Talk:Multimeter
From Wikipedia, the free encyclopedia
 |
This article is part of WikiProject Electronics, an attempt to provide a standard approach to writing articles about electronics on Wikipedia. If you would like to participate, you can choose to edit the article attached to this page, or visit the project page, where you can join the project and see a list of open tasks. |
It would be a nice historical note to add something about the AVOmeter, which was the ubiquitous predecesor to modern electronic multimeters. DFH 09:29:53, 2005-09-05 (UTC)
Meanwhile, here's a nice link. AVO Model 8 MkII with some historical information that I just found in the Richards Radios website. DFH 10:41:56, 2005-09-05 (UTC)
- I've added data about AVO, David. If you want to expand, proof, or correct it, please feel free to do so! -- Mikeblas 21:43, 8 January 2006 (UTC)
Contents |
[edit] Voltage on the screen
Isn't it strange to see 0.385V on the screen of the multimeter, when its probes are disconnected?! :)
- Turning on my Fluke True RMS multimeter (on mV) I get a jumpy reading myself. Right now it shows 0.2. You can play with it to hold a setting etc. but with my probes just lying there it still moves about a bit. Lsjzl 21:41, 8 June 2006 (UTC)
Isn't it that it has a battery bcoz of which it is showing this value ? —The preceding unsigned comment was added by Khemp (talk • contribs).
- No. A reading when the probes are not connected to anything is entirely normal. Voltage is the difference in electrical potential between two points. Since air doesn't conduct electricity, two points in space can have two different electrical potentials. The difference is very small, but the meter is able to measure the difference. -- Mikeblas 17:39, 1 December 2006 (UTC)
[edit] Definition of VOM
A publication my students use states the VOM is Volt-Ohm-Milliammeter. I think my Simpson operator's manual makes the same statement.
[edit] Request for Knowledge
I wonder if someone could be kind enough to add to this article whether the final two syllables of "multimeter" are pronounced like "millimeter" or "odometer", because I don't want to give those geeks at Radio Shack the satisfaction of knowing how clueless I am. :) Thanks in advance and feel free to delete this comment. MatthewDaly 18:49, 21 July 2006 (UTC)
- More like "meter" than "met her". I can't fix the article as I don't know IPA. -- Mikeblas 01:00, 22 July 2006 (UTC)
[edit] The article needs to be wikified
There are no sections other than external links, I think there should be more. --Adam1213 Talk + 02:13, 22 July 2006 (UTC)
- Feel free to edit it! -- Mikeblas 02:22, 22 July 2006 (UTC)
[edit] digits
The article says "For a modern DMM, such as a PC-based multimeter, the term "digits" actual maps to the noise performance of the device," and I can't make much sense of that. Can anyone expand on it or clarify it? -- Mikeblas 19:49, 13 September 2006 (UTC)
