Macintosh Quadra 605

From Wikipedia, the free encyclopedia

A Macintosh Quadra 605
Macintosh Quadra 605
Manufacturer Apple Computer
Introduced October 21, 1993
Discontinued October 17, 1994
Price US$970, 1000, 1300
CPU Motorola 68LC040, 25 MHz
RAM 4 MB, expandable to 36 MB (official) or 132 MB (later), 80 ns 72-pin SIMM
OS Mac OS 7.1-7.5.1, 7.5.3, 7.5.5-8.1
Ports at the rear of a Quadra 605, including RJ45 Ethernet expansion.
Enlarge
Ports at the rear of a Quadra 605, including RJ45 Ethernet expansion.
Inside a Quadra 605 case.
Enlarge
Inside a Quadra 605 case.

The Quadra 605 is an entry level 68040 microprocessor-based Apple Macintosh personal computer code-named "Aladdin" or "Primus" which was released on October 21, 1993 as part of the Quadra series and discontinued on October 16, 1994. It was the lowest-model Quadra and one of few Macintoshes to not share a case with another machine, although the internal layout is shared with the Performa/LC 475 family.

Contents

[edit] Specifications

  • Central processing unit: 25 MHz MC68LC040, 32-bit bus. 8 KB of on-chip L1 Cache is divided into 4 KB of Data and 4 KB of Instruction cache. There are no other caches, although an L2 cache is possible via an LC PDS card. The 68LC040 can be replaced with a 68040 which includes onboard Floating Point Unit. This will provide approximately three times the speed in floating point operations[1].
  • Random access memory: 4 MB on the motherboard, one 72 pin SIMM socket for 80 ns or faster SIMMs. The official supported maximum RAM is 36 MB in one 72 pin SIMM, but larger SIMMs do work - up to 128 MB may be used, with some limits on RAM type[2]. Physical limits might apply if the side of the SIMM facing the CPU has thicker chips, as the clips on the SIMM socket will not close around it automatically. It should be possible to manually push the clips enough to hold the SIMM in place. The DJMEMC memory controller used in the Quadra 605s predecessors (Quadra/Centris 610, Quadra/Centris 650 and Quadra 800) will only recognize SIMMs up to 32 MB, while the newer MEMCjr used in the Quadra 605 recognizes the larger sizes.
  • Video: Video out is provided by one DA15F connector, and is compatible with VGA Monitors through the use of an adaptor[3]. Two internal Video RAM slots can take either two 256 KB 80 ns 68-pin VRAM SIMMs, or two 512 KB SIMMs. Installing one 512 KB and one 256 KB VRAM SIMM garbles the display. Resolutions and colors available with the two VRAM configurations are shown in the table below[4].
512 KB 1024 KB
512x384 Thousands Thousands
640x480 256 Thousands
640x870 16 256
832x624 256 Thousands
1024x768 16 256
1152x870 16 256
  • Audio
    • Out - stereo 8-bit, 11 kHz or 22 kHz
    • In - Line-level. The input socket is a stereo socket, and can input two channels of a stereo signal - however these are mixed and only accessible to the hardware as a combined mono 8-bit signal. An Apple PlainTalk Microphone provides line-level input by using a longer 4-contact plug which receives power from a 5 V supply within the input jack. Other microphones only give a mic-level input, and do not work with the Quadra 605.

Recording is possible at 11 or 22 k samples/second, with filters applied at 3.5 kHz and 7 kHz respectively while recording[5]. http://en.wikipedia.org/w/index.php?title=Quadra_605&action=edit&section=1

  • Floppy Drive: 1.4 MB SuperDrive, manual inject.
  • Battery: Quadra 605s take a lithium half-AA cell 3.6 V battery. If the battery is drained, the video will NOT start up.[6]. To start up a Quadra 605 with a flat or missing battery it can be turned on for a few seconds, then turn off for a second then on again. This leaves enough charge somewhere in the system for video to start up.
  • Power supply: 30 watts standard, but many second hand machines come with replacement PSUs, either third party, Apple replacement or stripped from earlier LC models. Some of these go up to 45 watts. The Quadra 605 is a registered Energy Star Compliant product[7].
  • Weight: 8.8 lb / 4 kg standard. A Quadra 605 can support a monitor up to 35 lb / 15.9 kg.[8]
  • Dimensions: 2.9" high x 12.2" wide x 15.3" deep / 7.4 cm high x 31 cm wide x 38.8 cm deep.

