Native resolution
From Wikipedia, the free encyclopedia
 |
This does not cite its references or sources. Please help improve this article by introducing appropriate citations. (help, get involved!) This article has been tagged since June 2006. |
-
"Pixel perfect" redirects here. For the Disney film, see Pixel Perfect.
The native resolution of a LCD, LCoS or other flat panel display refers to its single fixed resolution. As an LCD display consists of a fixed raster, it cannot change resolution to match the signal being displayed as a CRT monitor can, meaning that optimal display quality can be reached only when the signal input matches the native resolution. An image where the number of pixels is same as in the image source and where the pixels are perfectly aligned to the pixels in the source is said to be pixel perfect.
While CRT monitors can usually display images at various resolutions, a LCD monitor has to rely on interpolation (scaling of the image), which causes a loss of image quality. A LCD has to scale up a smaller image to fit into the area of the native resolution. This is the same principle as taking a smaller image in an image editing program and enlarging it; the smaller image loses its sharpness when it is expanded. This is especially problematic as most resolutions are in a 4:3 aspect ratio (640×480, 800×600, 1024×768, 1280×960, 1600×1200) but there are odd resolutions that are not, notably 1280×1024. If a user were to map 1024×768 to a 1280×1024 screen there would be distortion as well as some image errors, as there is not a one-to-one mapping with regards to pixels. This results in noticeable quality loss and the image is much less sharp.
Some resolutions work well, however, if they are exact multiples of smaller image sizes. For example, a 1600×1200 LCD will display an 800×600 image well, as each of the pixels in the image will be represented by a block of four on the larger display, without interpolation. Since 800×600 is an integer factor of 1600×1200, scaling will not adversely affect the image.
Because of native resolution, some people who play computer games refuse to use LCD monitors, since the native resolution is so high that it may cause frame rate issues when playing a game. However, standard resolutions that make up a perfect fraction of the native resolution can look better (e.g. 4 native pixels per pixel of small resolution).
Most LCD monitors are able to inform the PC of their native resolution using Extended display identification data (EDID). Some liquid crystal display televisions however, especially with 1366 x 768 pixels, fail to provide their native resolution and only provide a set of lower resolutions, resulting in a less than picture perfect output.
