Morse code

From Wikipedia, the free encyclopedia

1922 Chart of the Morse Code Letters and Numerals

Morse code is a method for transmitting information, using standardized sequences of short and long marks or pulses — commonly known as "dots" and "dashes" — for the letters, numerals, punctuation and special characters of a message. Originally created for Samuel Morse's electric telegraph in the mid-1830s, it was also extensively used for early radio communication beginning in the 1890s. However, with the development of more advanced communications technologies, the widespread use of Morse code is now largely obsolete, apart from emergency use and other specialized purposes, including navigational radio beacons, land mobile transmitter identification, and by CW (continuous wave) amateur radio operators.

Morse code can be transmitted in a number of ways: originally as electrical pulses along a telegraph wire, but also as an audio tone, as a radio signal with short and long pulses or tones, or as a mechanical or visual signal (e.g. a flashing light) using devices like an Aldis lamp or a heliograph. Morse code is transmitted using just two states — on and off — it was an early form of a digital code (however, it is technically not binary, as the pause lengths are also required to decode the information).

International Morse code is composed of six elements:

1. short mark, dot or 'dit' (·)
2. longer mark, dash or 'dah' (-)
3. intra-character gap (between the dots and dashes within a character)
4. short gap (between letters)
5. medium gap (between words)
6. long gap (between sentences)

Morse code is the only digital modulation mode designed to be easily read by humans without a computer, making it appropriate for sending automated digital data in voice channels, as well as making it ideal for emergency signaling, such as by way of improvised energy sources that can be easily "keyed" such as by supplying and removing electric power (e.g. by switching a breaker on and off). However, the variable length of the Morse characters made it hard to adapt to automated communication, so it has been largely replaced by more regular formats, including the Baudot code and ASCII.

What is called Morse code today actually differs somewhat from what was originally developed by Alfred Vail in collaboration with Morse. In 1848 a refinement of the code sequences, including changes to eleven of the letters, was developed in Germany and eventually adopted as the worldwide standard as "International Morse". Morse's original code specification, largely limited to use in the United States, became known as Railroad or American Morse code, and is now very rarely used except in some governmental programs/communications.

[edit] Development

Beginning in the mid-1830s, Samuel Morse and Alfred Vail developed an electric telegraph, which used electrical currents to control an electromagnet that was located at the receiving end of the transmission wire. The technological limits of the time made it impossible to print individual characters in a readable form, so the inventors had to devise an alternate method of communication. Beginning in 1837, William Cooke and Charles Wheatstone operated electric telegraphs in England, which also controlled electromagnets in the receivers, however, in their systems needle pointers were rotated in order to indicate the characters being sent. In contrast, Morse and Vail's initial telegraph system, which first went into operation in 1844, marked a paper tape — when an electrical current was transmitted the receiver's electromagnet rotated an armature, so that it began to scratch a moving tape, and when the current was removed the receiver retracted the armature, so that portion of the tape was left unmarked.

The Morse code was developed so that operators could translate the indentations marked on the paper tape into text messages. Initially, Morse had planned to only transmit numerals, and use a dictionary to look up each word according to the number which had been sent. However, the code was soon expanded to include letters and special characters, so it could be used for more complete messages. The shorter marks were called "dots", and the longer ones "dashes", and the letters most commonly used in the English language were assigned the shortest sequences.

In the original Morse telegraphs, the receiver's armature made a clicking noise as it moved into and out of position for marking the tape. Operators soon learned to directly read the clicks as the beginning and end of dots and dashes, meaning that it was no longer necessary to use the tape.

When Morse code was adopted to radio, the dots and dashes were normally sent as short and long tones. It was later found that people become more proficient at receiving Morse code when it is taught as a language that is heard, instead of one read from a page.^[1][2][3] To reflect the sound of Morse code, practitioners vocalise a dash as "dah", and a dot as "dit". When a dit is not the final element of a character, its sound is shortened to "di-" to maintain a better vocal rhythm.

Morse messages are generally transmitted by a hand-operated device such as a telegraph key, so there are variations introduced by the skill of the sender and receiver — more experienced operators can send and receive at faster speeds. In general, any code representing written symbols as variable length signals can be called a Morse code, but the term is used specifically for the two kinds of Morse code used for the English alphabet and associated symbols.

