Orbital inclination change
From Wikipedia, the free encyclopedia
Orbital inclination change is an orbital maneuver aimed at changing the inclination of an orbiting body's orbit. This maneuver is also known as an orbital plane change as the plane of the orbit is tipped. This maneuver requires a change in the orbital velocity vector (delta v) at the orbital nodes (i.e. the point where the initial and desired orbits intersect, the line of orbital nodes is defined by the intersection of the two orbital planes).
Maximum efficiency of inclination change is achieved at apoapsis, (or apogee), where orbital velocity is the lowest. In general, inclination changes require the most delta v to perform, and most mission planners try to avoid them whenever possible to conserve fuel. This can sometimes be achieved by launching a spacecraft directly into the desired inclination, or as close to it as possible so as to minimize the inclination change required.
An important subtlety of performing an inclination change is that Keplerian orbital inclination is defined by the angle between ecliptic North and the vector normal to the orbit plane, (i.e. the angular momentum vector). This means that inclination is always positive and is entangled with other orbital elements primarily the argument of periapsis which is in turn connected to the longitude of the ascending node. This can result in two very different orbits with precisely the same inclination.
For the most efficient example mentioned above, targeting an inclination at apoapsis also changes the argument of periapsis. However, targeting in this manner limits the mission designer to changing the plane only along the line of apsis.
[edit] Calculation
In a pure inclination change, only the inclination of the orbit is changed while all other orbital characteristics (radius, shape.. etc) remains the same as before. Delta-v () required for an inclination change () can be calculated as follows:
- Δi = Δvi * sqrt(1 − e < sup > 2 < / sup > ) * cos(w + f) / n * a * (1 + e * cos(f))
where:
- is the eccentricity
- is the argument of perigee
- is the true anomaly
- is the mean motion
- is the semimajor axis
For more complicated maneuvers which may involve a combination of change in inclination and orbital radius, the amount of delta v is the vector difference between the velocity vectors of the initial orbit and the desired orbit at the transfer point.