Point source

From Wikipedia, the free encyclopedia

For other uses, see Point source (disambiguation).

A point source is a single identifiable localized source of something. A point source has negligible extent, distinguishing it from other source geometries. Sources are called point sources because in mathematical modelling, these sources can usually be approximated as a mathematical point to symplify analysis.

The actual source need not be physically small, as long as its size is negligible relative to other length scales in the problem. For example, in astronomy stars are routinely treated as point sources, even though they are in actuality much larger than the Earth.

In three dimensions, the density of something leaving a point source decreases in proportion to the inverse square of the distance from the source, as long as the distribution is homogeneous in all directions, and there is no absorption or other loss.

Contents

[edit] Mathematics

In mathematics, a point source is a singularity from which flux or flow is emanating. Although singularities such as this do not exist in the observable universe, mathematical point sources are often used as approximations to reality in physics and other fields.

[edit] Light

Generally a source of light can be considered a point source if the resolution of the imaging instrument is too low to resolve its size, or if the object is at a very great distance.

Examples:

[edit] Radio waves

Radio wave sources which are smaller than one radio wavelength are also generally treated as point sources. Radio emissions generated by a fixed electrical circuit are usually polarized, producing anisotropic radiation. As long as the propagating medium is lossless, however, the radiant power in the radio waves at a given distance will still vary as the inverse square of the distance as long as the angle remains constant with respect to the source polarization.

Examples:

[edit] Sound

Sound is an oscillating pressure wave. As the pressure oscillates up and down, an audio point source acts in turn as a fluid point source and then a fluid point sink. (Such an object does not exist physically, but is often a good simplified model for calculations.)

Examples:

[edit] Heat

A mushroom cloud as an example of a thermal plume. A nuclear explosion can be treated as a thermal point source in large-scale atmospheric simulations.
Enlarge
A mushroom cloud as an example of a thermal plume. A nuclear explosion can be treated as a thermal point source in large-scale atmospheric simulations.

In vacuum, heat escapes as radiation isotropically. If the source remains stationary in a compressible fluid such as air, flow patterns can form around the source due to convection, leading to an anisotropic pattern of heat loss. The most common form of anisotropy is the formation of a thermal plume above the heat source. Examples:

  • Geological hotspots on the surface of the Earth which lie at the tops of thermal plumes rising from deep inside the Earth
  • Plumes of heat studied in thermal pollution tracking.

[edit] Fluid

Fluid point sources are commonly used in fluid dynamics and aerodynamics. A point source of fluid is the inverse of a fluid point sink (a point where fluid is removed). Whereas fluid sinks exhibit complex rapidly changing behaviour such as is seen in vortices (for example water running into a plug-hole or tornados generated at points where air is rising), fluid sources generally produce simple flow patterns, with stationary isotropic point sources generating an expanding sphere of new fluid. If the fluid is moving (such as wind in air or currents in water) a plume is generated from the point source.

Examples:

  • Air pollution from a power plant flue gas stack in a large scale analysis of air pollution
  • Water pollution from an oil refinery wastewater discharge outlet in a large scale analysis of water pollution
  • Gas escaping from a pressurised pipe in a laboratory
  • Smoke is often released from point sources in a wind tunnel in order to create a plume of smoke which highlights the flow of the wind over an object
  • Smoke from a localised chemical fire can be blown in the wind to form a plume of pollution

[edit] Pollution

Sources of various types of pollution are often considered as point sources in large-scale studies of pollution.

In other languages