Telegraph companies charged based on the length of the message sent. Elaborate commercial codes were developed that encoded common phrases in five-letter groups that were sent as single words. Examples: BYOXO ("Are you trying to crawl out of it?") ^{[citation needed]}, LIOUY ("Why do you not answer my question?"), and AYYLU ("Not clearly coded, repeat more clearly."). The letters of these five-letter code words were sent individually using Morse code. In computer networking terminology one would say the commercial code is layered on top of Morse code, which in turn is layered on top of binary code, which in turn is layered on top of a physical telegraph wire. Still in use in amateur radio are the Q code and Z code; they were and are used by the operators themselves for service information like link quality, frequency changes, and telegram numbering.

When considered as a standard for information encoding, Morse code had a successful lifespan that has not yet been surpassed by any other electronic encoding scheme. Morse code was used as an international standard for maritime communication until 1999 when it was replaced by the Global Maritime Distress Safety System. When the French navy ceased using Morse code in 1997, the final message transmitted was "Calling all. This is our last cry before our eternal silence." See also: international distress frequency

Recently a few widely publicized speed contests have been held between expert Morse code operators and expert cellphone SMS text messaging users (see external links). Morse code has consistently won the contests, leading to speculation that cellphone manufacturers may eventually build a Morse code interface into cellphones. The interface would automatically translate the Morse code input into text so that it could be sent to any SMS capable cellphone so therefore the receiver of the message need not know Morse code to read it. Other speculated applications include taking an existing assistive application of Morse code and using the vibrating alert feature on the cellphone to translate SMS messages to Morse code for silent, hands free "reading" of the incoming messages. Several cellphones already have informative audible Morse code ring tones and alert messages, for example: many Nokia cellphones have an option to beep SMS in Morse code when it receives an SMS text message. These kinds of innovations could lead to a Morse code revival. There are third party applications already available for some cellphones that allow Morse code input for sending SMS (see external links).

[edit] Modern International Morse Code

The Modern International Morse code was invented by Friedrich Clemens Gerke in 1848 and used for the telegraphy between Hamburg and Cuxhaven in Germany. After some minor changes in 1865 it was standardised at the International Telegraphy congress in Paris (1865), and later made the norm by the ITU as International Morse code.

International Morse code is still in use today, although it has become almost exclusively the province of amateur radio operators, where it is commonly referred to as Continuous-Wave, or CW for short. The radio carrier signal is keyed on and off by the radio operator to forms the dits and dahs. Because only the carrier wave is transmitted, and the upper and lower sidebands are not used, CW can be sent and copied using very low bandwidth, and is easy to copy above the din of noise on virtually any amateur radio band. This makes CW extremely useful for DX transmissions (distance). DX operators may be separated by entire continents a half a world away. CW also is commonly used as a common language. Operators can communicate with surprising comprehension using CW pro-signs and abbreviations, even though they do not speak the same spoken language. Also, while phone (voice) and data transmissions are reserved for specific amateur radio bands, CW is the only form of communication that is permitted on all amateur bands—LF, MF, HF, UHF, and VHF. Until 2003 the International Telecommunications Union (ITU) mandated Morse code proficiency as part of the amateur radio licensing procedure throughout the world. In some countries, certain parts of the amateur radio bands are still reserved for transmission of Morse code signals only.

Since Morse relies on only an (on-off keyed) radio signal, it requires less complex equipment than other forms of radio communication, and it can be used in very high noise / low signal environments. It also requires less bandwidth than voice communications, typically 100-150 Hz, compared to the roughly 2400 Hz of single-sideband voice. The extensive use of pro-signs, Q codes, and restricted format of typical messages facilitates communication between amateur radio operators who do not share a common mother tongue and would have great difficulty in communicating using voice modes.

Morse code is also very popular among amateur radio operators using low-power transmitters (commonly called "QRP operators," from the Q-code for "reduce power") because it is especially well suited for low-power communication. Readability can be sustained by trained operators even when the signal is only faintly audible. The dits and dahs come through loud and clear above the noise, i.e. distorted phone (voice) transmissions, static, and other interference. This is due to the fact that the transmitted energy is concentrated into a very small bandwidth, making it possible to use narrow receiver filters, that suppress or eliminate interference on nearby frequencies. The narrow signal bandwidth also takes advantage of the natural aural selectivity of the human brain, further enhancing weak signal readability.

