Nuclear power in Canada

From Wikipedia, the free encyclopedia

Despite its small population Canada has an active and independent nuclear power and research sector. A leading exporter of uranium, Canada also exports nuclear technology within the terms of the Nuclear Non-proliferation Treaty, which it is a signatory to.

Contents

[edit] Power Generation

The province of Ontario dominates Canada’s nuclear industry, containing the vast majority of the country’s nuclear power generating capacity. Ontario has 16 operating reactors providing about 50% of the province’s electricity, plus two reactors undergoing refurbishment. Quebec and New Brunswick each have one reactor. Overall, nuclear power provides about 15% of Canada’s electricity (the majority of Canada’s energy is hydro-power [1]). The industry employs about 21,000 people directly and 10,000 indirectly. Canada’s nuclear energy production peaked in 1994 at 102.4 TWh, declined to 67 TWh by 1998 as reactors were mothballed, and increased to 85.6 TWh in 2005 due to improved reactor performance and refurbishment. Recently there has been renewed interest in nuclear energy, spurred by increasing demand (particularly within Ontario), and the desire to comply with Canada’s Kyoto Agreement obligations. The Government of Ontario proposed plans in 2004 to build several new nuclear reactors in the province. [2]

Natural Resources Canada oversees nuclear power R&D and regulation in Canada, with responsibility for the crown corporations Atomic Energy of Canada Limited (AECL) and the Canadian Nuclear Safety Commission (CNSC). AECL’s commercial operations include reactor development, design and construction of CANDU nuclear reactors, and provision of reactor services and technical support to CANDU reactors worldwide. Electricity planning and production are the responsibility of the individual provinces.

Canada’s Nuclear Waste Management Organisation, (NWMO) was set up in 2002 to investigate and develop an approach to the long-term management of nuclear fuel, which they did via a massive process of public consultation. The report, released in November 2005, recommended “Adaptive Phased Management” of nuclear waste, combining the interim shallow storage of waste, followed by the use of deep geological repositories with continuous monitoring of the used fuel and the potential to retrieve fuel from storage. [3]

Power generating stations are listed in List of Canadian nuclear facilities

[edit] Medical Radioisotopes

Currently, about 85% of the world's medical and industrial Cobalt-60 is produced in Canada. The medical-use Cobalt-60 is produced in the NRU research reactor at AECL's Chalk River Laboratories, while industrial-use Cobalt-60 is produced in selected CANDU power reactors (in these units some adjuster rods are made of Cobalt-59 for this purpose). Furthermore, over half the Cobalt-60 therapy machines and medical sterilizers in the world were built in Canada, treating over half a million patients yearly.

In addition to Cobalt 60, MDS Nordion also produces radioisotopes that are essential in diagnostic therapy. Some can be mixed chemically with other substances and injected into the body to allow physicians to “see” into the body, even the brain, lungs and organs that hitherto were inaccessible. Not only have these diagnostic techniques eliminated the need for much exploratory surgery, they have provided physicians with diagnostic capabilities that would otherwise have been impossible. Mild irradiation is also used to sterilize many medical supplies and some pharmaceuticals.

Canada was also a pioneer in the production of medical isotopes, and today produces most of the world's supply of Molybdenum-99, the "workhorse" and most commonly-used isotope in nuclear medicine. Today this isotope is generated in the NRU reactor; this is then supplied to MDS Nordion, a global supplier of radiopharmaceuticals based in Kanata, Ontario (near Ottawa). There are more than 4000 Mo-99 treatments daily in Canada, and 40,000 daily in the US. Canada produces about 60% of the global supply of molybdenum-99.

[edit] Uranium Production

Canada is the world’s largest producer of uranium with about one third of world production coming from Saskatchewan mines. There are two major players in the uranium mining sector:

Cameco operates the McArthur River mine, which started production at the end of 1999. Its ore is milled at Key Lake, which once contributed 15% of world uranium production but is now mined out. Its other former mainstay is Rabbit Lake mine, which still has some reserves at Eagle Point mine, where mining resumed in mid 2002 after a three-year break. An underground reserve replacement program is adding to reserves faster than they are being mined.

