Ribbon microphone

From Wikipedia, the free encyclopedia

The sensitivity pattern of a bidirectional microphone (red dot) viewed from above.
Enlarge
The sensitivity pattern of a bidirectional microphone (red dot) viewed from above.

A Ribbon microphone is a type of dynamic microphone that uses a thin aluminum or duralum ribbon placed between the poles of a magnet and generate voltages by electromagnetic induction. Ribbon mics are typically bidirectional, meaning they pick up sounds equally well from either side of the microphone.

In the dynamic microphone, the diaphragm is attached to a light movable coil that generates a voltage as it moves back and forth between the poles of a permanent magnet.

In ribbon microphones a current is induced at right angles to both the ribbon velocity and magnetic field direction. As the sound wave causes the ribbon to move, the induced current in the ribbon is proportional to the particle velocity in the sound wave. The voltage output of older ribbon microphones is typically quite low compared to a dynamic moving coil microphone and a step-up transformer is used to increase the voltage output and increase the output impedance. Modern ribbon microphones do not suffer from this problem due to improved magnets and more efficient transformers, and have output levels that can exceed typical stage dynamic microphones.

Ribbon microphones are generally the most delicate and expensive microphone, but modern materials have been introduced that make present-day ribbon microphones durable enough for loud rock music and stage use. They are prized for their ability to capture high-frequency detail, comparing very favourably with condenser microphones, which can often sound subjectively "aggressive" or "brittle" in the high end of the frequency spectrum. Due to their bidirectional pickup pattern, ribbon microphones are often used in pairs to produce the Blumlein Pair recording array. In addition to the standard bidirectional pickup pattern, ribbon microphones can also be configured to have cardioid, hypercardioid, omnidirectional, and variable polar patterns.

One of the first ribbon microphones was the RCA PB-31. Produced in 1931, it was a breakthrough technology in sound, and revolutionized the recording and broadcast industry, setting a new standard in frequency response. The clarity and realism were unmatched by any of the condenser microphones of its day.

In other languages