In the United States until 1991, a demonstration of the ability to send and receive Morse code at 5 words per minute (WPM) was required to receive an FCC amateur radio license. Demonstration of this ability is still required for the privilege to use the HF bands. Until 2000, proficiency at the 20 WPM level was required to receive the highest level of amateur license (Extra Class); effective April 15, 2000, the FCC reduced the Extra Class requirement to 5 WPM.^[4]

The World Radiocommunication Conference of 2003 (WRC-03) made the international Morse code requirement for amateur radio licensing optional.^[5] Many countries subsequently removed the Morse requirement from their licence requirements.^[6] In July 2005 the Federal Communications Commission published a Notice of Proposed Rulemaking that, if made a permanent FCC Rule, would eliminate all Morse code testing for amateur radio licensees in the USA. As with all informal rulemaking under the Administrative Procedures Act, it will take time for the Rule to go into effect, as a long Comment period must be observed. Most expect the period of Comment and debate to be contentious, as many amateur operators believe eliminating code testing to be detrimental and contrary to the heritage of radio, while others strongly hold that requiring code is outdated, and keeps new blood out of the hobby.

Amateur and military radio operators skilled in Morse code can often understand ("copy") code in their heads at rates in excess of 40 WPM. International contests in code copying are occasionally held. There are also several amateur clubs that require solid high speed copy, the highest of these has a standard of 60 WPM. In July 1939 at a contest in Asheville, North Carolina Ted R. Elroy set a still-standing record for Morse copying, 75.2 WPM.^[7] In his online book on high speed sending, William Pierpont N0HFF notes some operators may have passed 100 WPM. By this time they are "hearing" phrases and sentences rather than words. For a slower level, the American Radio Relay League offers a code proficency certification program that starts at 10 WPM.

A typical "straight key." This U.S. model, known as the J-38, was manufactured in huge quantities during World War II, and remains in widespread use today. In a straight key, the signal is "on" when the knob is pressed, and "off" when it is released. Length and timing of the dits and dahs are entirely controlled by the operator.

Vibroplex semiautomatic key. The paddle, when pressed to the right by the thumb, generates a series of dits, the length and timing of which are controlled by a sliding weight toward the rear of the unit. When pressed to the left by the knuckle of the index finger, the paddle generates a dah, the length of which is controlled by the operator. Multiple dahs require multiple presses. Left-handed operators use a key built as a mirror image of this one.

A commercially manufactured iambic paddle used in conjunction with an electronic keyer to generate high-speed Morse code, the timing of which is controlled by the electronic keyer. Manipulation of the paddles is as the Vibroplex, but pressing the right paddle generates a series of dahs. The actions are reversed for left-handed operators.

Although the traditional telegraph key (straight key) is still used by many amateurs, the use of semi- and fully-automatic electronic keyers (known as "bugs") is prevalent today. Computer software is also frequently employed to produce and decode Morse code RF signals. The fastest speed ever sent by a straight key was achieved in 1942 by Harry Turner W9YZE (d. 1992) who reached 35 WPM in a demonstration at a U.S. Army base.^[8]

As of 2006 commercial radiotelegraph licenses are still being issued in the United States by the Federal Communications Commission. Designed for shipboard and coast station operators, they are awarded to applicants who pass written examinations on advanced radio theory and show 20 WPM code proficiency [this requirement is waived for "old" (20 WPM) Extra Class licensees]. However, since 1999 the use of satellite and very high frequency maritime communications systems (GMDSS) have essentially made them obsolete.

On May 24, 2004, the 160th anniversary of the first telegraphic transmission, the ITU added the "@" (the "commercial at" or "commat") character to the Morse character set and is the digraph "AC" (probably to represent "A[T] C[OMMERCIAL]" or the letter "a" inside the swirl appearing to be a "C").^[9] The new character facilitates sending electronic mail addresses by Morse code and is notable since it is the first official addition to the Morse set of characters since World War I.

