List of battery sizes
From Wikipedia, the free encyclopedia
|
- This article refers to common battery types and sizes in household and light industrial use.
Battery size generally refers to the shape, voltage, and terminal layout of a battery. Thus the term "size" has become interchangeable with "type". Batteries of different types will usually not have the same dimensions and terminal layout.
[edit] Battery chemistry
New battery chemistries have strained the original common naming conventions. In all old batteries the voltages were in increments of 1.5 volts, which reflected the number of individual cells in the battery. Newer chemistries such as rechargeable NiCd and NiMH typically output 1.25 volts per cell. Some devices may not run properly on rechargeable batteries, but most handle them reasonably well. Other devices have exceptionally high drain rates and require a lithium type battery to run properly. Many new battery sizes refer to both the batteries' size and chemistry, while older names do not. For a more complete list see battery types. This summary is only for types relating to battery "sizes" types).
[edit] Battery chemistry primary
(charge density order)
Chemistry | Cell Voltage |
Comments |
---|---|---|
Zinc-carbon | 1.5 | Inexpensive |
Zinc-chloride | 1.5 | Inexpensive |
alkaline (zinc-manganese dioxide) |
1.5 | Moderate energy density Good for high and low drain uses |
Lithium (lithium-iron disulfide) LiFeS2 |
1.5 | Expensive Used in 'plus' or 'extra' batteries |
Lithium (lithium-manganese dioxide) LiMnO2 |
3.0 | Expensive Only used in high-drain devices or for long shelf life due to very low rate of self discharge. 'Lithium' alone usually refers to this type of chemistry. |
Mercury oxide | 1.35 | High drain and constant voltage Banned in most countries because of health concerns |
Zinc-air | 1.35-1.65 | Mostly used in hearing aids |
Silver oxide (silver-zinc) | 1.6 | Very expensive Only used commercially in 'button' cells |
[edit] Battery chemistry rechargeable
(charge density order) |
||
Chemistry | Cell voltage |
Comments |
---|---|---|
NiCd | 1.2 | Inexpensive High/low drain, moderate energy density Moderate rate of self discharge |
NiMH | 1.2 | Expensive, high drain devices High rate of self discharge |
Lithium ion | 3.6 | Very expensive Very high energy density Not usually used in 'common' battery sizes Very common in laptop computers, moderate to high-end digital cameras and camcorders, and cellphones Very low rate of self discharge |
[edit] Brand models
Even more confusing is that many manufacturers assign their own names and numbers to their batteries in disregard of common, colloquial, IEC, and ANSI naming conventions (See LR44 battery as an example). Many times this is to steer customers towards their brand and away from competitors by obfuscating the common name for a battery. For instance, if your TV remote needs a new battery and inside the battery compartment it says, "Replace with CX472 type battery", many customers will get that specific type, which is a product model for a common battery from a specific company, not knowing that many other companies also make that exact same battery. In this article brand models have been purposefully omitted to avoid confusion.
