Schnabel car

From Wikipedia, the free encyclopedia

A Schnabel car is a specialized type of railroad freight car. It is designed to carry heavy and oversized loads in such a way that the load itself makes up part of the car. The load is suspended between the two ends of the cars by lifting arms; the lifting arms are connected to a pivot above an assembly of pivots and frames that carry the weight of the load and the lifting arm.

When a Schnabel car is empty, the two lifting arms are connected together, and the car can usually operate at normal freight train speeds. Some Schnabel cars include hydraulic equipment that will either lift or horizontally shift the load while in transit (at very low speeds) to clear obstructions along the car's route. There are 30 of this type of car in operation in North America, 31 in Europe and 26 in Asia.

CEBX 800, the largest railroad schnabel car ever built at over 800 tons capacity.
Enlarge
CEBX 800, the largest railroad schnabel car ever built at over 800 tons capacity.

The largest Schnabel car in operation, owned by ABB, carries road number CEBX 800, and is used in North America. It has 36 axles (18 for each half). Each half contains nine trucks which are connected by a complex system of span bolsters. Its tare (unloaded) weight is 370 tons. When empty, this car measures 231 ft 8 in (70.6 m) in length; it can carry loads up to 113 ft 4 in (34.5 m) long. For comparison, a conventional boxcar currently operating on North American railroads has a single two-axle truck at each end of the car, measures 50 to 89 ft (15.2 to 27.1 m) long and has a capacity of 70 to 105 tons.

[edit] External links

  • Schnabel cars – photos and technical information on Schnabel cars used worldwide.

[edit] References



Rail transport freight equipment
Enclosed equipment: Autorack · Boxcar · Coil car · Container · Covered hopper · Refrigerator car · Roadrailer · Stock car · Tank car
Open equipment: Flatcar · Gondola · Hopper car · Schnabel car
Non-revenue equipment: Caboose
In other languages