Areva Resources Canada operates the McClean Lake mine, which started production in mid 1999. Its Cluff Lake mine has now closed, and is being decommissioned.

In December 2004, the Cigar Lake Joint Venture (AREVA Resources Canada 37.1%, Cameco Corporation 50.025%, Idemitsu Uranium Exploration Canada Ltd. 7.875%, and TEPCO Resources 5%) partners agreed to proceed with development of the Cigar Lake uranium mine -the second largest known high-grade uranium deposit in the world, after McArthur River. With federal and provincial approvals in place, full construction began in January 2005.

All of Canada's uranium production now comes from the high-grade unconformity-type uranium deposits of the Athabasca Basin of northern Saskatchewan, such as Rabbit Lake, McClean Lake, McArthur River, and Cigar Lake.

The uranium industry invested at least CDN $3.5 billion during the 20th century, with capital investment in mines of CDN $2.5 billion, and exploration and predevelopment expenditures exceeding CDN $1 billion. Adjusting for inflation, there have been three investment booms. The first small one came with the initial developments in the Beaverlodge area in the 1950s. The second and largest boom was in the 1970s, with the opening of the Cluff and Rabbit lake mines, and the third was in the 1990s with the development of the higher grade ores on the east side. [4]

[edit] History

[edit] Uranium mining

Canada has a long history of uranium mining. Eldorado Mining and Refining Limited was among the earliest mining entities to work with radioactive ores. Originally owned by the gold prospector Gilbert Labine, Eldorado began to prospect for pitchblende ore in 1929 and set up the Port Radium mine in the Northwest Territories four years later. Initially worked for the then more valuable radium deposits, it also became Canada's first uranium-producing operation. When the demand for uranium increased during World War II, Eldorado became involved in further prospecting around Canada. An urgent need for uranium in quantity arose with the inception in 1942 of the Manhattan Project, the joint British-United States-Canadian undertaking which eventually brought forth the atomic bomb. Initially Canada's role was to supply uranium raw material.

The government nationalized the company in 1944. A year after establishing the Atomic Energy Control Board the government lifted the private prospecting ban that had been in force and offered incentives to private prospectors in 1946. This ushered in the "uranium rush", leading to over 10,000 radioactive ore discoveries, most notably the deposits in the Athabasca region of Saskatchewan.

Saskatchewan, once hailed as "The Saudi Arabia of the Uranium Industry", boasted five active mines within an area of about 200,000 square kilometers. The first of these mines was established in 1953, on the shores of Lake Athabasca. A full-fledged settlement was established near the mine and christened Uranium City. However, when the bottom fell out of the market the population dropped from a high of 4,000 in 1973, during the heyday of mining, to 200 in 1983, when the mining stopped.

In the late nineteen eighties, the Saskatchewan government restructured the uranium mining industry and largely divested its own interests to form Cameco in 1988. This would soon become the largest uranium mining company in the world with control over two thirds of the world's largest, high grade uranium mines at Key Lake and Rabbit Lake in Saskatchewan.

Due to the strategic importance of uranium, the industry is regulated at the federal level and falls under the jurisdiction of the Canadian Atomic Energy Control Board. In March, 1997, the Nuclear Safety and Control Act was passed and replacing previous legislation pertaining to nuclear safety.

[edit] Nuclear technology

The Nuclear industry (as opposed to the uranium industry) in Canada dates back to 1942 when a joint British-Canadian laboratory was set up in Montréal, Québec, under the administration of the National Research Council of Canada, to develop a design for a heavy-water nuclear reactor. This reactor was called National Research Experimental and would be the most powerful research reactor in the world when completed. In the meantime, in 1944, approval was given to proceed with the construction of the smaller ZEEP (Zero Energy Experimental Pile) test reactor at Chalk River, Ontario and on September 5, 1945 at 3:45 p.m., the 10 Watt ZEEP successfully achieved the first self-sustained nuclear reaction outside the United States. ZEEP operated for 25 years as a key research facility.