[edit] Table of battery sizes
Common name |
Colloquial name |
IEC Name |
ANSI/NEDA Name |
Typical Capacity (mAh) |
Nominal Voltage | Shape | Terminal layout | Dimensions | Comments |
---|---|---|---|---|---|---|---|---|---|
123 | Camera Battery CR123 |
CR17354 (Lithium) | 5018LC (Lithium) | 1500 (Lithium) 700 (Li-Ion) |
3 | Cylinder | + Nub cylinder end - Flat opposite end |
L 34.5mm D 17mm |
123 always implies lithium chemistry |
4.5 Volt | Bardic Lamp Battery Pocketable Battery 1203 |
3LR12 (alkaline) 3R12 (carbon-zinc) |
4.5V (any) MN1203 (manganese) |
2500 (alkaline) 1200 (carbon-zinc) |
4.5 (always) | Flat pack | + short terminal strip - long terminal strip |
H 70mm L 60mm W 22mm |
May be replaced by 3 AA cells using a plastic stub enclosure (not practical) |
9 Volt | PP3 9-Volt Radio battery |
6LR61 (alkaline) 6F22 (carbon-zinc) 6KR61 (NiCd) |
1604A (alkaline) 1604D (carbon-zinc) 1604LC (Lithium) 11604 (NiCd) 7.2H5 (NiMH) |
565 (alkaline) 400 (carbon-zinc) 1200 (lithium) 120 (NiCd) 175 (NiMH) 500 (Lithium polymer rechrg) |
9 7.2 (NiCd) 7.2 (NiMH) 8.4 (some NiCd and NiMH) |
Rectangular | both small end + male clasp - female clasp |
H 48.5mm L 26.5mm W 17.5mm |
|
AA | Penlight Mignon |
LR6 (alkaline) R6 (carbon-zinc) FR6 (Lithium-FeS2) KR157/51 (NiCd) |
15A (alkaline) 15D (carbon-zinc) 15LF (Lithium-FeS2) 10015 (NiCd) 1.2H2 (NiMH) |
2700 (alkaline) 1100 (carbon-zinc) 3000 (Lithium-FeS2) 600-1000 (NiCd) 1700-2900 (NiMH) |
1.5 1.2 (NiCd) 1.2 (NiMH) |
Cylinder | + Nub cylinder end - Flat opposite end |
L 51mm D 15mm |
C7/HP7; |
AAA | Microlight Potlood |
LR3 (alkaline) R3 (carbon-zinc) |
24A (alkaline) 24D (carbon-zinc) |
1200 (alkaline) 540 (carbon-zinc) 800-1000 (Ni-MH) |
1.5 | Cylinder | + Nub cylinder end - Flat opposite end |
L 44.5mm D 10.5mm |
C16/HP16; |
AAAA | LR8D425 (alkaline) | 25A (alkaline) | 625 (alkaline) | 1.5 | Cylinder | + Nub cylinder end - Flat opposite end |
L 42.5mm D 8.3mm |
Obscure type sometimes used in 'pen flashlights' or in bundles inside of regular 9-volts | |
C | Mignon | LR14 (alkaline) R14 (carbon-zinc) |
14A (alkaline) 14D (carbon-zinc) |
8000 (alkaline) 3800 (carbon-zinc) |
1.5 | Cylinder | + Nub cylinder end - Flat opposite end |
L 50mm D 26.2mm |
C11/SP11/HP11; Can be replaced with alkaline AA cell using plastic sabot (stub case) |
See naming notes below about CR battery types | |||||||||
CR927 | 30 (Lithium) | 3 | Coin | + bottom/sides - top |
D 9.5mm H 2.7mm |
This obscure type of lithium coin cell is used extensively in blinkies. | |||
CR1620 | CR1620 (Lithium) | 3 | Coin | + bottom/sides - top |
D 16mm H 2.0mm |
||||
CR1225 | CR1225 (Lithium) | 50 | 3 | Coin | + bottom/sides - top |
D 12.5mm H 2.5 mm |
Standart discharge current: 0.2mA. Maximum discharge current: 1mA. Maximum pulse discharge current: 5mA. | ||
CR2016 | CR2016 (Lithium) | 5000LC (Lithium) | 90 (Lithium) | 3 | Coin | + bottom/sides - top |
D 20mm H 1.6mm |
Standard Discharge Current: 0.1 mA. Often used in pairs instead of CR2032 for devices that require more than 3 volts, like blue/white LED flashlights. CAUTION: Using 2 CR2016 when not specified can damage a device. | |
CR2025 | CR2025 (Lithium) | ? (Lithium) | 160 (Lithium) | 3 | Coin | + bottom/sides - top |
D 20mm H 2.5mm |