[edit] Morse code as an assistive technology

Morse code has a 21st century role as an assistive technology, helping people with a variety of disabilities to communicate. Morse can be sent by someone with severe motion disability, as long as they have some minimal motor control. In some cases this means alternately blowing into and sucking on a plastic tube ("puff and sip" interface). People with severe motion disabilities in addition to sensory disabilities (e.g. people who are deaf and/or blind, and have severe motion disabilities) can receive Morse through a skin buzzer. Products are available that allow a computer operating system to be controlled by Morse code, allowing the user access to the Internet and electronic mail.^[10]

In one case reported in the radio amateur magazine QST an old shipboard radio operator who had a stroke and lost the ability to speak or write was able to communicate with his physician (a radio amateur) by blinking his eyes in Morse. A better confirmed case occurred in 1966 when prisoner of war Jeremiah Denton, brought on television by his North Vietnamese captors, Morse-blinked the word TORTURE.

[edit] Representation and timing

There are two "symbols" used to represent letters, called dots and dashes or (more commonly among CW users) dits and dahs. The length of the dit determines the speed at which the message is sent, and is used as the timing reference. Here is an illustration of the timing conventions. Its intent is to show exact timing — it would normally be written something like this:

-- --- ·-· ··· ·   /      -·-· --- -·· ·
M  O   R   S   E  (space) C    O   D   E

where - represents dah and · represents dit. Here's the exact conventional timing for the same message (= represents signal on, . represents signal off, each for the length of a dit):

===.===...===.===.===...=.===.=...=.=.=...=.......===.=.===.=...===.===.===...===.=.=...=
   ^               ^    ^     ^               ^               ^
   |               dah  dit   dit             |               |
   symbol space                               word space      letter space

In text-book, full-speed Morse, a dah is conventionally 3 times as long as a dit. Spacing between dits and dahs in a character is the length of one dit. Spacing between letters in a word is the length of a dah (3 dits). Spacing between words is 7 dits.

Those learning Morse are often taught to send and understand letters and other symbols at their full target speed, that is with normal relative timing of the dots, dashes and spaces within each symbol for that speed. Exaggerated spaces between symbols and words are used to give 'thinking time', which can be reduced with practice and familiarity. This makes the sound 'shape' of the letters and symbols easier to learn. This teaching method is referred to as the Farnsworth method. Another popular teaching method is the Koch method, which uses the full target speed from the outset, but begins with just two characters. Once strings containing those two characters can be copied with 90% accuracy, an additional character is added, and so on until the full character set is mastered.

Morse code is often spoken or written as follows:

-- --- ·-· ··· · / -·-· --- -·· ·

Dah-dah dah-dah-dah di-dah-dit di-di-dit dit, Dah-di-dah-dit dah-dah-dah dah-di-dit dit.

Note that there is little point in learning to read written Morse as above, rather the sounds of all of the letters and symbols need to be learned, both to send and to receive.

The speed of Morse code is typically specified in "words per minute" (WPM). The Paris standard defines the speed of Morse transmission as the dot and dash timing needed to send the word "Paris" a given number of times per minute. The word Paris is chosen because it is precisely 50 "dits" based on the text book timing.

[edit] Letters, numbers, punctuation, prosigns

This article includes inline links to audio files. If you have trouble playing the files, see Wikipedia Media help.

The "@" symbol was added in 2004, and combines A and C into one character.

The "!" symbol is not officially recognized anywhere. The KW-conjunction -·-·-- was proposed in the 1980's by the Heathkit Company (a vendor of assembly kits for amateur radio equipment). While Morse code translation software prefers this version, on-air use is not yet universal as some amateur radio operators in Canada and the USA continue to prefer the older MN-conjunction ---· carried over from American landline telegraphy code.

[edit] Non-English extensions to the Morse code

[edit] Alternative display of more common characters for the international code

Some methods of teaching or learning morse code use the dichotomic search table below.

In order to understand the table, consider the second row: ·· is 'I'; ·- is 'A'; -· is 'N'; and -- is 'M'. You can follow a pattern of dots and dashes from the top and move left for dot and right for dash until the letter is complete.

A graphical representation of the dichotomic search table.

[edit] An amateur radio conversation in Morse code

The skill to have sensible conversations with Morse is more than knowing just the alphabet. To make communication efficient, there are many internationally agreed patterns of communication.

