Interval (music)

From Wikipedia, the free encyclopedia

The neutrality of this article is disputed. Please see the discussion on the talk page.

In music theory, an interval is the relationship between two notes or pitches, the lower and higher members of the interval. It often refers to those two notes themselves (otherwise known as a dyad). Larger intervals are described as wide and smaller ones as narrow (for example, a sixth is wider than a third), but these are only relative terms.

Intervals may occur two ways:

• vertical (or harmonic) if the two notes sound simultaneously
• linear (or melodic), if the notes sound successively.

An interval class is an interval measured by the shortest distance possible between its two pitch classes.

Contents 1 Frequency ratios 2 Interval number and quality 2.1 Diatonic and chromatic intervals 2.2 Shorthand notation 2.3 Enharmonic intervals 2.4 Steps and skips 3 Pitch class intervals 3.1 Ordered and unordered pitch and pitch class intervals 4 Generic and specific intervals 5 Cents 6 Comparison of different interval naming systems 7 Consonant and dissonant intervals 8 Inversion 8.1 Interval roots 9 Interval cycles 10 Other intervals 11 Notes 12 Sources 13 External links 14 See also

[edit] Frequency ratios

In just intonation intervals are commonly labelled according to the ratio of frequencies of the two pitches. Important intervals are those using the lowest integers, such as 1/1, 2/1, 3/2, etc. This system is frequently used to describe intervals in non-Western music. This method is also often used in theoretical explanations of equal-tempered intervals used in European tonal music which explain their use through their approximation of just intervals.

[edit] Interval number and quality

In diatonic or tonal theory, intervals are labelled according to their diatonic function and according to the number of members or degrees they span in a diatonic scale.

The interval number of a note from a given tonic note is the number of staff positions enclosed within the interval, as shown at right. Intervals larger than an octave are called compound intervals; for example, a tenth is known as a compound third. Intervals larger than a thirteenth are rarely spoken of, since going above this by stacking thirds would result in a double octave (but see 8va for use of 15ma).

The name of any interval is further qualified using the terms perfect, major, minor, augmented, and diminished. This is called its interval quality.

• Unison, fourth, fifth, octave. These intervals may be perfect, augmented, or diminished.
  • A perfect fourth is five semitones.
  • A perfect fifth is seven semitones.
  • A perfect octave is twelve semitones.
  • A perfect unison occurs between notes of the same pitch, so it is zero semitones.
  • In each case, an augmented interval contains one more semitone, a diminished interval one fewer.
• Second, third, sixth, seventh. These intervals may be major, minor, augmented, or diminished.
  • Major seconds are two semitones, also called a whole step, minor seconds are one semitone, also called a half step.
  • Major thirds are four semitones, minor thirds are three semitones.
  • Major sixths are nine semitones, minor sixths are eight semitones.
  • Major sevenths are eleven semitones, minor sevenths are ten semitones.
  • In each case, the augmented interval contains one semitone more than the major interval, and the diminished interval one semitone fewer than the minor interval.

It is possible to have doubly-diminished and doubly-augmented intervals, but these are quite rare.

[edit] Diatonic and chromatic intervals

• In contemporary usage, for example in this present article, diatonic interval sometimes means "the distance spanned in a diatonic scale" by the notes in the interval (example: in any standard seven-note diatonic scale, from A (or Ab or A#) up to C (or Cb or C#) is the same diatonic interval). Similarly in this usage, the chromatic interval is the difference in semitones between two notes (example "the chromatic interval from F# up to A is three semitones [or half steps]").^{[citation needed]}

[edit] Shorthand notation

Intervals are often abbreviated with a P for perfect, m for minor, M for major, d for diminished, A for augmented, followed by the diatonic interval number. The indication M and P are often omitted. The octave is P8, and a unison is usually referred to simply as "a unison" but can be labeled P1. The tritone, an augmented fourth or diminished fifth is often π or TT. Examples:

• m2: minor second
• M3: major third
• P5: perfect fifth
• m9: minor ninth

For use in describing chords, the sign + is used for augmented and − for diminished. Furthermore the 3 for the third is often omitted, and for the seventh, the plain form stands for the minor interval, while the major is indicated by maj. So for example:

