Parallel Peripheral Interface

From Wikipedia, the free encyclopedia

You have new messages (last change).
This article is uncategorized.

Please help improve this article by adding it to one or more categories, so it may be associated with related articles (how?). Please remove this tag after categorizing.
This article has been tagged since December 2006.

[edit] PPI : Parallel Peripheral Interface

The PPI is a peripheral found on the Blackfin embedded processor.

The PPI is a half-duplex, bi-directional port that is designed to connect directly to LCDs, CMOS sensors, CCDs, video encoders (video DACs), video decoders (video ADCs) or any generic high speed, parallel device.

The width of the PPI is programmable and can be set between 8 and 16-bits in 1 bit increments. The latest Blackfin family (BF54x) also features a 18/24-bit PPI for direct connection to RGB LCD panels.

The PPI can run from 0MHz up to 66MHz.

The PPI has a dedicated clock pin, three multiplexed frame sync pins, and between 16 and 24 data pins.

Retrieved from "http://en.wikipedia.org../../../p/a/r/Parallel_Peripheral_Interface_981f.html"