Pentagon

From Wikipedia, the free encyclopedia

Look up pentagon in Wiktionary, the free dictionary.
For other uses, see Pentagon (disambiguation).
For the headquarters of the United States Department of Defense, see The Pentagon.
A regular pentagon
Enlarge
A regular pentagon

In geometry, a pentagon is any five-sided polygon. However, the term is commonly used to mean a regular pentagon, where all sides are equal and all angles are equal (to 108°). Its Schläfli symbol is {5}.

The area of a regular pentagon with side length a is given by A = \frac{5a^2}{4}\cot \frac{\pi}{5} = \frac {a^2}{4} \sqrt{25+10\sqrt{5}} \approx 1.72048 a^2

[edit] Constructing a pentagon

A regular pentagon is constructible using a compass and straightedge, either by inscribing one in a given circle or constructing one on a given edge. This process was described by Euclid in his Elements circa 300 BC.

One method to construct a regular pentagon in a given circle is as follows:

Constructing a pentagon

  1. Draw a circle in which to inscribe the pentagon and mark the center point O. (This is the green circle in the diagram to the right).
  2. Choose a point A on the circle that will serve as one vertex of the pentagon. Draw a line through O and A.
  3. Construct a line perpendicular to the line OA passing through O. Mark its intersection with one side of the circle as the point B.
  4. Construct the point C as the midpoint of O and B.
  5. Draw a circle centered at C through the point A. Mark its intersection with the line OB (inside the original circle) as the point D.
  6. Draw a circle centered at A through the point D. Mark its intersections with the original (green) circle as the points E and F.
  7. Draw a circle centered at E through the point A. Mark its other intersection with the original circle as the point G.
  8. Draw a circle centered at F through the point A. Mark its other intersection with the original circle as the point H.
  9. Construct the regular pentagon AEGHF.

After forming a pentagon, if you join the non-adjacent corners (drawing the diagonals of the pentagon), you obtain a pentagram, with a smaller regular pentagon in the center. Or if you extend the sides until the non-adjacent ones meet, you obtain a larger pentagram.

An alternative method of construction is illustrated in the animation: Constructing a regular pentagon with compass and straightedge.

[edit] Some relevant trigonometric values

\sin \frac{\pi}{10} = \sin 18^\circ = \frac{\sqrt 5 - 1}{4}
\cos \frac{\pi}{10} = \cos 18^\circ = \frac{\sqrt{2(5 + \sqrt 5)}}{4}
\tan \frac{\pi}{10} = \tan 18^\circ = \frac{\sqrt{5(5 - 2 \sqrt 5)}}{5}
\cot \frac{\pi}{10} = \cot 18^\circ = \sqrt{5 + 2 \sqrt 5}
\sin \frac{\pi}{5} = \sin 36^\circ = \frac{\sqrt{2(5 - \sqrt 5)} }{4}
\cos \frac{\pi}{5} = \cos 36^\circ = \frac{\sqrt 5+1}{4}
\tan \frac{\pi}{5} = \tan 36^\circ = \sqrt{5 - 2\sqrt 5}
\cot \frac{\pi}{5} = \cot 36^\circ = \frac{\sqrt{5(5 + 2\sqrt 5)}}{5}


[edit] External links


Polygons
Triangle | Quadrilateral | Pentagon | Hexagon | Heptagon | Octagon | Enneagon (Nonagon) | Decagon | Hendecagon | Dodecagon | Triskaidecagon | Pentadecagon | Hexadecagon | Heptadecagon | Enneadecagon | Icosagon | Icosihenagon | Tricontagon | Pentacontagon | Hectagon | Chiliagon | Myriagon
Retrieved from "http://en.wikipedia.org../../../p/e/n/Pentagon.html"