum value J = | L − S | ;
    • if more than half-filled, take the maximum value J = L + S;
    • if the subshell is half-filled, then L will be 0, so J = S.

As an example, in the case of fluorine, the electronic configuration is: 1s22s22p5.

1. Discard the full subshells and keep the 2p5 part. So we have five electrons to place in subshell p (l = 1).

2. There are three orbitals (ml = 1, 0, −1) that can hold up to 2(2l+1) = 6 electrons. The first three electrons can take ms = 1/2 (↑) but the Pauli exclusion principle forces the next two to have ms = −1/2 (↓) because they go to already occupied orbitals.

  ml
+1 0 −1
ms: ↑↓ ↑↓ ↑

3. S = 1/2 + 1/2 + 1/2 − 1/2 − 1/2 = 1/2; and L = 1 + 0 − 1 + 1 + 0 = 1, which is "P" in spectroscopic notation;

4. As fluorine 2p subshell is more than half filled, J = L + S = 3/2. Its ground state term symbol is then {}^{2S+1}\!L_J = {}^2\!\mathrm P_{3/2}.

[edit] Term symbols for an electron configuration

To calculate all possible term symbols for a given electron configuration the process is a bit longer.

  • First, calculate the total number of possible microstates N for a given electron configuration. As before, we discard the filled (sub)shells, and keep only the partially-filled ones. For a given orbital quantum number l the total number of electrons that can be fitted is t = 2(2l+1). If there are e electrons in a given subshell, the number of possible microstates is
N= {t \choose e} = {t! \over {e!\,(t-e)!}}.
As an example, lets take the carbon electron structure: 1s22s22p2. After removing full subshells, there are 2 electrons in a p-level (l = 1), so we have
N = {6! \over {2!\,4!}}=15
different microstates.
  • Second, draw all possible microstates. Calculate ML and MS for each microstate, with M=\sum_{i=1}^e m_i where mi is either ml or ms for the i-th electron, and M represents the resulting ML or MS respectively:
  ml  
  +1 0 −1 ML MS
all up ↑ ↑ 1 1
↑ ↑ 0 1
↑ ↑ −1 1
all down ↓ ↓ 1 −1
↓ ↓ 0 −1
↓ ↓ −1 −1
one up

one down

 ↑↓ 2 0
↑ ↓ 1 0
↑ ↓ 0 0
↓ ↑ 1 0
↑↓ 0 0
↑ ↓ −1 0
↓ ↑ 0 0
↓ ↑ −1 0
↑↓ −2 0
  • Third, count the number of microstates for each ML—MS possible combination
  MS
  +1 0 −1
ML +2 1
+1 1 2 1
0 1 3 1
−1 1 2 1
−2 1


  • Fourth, extract smaller tables representing each possible term. Each table will be (2L+1)(2S+1), and will contain "1"s as entries. The first table extracted corresponds to ML ranging from −2 to +2 (so L = 2), with a single value for MS (implying S = 0). This corresponds to a 1D term. The remaining table is 3×3. Then we extract a second table, removing the entries for ML and MS both ranging from −1 to +1 (and so S = L = 1, a 3P term). The remaining table is a 1×1 table, with L = S = 0, i.e., a 1S term.

S=0, L=2, J=2

1D2

  Ms
  0
Ml +2 1
+1 1
0 1
−1 1
−2 1

S=1, L=1, J=2,1,0

3P2, 3P1, 3P0

  Ms
  +1 0 −1
Ml +1 1 1 1
0 1 1 1
−1 1 1 1

S=0, L=0, J=0

1S0

  Ms
  0
Ml 0 1
  • Fifth, applying Hund's rules, order the states by increasing order of energy:
3P0 < 3P1 < 3P2 < 1D2 < 1S0


[edit] Alternative method

An alternative, much quicker method of arriving at the same result can be obtained from group theory. The configuration 2p2 has the symmetry of the following direct product in the full rotation group SU3:

Γ(1) × Γ(1) = Γ(0) + [Γ(1)] + Γ(2),

which, using the familiar labels Γ(0) = S, Γ(1) = P & Γ(2) = D, can be written as

P X P = S + [P] + D.

The square brackets enclose the anti-symmetric square. Hence the 2p2 configuration has components with the following symmetries:

S + D (from the symmetric square and hence having symmetric spatial wavefunctions);
P (from the anti-symmetric square and hence having an anti-symmetric spatial wavefunction).

The Pauli principle and the requirement for electrons to be described by anti-symmetric wavefunctions imply that only the following combinations of spatial and spin symmetry are allowed:

1S + 1D (spatially symmetric, spin anti-symmetric)
3P (spatially anti-symmetric, spin symmetric).

Then one can move to step five in the procedure above, applying Hund's rules.

The group theory method can be carried out for other such configurations, like 3d2, using the general formula

Γ(j) X Γ(j) = Γ(2j) + Γ(2j-2) + ... + Γ(0) + [Γ(2j-1) + ... + Γ(1)].

The symmetric square will give rise to singlets (such as 1S, 1D & 1G), while the anti-symmetric square gives rise to triplets (such as 3P & 3F).

More generally, one can use

Γ(j) X Γ(k) = Γ(j+k) + Γ(j+k-1) + ... + Γ(|j-k|)

where, since the product is not a square, it is not split into symmetric and anti-symmetric parts. Where two electrons come from inequivalent orbitals, both a singlet and a triplet are allowed in each case.

[edit] See also

Retrieved from "http://en.wikipedia.org../../../t/e/r/Term_symbol.html"