TDR Class KN1
From Wikipedia, the free encyclopedia
With increased traffic around the turn of the 20th century, and on this railway cattle were far more important than passengers, the directors began looking for extra motive power. Taking into account that the line had only light trackwork, heavier locomotives were out of the question without changes to the wheel arrangement, although extra power could be made available with changes to the cylinders or boiler tubework to increase the heating surface and so the tractive effort. These two locomotives, built by Kerr Stuart at their California Works, Stoke-on-Trent, provided the extra motive power and retained the 2-6-0 wheel arrangement. On the amalgamation in 1925 these locomotives passed to the Great Southern Railways as their Class KN1
[edit] History
These two locomotives were delivered from the workshops of Kerr Stuart in 1902 and 1903. Like the Hunslet built locomotives (Class KN2) these were fitted out to be suitable for tramway working with "skirts covering the driving wheels and motion, cowcatchers, bell, headlight etc. The "skirts", normally a legal requirement for road - side tramways, were removed after only a short time to give crews easier access for lubrication of the motion etc. As photographc evidence does not show their return it must be presumed that the Board of Trade inspectors didn't get to this corner of Ireland very often.
They were delivered as Tralee & Dingle numbers 7 and 8, however No.8 was re-numbered as No.4 following the scrapping of the original, a Hunslet 0-4-2T, built in 1890 and withdrawn in 1902, although not scrapped for a further five years.
| Orig. No. | Re-No. | Builders | Works No. | Date | Scrapped | Notes |
|---|---|---|---|---|---|---|
| 7 | 7T | Kerr Stuart | 800 | 1902 | 1928 | |
| 8* | 4/4T | Kerr Stuart | 836 | 1903 | 1959 | CLR, 1941 |
- Originally numbered No.8. Re-numbered No.4 in 1907 when the original No.4, an 0-4-2T (Hunslet 514-1890) was scrapped (withdrawn in 1902).
CLR. Cavan & Leitrim Railway
[edit] Technical Details.
Driving Wheel Diameter............36"
Cylinders.........................12 1/2" x 20"
Working Pressure..................140 lb/sq.in.
[edit] Livery
T&D locomotives were painted dark green lined out with red between two cream lines and with red buffer beams. After the 1925 amalgamation the locomotives were painted in the standard GSR plain grey, the buffer beam remaining red.
