Packard 200
From Wikipedia, the free encyclopedia
The Packard 200 was an automobile model produced by the Packard Motors Corporation of Detroit, Michigan during model years 1951 and 1952. Models in the 200 designation represented the least expensive Packard model range, on the firm's shortest wheelbase, and least powerful 288 cubic-inch 8-cylinder in-line engine.
Concurrently, the company also produced the Packard 250, which shared the same basic body and wheelbase as the 200, but was equipped with Packard's larger 327 cubic-inch 8-cylinder in-line engine.
Contents |
[edit] 1951 and 1952
The 1951 Packard 200 and 250 were introduced as Packard's least expensive model range on August 24, 1950, taking the place of the low-line Packard Standard models which were eliminated for the 1951 model year. The 200 debuted as part of the fully redesigned Packard line, attributed to John Reinhart. Replacing the bulbous 1948-1950 Packards in the 22nd and 23rd Packard Series, Reinhart's "High Pockets" design was more formal than its predecessor, and would serve Packard until the end of the 1956 model year when true Packard production ceased.
Both the 200 and the 250 were considered "junior" series cars, and were separated from the Packard 300 and Packard Patrician 400 models by their shorter wheelbases (122” versus 127”) and lesser trim appointments. Packard 200 standard models were available as a four-door sedan, two-door coupe and three-passenger business coupe (lacking a rear seat). While similar in appearance to the senior cars, the junior Packard lacked the noted Packard pelican hood ornament and had vertical tail lights instead of the horizontal units on the senior models. The junior models also lacked the wrap-around rear window feature found on senior Packard sedan models.
The 250 model range was introduced in March of 1951, and was specially designed to fill the vacuum of Packard having neither a hardtop or convertible in its 1951 model range. Besides their unique body styles, 250's received three jet-louvers on each rear-quarterpanel. Better grade trim and fabric were used within.
All Packard 200's came with twin horns, two sun visors, front and rear bumper guards, spare tire and jack set. Deluxe trim level included the spartan appointments found on the standard models, and added chrome wheel rings, and turn indications as standard. White-wall tires and full-wheel covers were also extra.
Items which have since become standard to the auto industry since the late 1960s such as heater, radio, tinted glass, carpeting, etc., were all optional on the Packard, as well as other premium cars during that era. Packard also became the first car-maker to offer power-brakes in 1951. “Easamatic” as they were trademarked, were a product of Bendix and an exclusive to Packard.
Changes for 1952 were minimal, and centered on the requisite annual trim updates. Packard did drop the Business Coupe, a move that other U.S. automakers were taking at the same time.
[edit] Damage to Packard caused by the 200 and 250 models
While Packard's overall sales for 1951 were over 100,000 units, too many of the units sold were low-line models in the 200 and 250 series. Senior Packards – the traditional prewar niche that Packard ruled in the 1920s and 1930s – offered during 1951 and 1952 were only available as two models, the 300 and the Patrician 400, both of which were only available in a single body type, the four-door sedan. Dealers, who were quick to appease their customers, sold Packard 300 and Patrician 400 model trim and applied it to the lesser Packard 200 and 250 models, diluting the Senior Packards of the visual uniqueness that separated them from lesser priced cars.
To remedy this, Packard hired James J. Nance, the CEO of Hotpoint to reestablish Packard as an automotive leader. Among Nance’s first moves was to begin building model identity by dropping the numeric model designations and renaming the entire range of models. Nance also saw to it that Senior Packards received broader visual cues and trim to separate themselves from lesser models. Nance also began creating different specialty and show cars in an attempt to create "buzz" in the automtive press and make Packard look less-moribund.
The 200 and 250 models were renamed the Packard Clipper Special and Clipper Deluxe, part of Nance’s plan to ultimately spin the cars off into their own make in 1956 as the Clipper and return the Packard name to a maker of strictly luxury automobiles.
[edit] 1951 and 1952 model production statistics
According to the Standard Catalog of American Cars, 1945-1975, Packard production numbers for both years on both models are not available by body style, and are thus aggregrate:
- 1951, 200 (Standard - all body styles), 24,310 units
- 1951, 200 (Deluxe - all body styles), 47,052 units
- 1951, 250 (all body styles) 4,640 units*
- 1952, 200 (Standard - all body styles), 39,720 units
- 1952, 200 (Deluxe - all body styles), 7,000 units
- 1952, 250 (all body models), 5,201 units
*Introduced in March 1951, partial model year tally.
[edit] Sources
- Gunnell, John, Editor (1987). The Standard Catalog of American Cars 1946-1975. Kraus Publications. ISBN 0-87341-096-3.
- Hamlin, George L. 1951-1954 Packard, American New Choice in Fine Cars. Collectible Automobile, February 1992, Volume 8, Number 5. pp.56-69.
 1899-1958 Category (edit) |
|
| Cars: | Packard 200 | Packard 300 | Packard Caribbean | Packard Cavalier | Packard Clipper | Packard Clipper Constellation | Packard Eight | Packard Light Eight | Packard Super Eight | Packard Executive | Packard Four Hundred | Packard Hawk | Packard One-Eighty | Packard One-Ten | Packard One-Twenty | Packard Patrician | Packard Six | Packard Twin Six/Twelve | Packard Station Sedan | Studebaker based Packards |
| Corporate: | Clipper | Packard | Studebaker-Packard Corporation| Ultramatic | Packard Panther | Packard Request |
| People: | Howard Darrin | James J. Nance | James Ward Packard | William Dowd Packard. |