A sample CW conversation between station 1 (S1) and station 2 (S2)

S1:

CQ CQ CQ DE S1 K
Calling anyone (CQ), this is (DE) S1, listening (K)

S2:

S1 DE S2 K
Calling S1, this is S2, back-to-you (K)
(Now we have a connection)

S1:

S2 DE S1 = GA DR OM UR RST 599 HR = QTH TIMBUKTU = OP IS JOHN = HW? S2 DE S1 K
Good afternoon dear old man. You are RST 599 here.  
(Very readable (5), very strong signal (9), very good tone (9))
I'm located in Timbuktu. The operator's name is John.
How do you copy?

S2:

S1 DE S2 = TNX FB RPRT DR OM JOHN UR 558 = QTH HIMALAYA = NAME IS YETI S1 DE S2 K
Thanks for the nice report dear old man John. I read you 558.
I am in the Himalayas. My name is Yeti.

S1:

S2 DE S1 = OK TNX QSO DR YETI = 73 ES HPE CUAGN S2 DE S1 K
Okay, thanks for this conversation, dear Yeti.
Best regards and hope to see you again.

S2:

S1 DE S2 = R TU CUAGN 73 S1 DE S2 SK
Understood. Thank you. Best regards. (signing off)

With heavy use of the Q code and Morse Code Abbreviations, surprisingly meaningful conversations can be had. Note that very few English words have been used ("is" and "name"), only abbreviations. S1 and S2 might not speak the same native language.

Of course, real rag-chewing (lengthy conversations) cannot be done without a common language. On the worldwide amateur bands this is often English.

Contesters often use a very specialized and even shorter format for their contacts. Their purpose is to process as many contacts as possible in a limited time (e.g. 100-150 per hour).

[edit] Morse code in other media

It has been claimed that musicians learn the rhythms of the Morse code characters faster than non-musicians.^{[citation needed]} Morse code has been used in music, both as a source for rhythmic patterns and as recorded samples, such as Vladimir Ussachevsky's Wireless Fantasy and in the Rock band Rush's song YYZ, based on the Morse code for Toronto's Pearson International Airport's IATA airport code. Kraftwerk used Morse code extensively in the song Radioactivity. In On Her Majesty's Secret Service by the Propellerheads morse code is used to spell out OHMSS. During World War II, radio transmissions by the BBC started with the first four tones of Beethoven's Fifth Symphony, denoting "V" for "Victory" (that theme also highlights the opening sequences of the film The Longest Day.) The theme tune to the ITV television series Inspector Morse is another example, as is "Lucifer" by The Alan Parsons Project, where Morse code spells out the name of the album it's on ("Eve"). "(Oh Dear) Miss Morse" by Pearls Before Swine (band) uses Morse code to spell out the word fuck. And Canadian band Klaatu included a Morse code lyric in their song Sub-Rosa Subway. Also, some Cell Phones like Nokia have the word "SMS" as a ringtone for incoming short message service text messages. Most Nokia phones also have a ringtone called 'Ascending' which spells out their company slogan "Connecting People" in Morse code.

The Morse code during the Jericho television series title sequence spells out different messages in each episode. In the first three episodes, the messages were simply references to the episode itself: "Jericho Pilot" for the pilot episode, "Jericho Fallo" for the episode "Fallout", and "Jericho Three" for the third episode. However, in the fourth episode, "Walls of Jericho", the message was "He Knows Rob", a hint about the stranger seen in the teaser. In the fifth episode, "Federal Response", The message was "There is a fire", referring to either the fires in the town, or the firing of two missiles.

In the movie Independence Day, amateur radio operators are shown using CW Morse-code transmissions to communicate with other continents on the strategy for killing the alien invaders. The invaders were oblivious to the simple dot and dash encoding of the Morse Code.

