Racing setup
From Wikipedia, the free encyclopedia
In auto racing, the racing setup or car setup is the set of adjustments made to the vehicle in order to optimize its behaviour (performance, handling, reliability, etc.). Adjustments can occur in suspensions, brakes, transmission , and many others.
[edit] Aftermarket modifications and adjustments to affect handling
- See also: car handling
| Component | Reduce Under-steer | Reduce Over-steer |
|---|---|---|
| Weight distribution | centre of gravity towards rear | centre of gravity towards front |
| Front shock absorber | softer | stiffer |
| Rear shock absorber | stiffer | softer |
| Front sway bar | softer | stiffer |
| Rear sway bar | stiffer | softer |
| Front tyre selection1 | larger contact area2 | smaller contact area |
| Rear tyre selection | smaller contact area | larger contact area2 |
| Front wheel rim width or diameter | larger2 | smaller |
| Rear wheel rim width or diameter | smaller | larger2 |
| Front tyre pressure | higher pressure | lower pressure |
| Rear tyre pressure | lower pressure | higher pressure |
| Front wheel camber | increase negative camber | reduce negative camber |
| Rear wheel camber | reduce negative camber | increase negative camber |
| Rear spoiler | smaller | larger |
| Front height (because these usually affect camber and roll resistance) |
lower front end | raise front end |
| Rear height | raise rear end | lower rear end |
| Front toe in | increase | decrease |
| Rear toe in | decrease | increase |
| 1) tyre contact area can be increased by using wider tyres, or tyres with fewer grooves in the tread pattern. Of course fewer grooves has the opposite effect in wet weather or other poor road conditions.
2) These also improve road holding, under most conditions. |
||
In addition, lowering the centre of gravity will always help the handling (as well as reduce the chance of roll-over). This can be done to some extent by using plastic windows (or none) and light roof, hood (bonnet) and boot (trunk) lid materials, by reducing the ground clearance, etc. Increasing the track with "reversed" wheels will have a similar effect, but remember that the wider the car the less spare room it has on the road and the farther you may have to swerve to miss an obstacle. Stiffer springs and/or shocks, both front and rear, will generally improve handling, at the expense of comfort on small bumps. Performance suspension kits are available. Light alloy (mostly aluminium or magnesium) wheels improve handling and ride as well as appearance.
Moment of inertia can be reduced by using lighter bumpers and wings (fenders), or none at all.
[edit] See also
- Car handling
- Vehicle dynamics
- Car tuning, the hobby of modifying a car
[edit] External links
 This motorsport-related article is a stub. You can help Wikipedia by expanding it. |