Standard Discharge Current: 0.2 mA. Often can be substituted with a CR2032, which is slightly higher and lasts longer. Be careful not to break the battery compartment. | |
CR2032 | CR2032 (Lithium) | 5004LC (Lithium) | 225 (Lithium) | 3 | Coin | + bottom/sides - top |
D 20mm H 3.2mm |
Standard Discharge Current: 0.2 mA. Maximum discharge current: 3mA. Maximum pulse discharge current: 15mA. Common battery in computers to keep the date and CMOS settings current when power is off. | |
CR2450 | CR2450 (Lithium) | 5029LC (Lithium) | 610 (Lithium) | 3 | Coin | + bottom/sides - top |
D 24.5mm H 5.0mm |
Portable devices requiring high current (30 mA) and long shelf life (up to 10 years) | |
D | Goliath Flashlight Battery |
LR20 (alkaline) R20 (carbon-zinc) |
13A (alkaline) 13D (carbon-zinc) |
19500 (alkaline) 8000 (carbon-zinc) |
1.5 | Cylinder | + Nub cylinder end - Flat opposite end |
L 61.5mm D 34.2mm |
C2/SP2/HP2; Can be replaced with alkaline AA cell using plastic sabot (stub case) |
J | 4LR61 (alkaline) | 1412A (alkaline) | 625 (alkaline) | 6 | Square with missing corner |
Flat contacts - top side + missing corner |
H 48.5mm L 35.6mm W 9.18mm |
||
Lantern (Spring) | Lantern 6 Volt Spring Top |
4R25Y (alkaline) 4R25 (carbon-zinc) |
908A (alkaline) 908D (carbon-zinc) |
26000 (alkaline) 10500 (carbon-zinc) |
6 | Square | Springs Top - Corner + Center |
H 115mm L 68.2mm W 68.2mm |
Springs are usually made so that leads for screw top can be fastened to them. In most applications this is fine (see next). |
Lantern (Screw) | Lantern 6 Volt Screw Top |
4R25Y (alkaline) 4R25 (carbon-zinc) |
915A (alkaline) 908 (carbon-zinc) |
26000 (alkaline) 10500 (carbon-zinc) |
6 | Square | Screw Posts Top - Corner + Center |
H 115mm L 68.2mm W 68.2mm |
For uses that have high vibration/shock where the leads may be knocked off of springs. |
Lantern (Big) | 918 R25-2 Big Lantern Double Lantern |
4LR25-24 (alkaline) 4R25-2 (carbon-zinc) 8R25 (carbon-zinc) |
918A (alkaline) 918D (carbon-zinc) |
52000 (alkaline) 22000 (carbon-zinc) |
6 | Square | Screw posts Apart top |
H 127mm L 136.5mm W 73mm |
|
N | Lady | LR1 (alkaline) | 910A (alkaline) | 1000 (alkaline) | 1.5 | Cylinder | + Nub cylinder end - Flat opposite end |
L 30.2mm D 12mm |
|
See Naming Notes below about SR/LR battery types | |||||||||
SR41 | AG3 LR41 |
LR41 (alkaline) SR41 (silver-oxide) |
1135SO (silver-oxide) 1134SO (silver-oxide) |
32 (alkaline) 42 (silver-oxide) |
1.50 (alkaline) 1.55 (silver-oxide) |
Button | + bottom/sides - top |
D 7.9mm H 3.6mm |
|
SR43 | AG12 LR43 |
LR43 (alkaline) SR43 (silver-oxide) |
1133SO (silver-oxide) 1132SO (silver-oxide) |
80 (alkaline) 120 (silver-oxide) |
1.50 (alkaline) 1.55 (silver-oxide) |
Button | + bottom/sides - top |
D 11.6mm H 4.2mm |
|
SR44 | AG13 LR44 |
LR44 (alkaline) SR44 (silver-oxide) |
1166A (alkaline) 1107SO (silver-oxide) 1131SOP (silver-oxide) |
150 (alkaline) 200 (silver-oxide) |
1.50 (alkaline) 1.55 (silver-oxide) |
Button | + bottom/sides - top |
D 11.6mm H 5.4mm |
|
SR48 | AG5 | SR48 (silver-oxide) | 1136SO (silver-oxide) 1137SO (silver-oxide) |
70 (silver-oxide) | 1.55 (silver-oxide) | Button | + bottom/sides - top |
D 7.9mm H 5.4mm |
|
SR54 | AG10 LR54 |
LR54 (alkaline) SR54 (silver-oxide) |
1138SO (silver-oxide) | 100 (alkaline) 85? (silver-oxide) |
1.50 (alkaline) 1.55 (silver-oxide) |
Button | + bottom/sides - top |