• m: minor third
• 7: minor seventh
• maj7: major seventh
• +5: augmented fifth
• −5: diminished fifth

[edit] Enharmonic intervals

Two intervals are considered to be enharmonic, or enharmonically equivalent, if they both contain the same pitches spelled in different ways; that is, if the notes in the two intervals are themselves enharmonically equivalent. Enharmonic intervals span the same number of semitones. For example, as show in the matrix nbelow, F#–A# (a major third), Gb–Bb (also a major third), F#–Bb (a diminished fourth), and Gb–A# (an augmented second) are all enharmonically equivalent – and they all span four semitones.

step	1	2	3	4
major third	F#		A#
major third		Gb		Bb
diminished fourth	F#			Bb
augmented second		Gb	A#

[edit] Steps and skips

Linear (melodic) intervals may be described as steps or skips in a diatonic context. Steps are linear intervals between consecutive scale degrees while skips are not, although if one of the notes is chromatically altered so that the resulting interval is three semitones or more (e.g. C to D sharp), that may also be considered a skip. However, the reverse is not true: a diminished third, an interval comprising two semitones, is still considered a skip.

The words conjunct and disjunct refer to melodies composed of steps and skips, respectively.

[edit] Pitch class intervals

Post-tonal or atonal theory, originally developed for equal tempered European classical music written using the twelve tone technique or serialism, integer notation is often used, most prominently in musical set theory. In this system intervals are named according to the number of half steps, from 0 to 11, the largest interval class being 6.

[edit] Ordered and unordered pitch and pitch class intervals

In atonal or musical set theory there are numerous types of intervals, the first being ordered pitch interval, the distance between two pitches upward or downward. For instance, the interval from C to G upward is 7, but the interval from G to C downward is −7. One can also measure the distance between two pitches without taking into account direction with the unordered pitch interval, somewhat similar to the interval of tonal theory.

The interval between pitch classes may be measured with ordered and unordered pitch class intervals. The ordered one, also called directed interval, may be considered the measure upwards, which, since we are dealing with pitch classes, depends on whichever pitch is chosen as 0. For unordered pitch class interval see interval class.

[edit] Generic and specific intervals

In diatonic set theory, specific and generic intervals are distinguished. Specific intervals are the interval class or number of semitones between scale degrees or collection members, and generic intervals are the number of scale steps between notes of a collection or scale.

[edit] Cents

The standard system for comparing intervals of different sizes is with cents. This is a logarithmic scale in which the octave is divided into 1200 equal parts. In equal temperament, each semitone is exactly 100 cents. The value in cents for the interval f₁ to f₂ is 1200×log₂(f₂/f₁).

[edit] Comparison of different interval naming systems

# semitones	Interval class	Generic interval	Common diatonic name	Comparable just interval	Comparison of interval width in cents
					equal temperament	just intonation	quarter-comma meantone
0	0	0	perfect unison	1:1	0	0	0
1	1	1	minor second	16:15	100	112	117
2	2	1	major second	9:8	200	204	193
3	3	2	minor third	6:5	300	316	310
4	4	2	major third	5:4	400	386	386
5	5	3	perfect fourth	4:3	500	498	503
6	6	3 4	augmented fourth diminished fifth	45:32 64:45	600	590 610	579 621
7	5	4	perfect fifth	3:2	700	702	697 wolf fifth 737
8	4	5	minor sixth	8:5	800	814	814
9	3	5	major sixth	5:3	900	884	889
10	2	6	minor seventh	16:9	1000	996	1007
11	1	6	major seventh	15:8	1100	1088	1083
12	0	0	perfect octave	2:1	1200	1200	1200

It is possible to construct just intervals which are closer to the equal-tempered equivalents, but most of the ones listed above have been used historically in equivalent contexts. In particular the tritone (augmented fourth or diminished fifth), could have other ratios; 17:12 (603 cents) is fairly common. The 7:4 interval (the harmonic seventh) has been a contentious issue throughout the history of music theory; it is 31 cents flatter than an equal-tempered minor seventh. Some assert the 7:4 is one of the blue notes used in jazz.

In the diatonic system, every interval has one or more enharmonic equivalents, such as augmented second for minor third.