[edit] See also

• Amateur radio
• 500 kHz
• SOS
• Wabun Code
• Heliograph
• Instructograph
• K9YA Telegraph
• Morse Code Mnemonics
• Telegraph key
• Q code
• Prosigns for Morse Code
• Morse Code Abbreviations
• Koch method
• Farnsworth method
• NATO phonetic alphabet

[edit] References

1. ^ http://www.arrl.org/FandES/ead/learncw/
2. ^ http://www.1728.com/morstest.htm
3. ^ http://www.arsqrp.com/ars/pages/back_issues/2000_text/1200_text/morse.html
4. ^ 1998 Biennial Regulatory Review — Amendment of Part 97 of the Commission's Amateur Service Rules.. Retrieved on December 4, 2005.
5. ^ http://www.iaru.org/rel030703att2.html
6. ^ http://www.nocode.org/articles.html
7. ^ The Art & Skill of Radio Telegraphy (April 20, 2002). Retrieved on 2006-04-21.
8. ^ The Telegraph Office. Retrieved on 2006-04-21.
9. ^ Please log in, or sign up for access. Retrieved on December 4, 2005.
10. ^ Morse2000 assistive communications site. Retrieved on December 4, 2005.

[edit] External links

The external links in this article may require cleanup to comply with Wikipedia's content policies. Please improve this article by removing excessive or inappropriate external links. Please remove this tag when this is done. This article has been tagged since October 2006. (talk)

• Morse Telegraph Club, Inc. (The Morse Telegraph Club is an international non-profit organization dedicated to the perpetuation of the knowledge and traditions of telegraphy.)
• FISTS - The International Morse Preservation Society
• K9YA Telegraph — A free monthly e-Zine all about ham radio
• FOC - First Class CW Operators' Club
• Morse code computer transmitter
• Learn Morse code in one minute
• Morse code resources
• Music and Morse code
• Nokia files patent for Morse Code-generating cellphone, March 12, 2005, Engadget.
• A race to the wire as old hand at Morse code beats txt msgrs, April 16, 2005, The Times Online.
• Nokia app lets you key SMSes in Morse Code, June 1, 2005 Boing Boing.
• Back to the Future — Morse Code and Cellular Phones, June 28, 2005 O'Reilly Network.
• Generate MIDI morse code ringtones for mobile phones and for Morse2Email messages, October 11, 2005
• Oldest manufacturer of American keyers
• Operating CW
• Tribute to Morse Telegraphy
• USB Morse Code Keyboard

[edit] Morse code translators and software

[edit] Learn Morse code:

• Morse Code Trainer and Translator with Sound
• Just Learn Morse Code
• Learn Morse Code with Factacular
• Koch Method Morse Code Trainer
• Morse Code Trainer for mobile phones
• Morse Code Tutor for Mac OS X
• PPCMorse Morse Code Tutor for PocketPC PDAs
• NuCode, a simple program designed to help you pass the F.C.C. 5-WPM test, and NuMorse Pro, a full-featured Morse Code teaching/improvement tool.
• MorseResource - quotation podcasts every day in Morse Code
• Morse Code and Phonetic Alphabets
• Superaldis, an Aldis lamp simulator
• UltraMorse, a free (gratis) Morse Code Trainer
• W1AW Code Practice Files
• Morse - learn morse code while browsing the net (Firefox Extension)
• Learn Morse Code Online

[edit] Translators

There are a number of translators on the Web that will convert text to Morse code, and play it via a PC:

• Entire books in English or Esperanto output as *.wav or *.ogg A multi-platform, open source script written in Perl
• Text to Morse code translator source code in C++ (Open source)
• Ward Cunningham's Morse trainer for Unix, PC and Mac (Open source)
• Stephen C Phillips' Java translator (Open source)
• Stephen C Phillips' non-Java translator
• Enhanced variant of Phillips' Java translator (Open source)
• A Morse code trainer for Windows 32 bit machines (Open source)
• Morse code for Esperanto
• Morse code characters of Russian/Greek/Hebrew/Arabic/Japanese/Korean/Esperanto
• Morse Code Music
• Morse code mnemonic chart
• Morse Quiz DOS software and Flash-based Vibroplex demo by AE4RV
• Morse code web translator
• This FireFox extension supports Morse code encoding/decoding/typing

For Palm OS devices:

• abcMorse is a mobile Morse code tutor as well as translator and reference tool for code tables, mnemonics, Q codes and ProSigns
• SpellMe features text to Morse Code converter

And for Symbian Series 60 smartphones:

• Tap in some Morse code and send it by SMS

Online Chat in morse code [1] Click on link for CW Communicator. No license needed, can use keyboard, or key connected to serial port or joystick to generate sound.