Lake Superior agate
From Wikipedia, the free encyclopedia
The Lake Superior Agate is Minnesota's State Gem. It is a type of agate stained by iron and found on the shores of Lake Superior. Its wide distribution and iron-rich bands of color reflect the state gemstone's geologic history in Minnesota.
In 1969 the Lake Superior agate was designated by the Minnesota Legislature as the official state gemstone as a result of a campaign by Mrs. Jean Dahlberg, an ardent fan of the agate. She developed a groundswell of support and provided a compelling case in testimony before the state legislative committee considering the bill. The Lake Superior Agate prevailed over several other logical candidates
- Red Binghamite and Yellow silkstone, both iron-rich jaspers found in the Cuyuna iron range area, were logical selections.
- Thomsonite, the beautiful and popular zeolite mineral found only in Minnesota on an isolated stretch along Lake Superior.
- Pipestone, crafted into peace pipes by Indians in Pipestone, was another possibility.
The Lake Superior agate was selected because the agate reflects many aspects of Minnesota. It was formed during lava eruptions that occurred in Minnesota about a billion years ago. The stone's predominant red color comes from iron, a major Minnesota industrial mineral found extensively throughout the Iron Range region. Finally, the Lake Superior agate can be found in many regions of Minnesota as it was distributed by glacial movement across Minnesota 10,000 to 15,000 years ago.
Contents |
[edit] Geologic History
More than a billion years ago, the North American continent began to split apart along plate boundaries. Molten lava upwelled into iron-rich lava flows in what is now the the Minnesota Iron Range region. These flows now are exposed along the north and south shores of Lake Superior. The tectonic forces that attempted to pull the continent apart, and which left behind the lava flows, also created the Superior trough, a depressed region that became the basin of Lake Superior.
The magma flows formed the conditons for creation of Lake Superior agates. As the lava solidified, water vapor and carbon dioxide trapped within the solidified flows formed a vesicular texture (literally millions of small bubbles). Later, groundwater transported ferric iron, quartz, and other dissolved minerals passed through the trapped gas vesicles. These quartz-rich groundwater solutions crystallized into concentric bands of fine-grained quartz called chalcedony, or embeded agates.
Over the next billion years, erosion exposed a number of the quartz-filled, banded vesicles -- agates -- were freed by running water and chemical disintegration of the lavas, since these vesicles were now harder than the lava rocks that contained them. The vast majority, however, remained lodged in the lava flows until the next major geologic event that changed them and Minnesota.
During the ensuing ice ages a lobe of glacial ice, the Superior lobe, moved into Minnesota through the agate-filled Superior trough. The glacier picked up surface agates and transported them south. Its crushing action and cycle of freezing and thawing at its base also freed many agates from within the lava flows and transported them, too. The advancing glacier acted like an enormous rock tumbler, abrading, fracturing, and rough-polishing the agates.
[edit] Description
The Lake Superior agate differs from other agates found around the world in its rich red, orange, and yellow coloring. This color scheme is caused by the oxidation of iron. Iron leached from rocks provided the pigment that gives the gemstone its beautiful array of color. The concentration of iron and the amount of oxidation determine the color within or between an agate's bands.
The gemstone comes in various sizes. The gas pockets in which the agates formed were primarily small, about 1 cm in diameter. A few Lake Superior agates have been found that are 22 cm in diameter with a mass exceeding 10 kilograms. Very large agates are extremely rare.
The most common type of Lake Superior agate is the fortification agate with its eye-catching banding patterns. Each band, when traced around an exposed pattern or "face," connects with itself like the walls of a fort, hence the name fortification agate.
A common subtype of the fortification agate is the parallel-banded, onyx-fortification or water-level agate. Perfectly straight, parallel bands occur over all or part of these stones. The straight bands were produced by puddles of quartz-rich solutions that crystallized inside the gas pocket under very low fluid pressure. The parallel nature of the bands also indicates the agate's position inside the lava flow.
Probably the most popular Lake Superior agate is also one of the rarest. The highly treasured eye agate has perfectly round bands or "eyes" dotting the surface of the stone.
Occasionally, collectors find a gemstone with an almost perfectly smooth natural surface. These rare agates are believed to have spent a long time tumbling back and forth in the waves along some long-vanished, wave-battered rocky beach. They are called, appropriately enough, "water-washed" agates.
[edit] Cutting and polishing
A gemstone can be used as a jewel when cut and polished. Only a fraction of the Lake Superior agate are of the quality needed for lapidary. Three lapidary techniques are used on Lake Superior agates:
- Tumbling—Small gemstones are rotated in drums with progressively finer polishing grit for several days until they are smooth and reflective.
- Saw-cut and polish—Stones up to 1/2 kg are cut with diamond saws into thin slabs, which then are cut into various shapes. One side of the shaped slab is polished producing fine jewelry pieces and collectible gems called cabochons.
- Face polishing—Polishing a curved surface on a portion of the stone and leaving the major portion in its natural state is called face polishing.
[edit] Distribution of Lake Superior agate
One of the most appealing reasons for naming the Lake Superior agate as the Minnesota state gemstone is its general availability. Glacial activity spread agates throughout northeastern and central Minnesota and extreme northwestern Wisconsin.
[edit] Finding the Minnesota State Gem
Typically the richly colored banding pattern is not well exposed and prospectors must look for other clues to the presence of agates.
The following characteristics are used to identify agates in the field.
- Band planes along which the agate has broken are sometimes visible, giving the rock a peeled texture. It appears as though the bands were partially peeled off like a banana skin.
- Iron-oxide staining is found on nearly all agates to some degree, and generally covers much of the rock. Such staining can be many different colors, but the most common are shades of rust-red and yellow.
- Translucence is an optical feature produced by chalcedony quartz, the principal constituent of agates. The quartz allows light to penetrate, producing a glow. Sunny days are best for observing translucence.
- A glossy, waxy appearance, especially on a chipped or broken surface, is another clue.
- A pitted texture often covers the rock surface. The pits are the result of knobs or projections from an initial layer of softer mineral matter deposited on the wall of the cavity in which the agate formed. Later, when the quartz that formed the agate was deposited in the cavity, these projections left impressions on the exterior.
