Level junction

From Wikipedia, the free encyclopedia

In U.S. railroad practice, a level junction (or in the United Kingdom a flat junction) is a railway junction that has a track configuration in which merging or crossing railroad lines provide track connections with each other that require trains to cross over in front of opposing traffic at grade. The structure is sometimes called a diamond junction or diamond crossing in reference to the diamond-shaped center. Routings must be controlled by signals and an interlocking plant, or by an automated Centralized Traffic Control (CTC) system. The two tracks need not be of the same gauge.

The components of an abandoned level junction assembly sit beside the current BNSF Railway main line in Orange, California. The structure at one time allowed trains of the Atchison, Topeka and Santa Fe Railway and Southern Pacific Railroad to cross over one another's lines.

A fully assembled level junction sits in the foreground. It will replace the one in the background where Union Pacific and Kansas & Oklahoma tracks cross.

This temporary level junction allows Sacramento Southern Railroad trains to pass over the Union Pacific tracks in Sacramento, California. The components must be installed, railroad cars moved, and the assembly dismantled in less than 30 minutes so as not to impede UPRR freight and Amtrak passenger train movement along the main line.

A schematic diagram of a dual-gauge diamond crossing.

Level junctions, particularly those of fine angles or near right angles, create derailment risks and impose speed restrictions. The former can occur as the flanges of the wheels are momentarily unsupported and unguided and can slip through the gaps in the rails, and the latter due to the fact that the assembly contains elements that can break or vibrate loose. Level junctions are considered a maintenance issue by railroad companies as the inherent gaps tend to be hard on locomotive and rolling stock wheelsets. Switched diamonds partially solve these problems, but introduce some new problems. If possible, diamonds should be replaced by a pair of turnouts.

The opposite of a level junction is a flying junction, where individual tracks rise or fall to pass over or under other tracks.

1 Examples
2 Drawbridge crossing
3 Double junction
4 See also

[edit] Examples

Flat crossings are particularly common in the United States where the lines of one company cross the lines of another company, and there is no particular need for the lines to be connected for through traffic.

A notable example is Newark flat crossing, United Kingdom, which is on the East Coast Mainline, and the Lincoln to Nottingham line. It is certainly the fastest in the UK, with East Coast trains allowed to do 100mph (160 km/h) over the crossing.

[edit] Drawbridge crossing

In Queensland, Australia flat crossings between narrow gauge cane tramways and main lines are being replaced by drawbridges so that the rails of the main line are completely unbroken by gaps or weak spots; this allows the main line speeds to be raised.