[edit] Expansion

The Quadra 605 contains one LC III style 68030-compatible LC Processor Direct Slot. While this is mechanically compatible with previous models' LC PDS (it will take 96-pin or 114-pin LC PDS slot cards) it is not a true LC PDS[9], but emulates the previous machine's 68030 slot. Due to the success of the LC PDS in earlier Macs and with many expansion options already manufactured Apple kept the same slot type in these 68040 machines[10]. While the Quadra 605's LC PDS is mostly 68030 compatible, expansion cards made specifically for 030 processors such as 68881 or 68882 FPUs will not work.

The Quadra 605 has one SCSI bus, with a 50 pin internal connector (with space for one low profile 3.5" SCSI device) and one 25-pin DB25F external connector. SCSI is provided by an NCR 53C96 controller, which can achieve 6 MB/s internally with a fast enough drive, or 4 MB/s externally.[11]

Two serial ports are provided on a Quadra 605; one 8 pin Mini DIN Printer port and one 9 pin Mini-DIN Modem port similar to the Printer port, but with an extra pin to supply +5 V power from the ADB power supply. Apple recommends no more than 100 mA should be drawn from this pin. [12]

The Quadra 605, like most other Macintoshes manufactured before 1999, includes an Apple Desktop Bus port for use with a keyboard/mouse or other low-speed low-power peripherals. Devices may be powered from the ADB port; Apple recommend a maximum combined current draw of 200 mA over a maximum of three ADB devices.[13]

Some earlier models also contain a ROM SIMM socket, located just to the left of the VRAM. No SIMMs were made for this slot, and most boards only contain the solder pads indicating its position. The ROMs as used in production machines are two surface mount chips located directly behind the CPU. Quadra 605s use a 1024 KB ROM[14], version 7C.[15]

[edit] PowerPC Upgrade

The Quadra 605 was compatible with Apple's Macintosh Processor Upgrade Card which provided a 50 MHz PowerPC 601 CPU. DayStar Digital and Sonnet manufactured 100 MHz versions of this card which could also be used in the Quadra 605.

Installation of these cards was inconvenient at best, as LC PDS expansion cards had to be removed in order to fit the processor upgrade.

[edit] Miscellaneous

Some Quadra 605s have a Cuda reset switch which is used to manually reset the PRAM, located towards the rear of the motherboard just to the front of the audio out port and labeled "S1". Others do not include this switch, instead having two solder pads within a silkscreened square.

The keyboard power-on key will not start up a Quadra 605 as there is no soft power-on. Only the rocker switch at the back will turn a Quadra 605 on or off. Pressing the power-on key while running is the same as selecting shut down in the Finder, and once a Quadra 605 has completed its shutdown process it will prompt the operator to manually turn it off.

Quadra 605s have no reset button or programmer's button, but key combinations can perform the same functions. To reset, users can hold down the Command, Control and Power keys. For a programmer's button click, users can hold down the Command and Power keys[16].

[edit] Gestalt IDs

The standard Gestalt ID for a 25 MHz Quadra 605 is 94[17]. The ID of the logic board that the Quadra 605 shares with other LC/Performa models depends on two things. Jumper J18 (located just behind the hard drive) will identify the computer as a Quadra 605 (ID 94 @ 25 MHz) if it is ON, and as a LC475/Performa 47x (ID 89 @ 25 MHz) if it is OFF. Over-clocking and under-clocking the motherboard also changes the Gestalt ID. A list of Gestalt IDs returned with various logic board modifications (speed as reported by Newer Technology's "Clockometer") are as follows

J18 Gestalt ID Name Speed
ON 93 20 MHz Quadra 605 19.93 MHz
ON 94 25 MHz Quadra 605 24.75 MHz
ON 95 33 MHz Quadra 605 32.89 MHz
OFF 86 20 MHz LC475 19.93 MHz
OFF 89 25 MHz LC475 24.75 MHz
OFF 90 33 MHz LC475 32.89 MHz

[edit] System software

The Quadra 605 is capable of running Mac OS versions 7.1, 7.1.1 (Pro), 7.5, 7.5.1, 7.5.3, 7.5.5, 7.6, 7.6.1, 8.0 and 8.1. Versions of System Software below 7.5 require the use of System Enabler 065[18]. If a Quadra 605 is running a version of System 7.1, over-clocking it from the standard 25 MHz to 33 MHz will change the gestalt ID, but the enabler will recognise the new ID. Under-clocking to 20 MHz however will change the gestalt ID to one the enabler doesn't recognise as compatible, and the system won't boot. System 7.5+ is not affected by this issue.

[edit] See also

[edit] Footnotes

[edit] References

[edit] External links

In other languages