In 1946, Montreal Laboratory was closed, and the work continued at Chalk River Nuclear Laboratories. Building partly on the experimental data obtained from ZEEP, the National Research Experimental (NRX)—a natural uranium, heavy water moderated research reactor—started up on July 22, 1947. It operated for 43 years, producing radioisotopes, undertaking fuels and materials development work for CANDU reactors, and providing neutrons for physics experiments. It was eventually joined in 1957 by the larger 200 megawatt (MW) National Research Universal (NRU) reactor.

In 1952, the Canadian Government formed AECL, a Crown corporation with the mandate to develop peaceful uses of nuclear energy. A partnership was formed between AECL, Ontario Hydro and Canadian General Electric to build Canada's first nuclear power plant, called NPD for Nuclear Power Demonstration. The 20 MWe Nuclear Power Demonstration (NPD) started operation in 1962 and successfully demonstrated the unique concepts of on-power refuelling using natural uranium fuel, and heavy water moderator and coolant. These defining features formed the basis of a successful fleet of CANDU power reactors (CANDU is an acronym for CANada Deuterium Uranium) built and operated in Canada and elsewhere.

In the late 1960s (1967-1970), Canada also developed an experimental miniature nuclear reactor named SLOWPOKE (acronym for Safe Low-Power Kritical Experiment). The first prototype was built at Chalk River and many SLOWPOKEs were subsequently built, mainly for research. This reactor design is extremely safe and requires almost no maintenance (it is even licensed to operate unattended overnight); it can run for more than 20 years before the nuclear fuel needs replacement. There was an attempt at commercializing the reactor, as it could be used in remote areas or vehicles (research stations, electric-diesel submarines). Then, China entered the market with its SLOWPOKE-like reactor and thus, the project lost its commercial potential. Many SLOWPOKEs are still in use in Canada; there is one running at École Polytechnique de Montréal, for instance.

[edit] Radioisotopes

The existence of Canada's early nuclear program, and in particular the powerful NRX research reactor, nurtured a medical isotope and nuclear medicine R&D community at several locations across the country. Canada pioneered the Cobalt-60 cancer therapy technology that became standard medical practice throughout the world (the first Cobalt-60 cancer therapy was administered at the Royal Victoria Hospital in London, Ontario on October 27, 1951), and has also been involved in the development of accelerator-based cancer therapy technology.

[edit] Nuclear Waste Management

Canada’s used reactor fuel is now safely stored on an interim basis at licensed facilities located where the waste is produced. Like many other countries with nuclear power programs, Canada has yet to decide what to do with this used fuel over the long term.

On site storage options are expected to perform well over the near term; however, existing reactor sites were not chosen for their suitability as permanent storage sites. Furthermore, the communities hosting the nuclear reactors have a reasonable expectation that used nuclear fuel will eventually be moved.

In 2002 the Government of Canada passed a law requiring the owners of used nuclear fuel to create the Nuclear Waste Management Organization (Canada). Consistent with the Nuclear Fuel Waste Act (NFWA) it requires that the Organization engage citizens, specialists, stakeholders and the Aboriginal peoples in research and dialogue to assess the options for long-term management of this material.

[edit] Adaptive Phased Management

Adaptive Phased Management, Canada's approach to the issue, is the foundation for managing the risks and uncertainties that are inherent in the very long time frames over which used nuclear fuel must be managed, it tries to find an optimal balance between several competing objectives.

In summary the program commits the current generation of Canadians to take the first steps to manage the used nuclear fuel it has created. It allows sequential and collaborative decision-making, providing the flexibility to adapt to experience and technical change. It will provide a viable, safe and secure long-term storage capability, with the potential for retrievability of used fuel which can be exercised indefinitely until and if a decision is made in the future to seal the facility. Finally, it will provide for capacity to be transferred from one generation to the next.

Centralized containment and isolation of the used fuel and other high level waste will be in a deep geological repository in a suitable rock formation, such as the crystalline rock of the Canadian Shield or Ordovician sedimentary rock.

[edit] See also

[edit] External links

Retrieved from "http://en.wikipedia.org../../../n/u/c/Nuclear_power_in_Canada_8b7c.html"