D 11.6mm H 3.1mm |
|
SR60 | AG1 | SR60 (silver-oxide) | 1175SO (silver-oxide) | 20 (silver-oxide) | 1.55 (silver-oxide) | Button | + bottom/sides - top |
D 6.8mm H 2.15mm |
|
SR66 | AG4 | SR66 (silver-oxide) | 1176SO (silver-oxide) | 26 (silver-oxide) | 1.55 (silver-oxide) | Button | + bottom/sides - top |
D 6.8mm H 2.6mm |
[edit] Naming notes
- SR# / LR# / AG# Button Cells: IEC SR series batteries are silver oxide chemistry and have 1.55 volts, while IEC LR series batteries are alkaline chemistry and have 1.5 volts. Since there are no 'common' names beyond the AG# designation, many places use these three terms interchangeably, and they will all fit and work. The only difference is that the SR series typically have twice the mAh as the LR series. In low-drain devices like watches (without lights) this isn't very important, but in high-drain devices like blinkies, key chain flashlights, or laser pointers the SR type is preferred. Typically SR and LR will be the same price unless one buys in wholesale volume so there is no reason not to get the SR version. Often the free 'demo' batteries that come with a device are the LR version.
- IEC CR# series: Denotes lithium-manganese dioxide chemistry. Since LiMnO2 cells produce 3 volts there are usually no alternate chemistries for a CR# coin battery. Conversely one LiMnO2 cell can replace two alternate chemistry cells, in a 3, 6, 9, or 12 volt battery. CR cell numbers correlate with the cell dimensions, being the diameter in millimetres (except for the extra half millimetre in some cases) followed by the height in tenths of a millimetre.
- Button / Coin / Miniature: In many places these are used interchangeably.
[edit] See also
- 9 volt battery
- AA battery
- AAA battery
- AAAA battery
- LR44 battery (Good example of manufacturer naming versus IEC/ANSI naming)
- Button cell
- A battery (vacuum tubes)
- B battery (vacuum tubes)
- C battery (vacuum tubes)
- Commons:Category:Batteries
[edit] External links
- Energiser/Eveready Data Sheets
- Radio Shack Useful for cross referencing common/IEC/ANSI and manufacturer numbers of batteries. NOTE: Sometimes there are small inaccuracies pertaining to button/coin cell battery names. These naming problems are industry wide.
- Battery Force Also useful, Same note as for Radio Shack.
- The Small Battery Company Some obscure button size equivalents.
- The relevant US standard is ANSI C18.1 American National Standard for Dry Cells and Batteries-Specifications.
[edit] References
- IEC 60086-1: Primary batteries - Part 1: General
- IEC 60086-2: Primary batteries - Part 2: Physical and electrical specifications
- IEC 60086-3: Primary batteries - Part 3: Watch batteries
- IEC 60086-4: Primary batteries - Part 4: Safety of lithium batteries
- ANSI C18.1, Part 1 Portable Primary Cells and Batteries With Aqueous Electrolyte - General and Specifications
- ANSI C18.1, Part 2 Portable Primary Cells and Batteries With Aqueous
Electrolyte ? Safety Standard
- ANSI C18.2, Part 1 Portable Rechargeable Cells and Batteries - General and Specifications
- ANSI C18.2, Part 2 Portable Rechargeable Cells and Batteries ? Safety
Standard
- ANSI C18.3, Part 1 Portable Lithium Primary Cells and Batteries - General and Specifications
- ANSI C18.3, Part 2 Portable Lithium Primary Cells and Batteries ? Safety Standard