Reduction of nitro compounds

From Wikipedia, the free encyclopedia

The chemical reactions described as reduction of nitro compounds can be facilitated by many different reagents and reaction conditions. Historically, the nitro group was one of the first functional groups to be reduced, due to the ease of nitro-group reduction.

Nitro-groups behave differently whether a neighboring hydrogen is present or not. Thus, reduction conditions can be initially classified by starting materials: aliphatic nitro compounds or aromatic nitro compounds. Secondary classifications are based upon reaction products.

Contents 1 Aliphatic nitro compounds 1.1 Reduction to hydrocarbons 1.2 Reduction to amines 1.3 Reduction to hydroxylamines 1.4 Reduction to oximes 2 Aromatic nitro compounds 2.1 Reduction to anilines 2.2 Reduction to hydroxylamines 2.3 Reduction to hydrazo compounds 2.4 Reduction to azo compounds 2.5 Reduction to azoxy compounds 3 References

[edit] Aliphatic nitro compounds

[edit] Reduction to hydrocarbons

Hydrodenitration (replacement of a nitro group with hydrogen) is difficult to achieve, but can be completed by catalytic hydrogenation over platinum on silica gel at high temperatures.^[1]

[edit] Reduction to amines

Aliphatic nitro compounds can be reduced to aliphatic amines using several different reagents:

• Catalytic hydrogenation using platinum oxide^[2] (PtO₂) or Raney nickel^[3]
• Iron metal in refluxing acetic acid^[4]
• Samarium diiodide^[5]

α,β-Unsaturated nitro compounds can be reduced to saturated amines using:

• Catalytic hydrogenation over palladium-on-carbon
• Iron metal
• Lithium aluminium hydride^[6] (Note: Hydroxylamine and oxime impurities are typically found.)

[edit] Reduction to hydroxylamines

Aliphatic nitro compounds can be reduced to aliphatic hydroxylamines using diborane.^[7]

[edit] Reduction to oximes

Nitro compounds are typically reduced to oximes using metal salts, such as stannous chloride^[8] or chromium(II) chloride^[9]. Additionally, catalytic hydrogenation using a controlled amount of hydrogen can generate oximes.^[10]

[edit] Aromatic nitro compounds

The reduction of aryl nitro compounds can be finely tuned to obtain a different products typically in high yields.

[edit] Reduction to anilines

Many methods for the production of anilines from aryl nitro compounds exist, such as:

• Catalytic hydrogenation using palladium-on-carbon^[11], platinum oxide, or Raney nickel^[12]
• Iron in acidic media^[13] (Note: Iron is particularly well suited for this reduction as the reaction conditions are typically gentle and also due to the fact that iron has a high functional group tolerance.)
• Sodium hydrosulfite^[14]
• Sodium sulfide (or hydrogen sulfide and base)
• Tin(II) chloride
• Titanium(III) chloride
• Zinc

It is also possible to form a nitroaniline by reduction of a dinitroarene using sodium sulfide.^[15]

Metal hydrides are typically not used to reduce aryl nitro compounds to anilines because they tend to produce azo compounds. (See below)

[edit] Reduction to hydroxylamines

Several methods for the production of aryl hydroxylamines from aryl nitro compounds exist:

• Raney nickel and hydrazine at 0-10 °C^[16]
• Electrolytic reduction^[17]
• Zinc metal in aqueous ammonium chloride^[18]

[edit] Reduction to hydrazo compounds

Treatment of nitroarenes with excess zinc metal results in the formation of N,N'-diarylhydrazine.^[19]

[edit] Reduction to azo compounds

Treatment of aromatic nitro compounds with metal hydrides gives good yields of azo compounds. For example, one could use:

• Lithium aluminium hydride^[20]
• Zinc metal with sodium hydroxide.^[19] (Excess zinc will reduce the azo group to a hydrazino compound.)

[edit] Reduction to azoxy compounds

[edit] References