[edit] Consonant and dissonant intervals

Consonance and dissonance are relative terms referring to the stability, or state of repose, of particular musical effects. Dissonant intervals would be those which cause tension and desire to be resolved to consonant intervals.

These terms are relative to the usage of different compositional styles.

• In atonal music all intervals (or interval classes) are considered equally consonant melodically and harmonically.
• In the middle ages, only the octave and perfect fifth were considered consonant harmonically.
• In 16th-century usage, perfect fifths and octaves, and major and minor thirds and sixths were considered harmonically consonant, and all other intervals dissonant. In the common practice period, it makes more sense to speak of consonant and dissonant chords, and certain intervals previously thought to be dissonant (such as minor sevenths) became acceptable in certain contexts. However, 16th-century practice continued to be taught to beginning musicians throughout this period.
• Hermann von Helmholtz (1821-1894) defined a harmonically consonant interval as one in which the two pitches have an overtone in common (specifically excluding the seventh harmonic). This essentially defines all seconds and sevenths as dissonant, and perfect fourths and fifth, and major and minor thirds and sixths, as consonant.
• Pythagoras defined a hierarchy of consonance based on how small the numbers were which express the ratio. 20th-century composer and theorist Paul Hindemith's system has a hierarchy with the same results as Pythagoras's, but defined by fiat rather than by interval ratios, to better accommodate equal temperament, all of whose intervals (except the octave) would be dissonant using acoustical methods.
• David Cope (1997, p.40-41) suggests the concept of interval strength, in which an interval's strength, consonance, or stability is determined by its approximation to a lower and stronger, or higher and weaker, position in the harmonic series. See also: Lipps-Meyer law.

All of the above analyses refer to vertical (simultaneous) intervals.

[edit] Inversion

An interval may be inverted, by raising the lower pitch an octave, or lowering the upper pitch an octave (though it is less usual to speak of inverting unisons or octaves). For example, the fourth between a lower C and a higher F may be inverted to make a fifth, with a lower F and a higher C. Here are the ways to identify interval inversions:

• For diatonically-named intervals, here are two rules, applying to all simple (i.e., non-compound) intervals:
  1. The number of any interval and the number of its inversion always add up to nine (four + five = nine, in the example just given).
  2. The inversion of a major interval is a minor interval (and vice versa); the inversion of a perfect interval is also perfect; the inversion of an augmented interval is a diminished interval (and vice versa); and the inversion of a double augmented interval is a double diminished interval (and vice versa).

A full example: E flat below and C natural above make a major sixth. By the two rules just given, C natural below and E flat above must make a minor third.

• For intervals identified by ratio, the inversion is determined by reversing the ratio and multiplying by 2. For example, the inversion of a 5:4 ratio is an 8:5 ratio.

• Intervals identified by integer can be simply subtracted from 12. However, since an interval class is the lower of the interval integer or its inversion, interval classes cannot be inverted.

[edit] Interval roots

Although intervals are usually designated in relation to their lower note, David Cope and Hindemith both suggest the concept of interval root. To determine an interval's root, one locates its nearest approximation in the harmonic series. The root of a perfect fourth, then, is its top note because it is an octave of the fundamental in the hypothetical harmonic series. The bottom note of every odd diatonically numbered intervals are the roots, as are the tops of all even numbered intervals. The root of a collection of intervals or a chord is thus determined by the interval root of its strongest interval.

As to its usefulness, Cope provides the example of the final tonic chord of some popular music being traditionally analyzable as a "submediant six-five chord" (added sixth chords by popular terminology), or a first inversion seventh chord (possibly the dominant of the mediant V/iii). According the interval root of the strongest interval of the chord (in first inversion, CEGA), the perfect fifth (C-G), is the bottom C, the tonic.

[edit] Interval cycles

Interval cycles, "unfold a single recurrent interval in a series that closes with a return to the initial pitch class", and are notated by George Perle using the letter "C", for cycle, with an interval class integer to distinguish the interval. Thus the diminished seventh chord would be C3 and the augmented triad would be C4. A superscript may be added to distinguish between transpositions, using 0-11 to indicate the lowest pitch class in the cycle. (Perle 1990, p.21)

[edit] Other intervals

There are also a number of intervals not found in the chromatic scale or labeled with a diatonic function which have names of their own. Many of these intervals describe small discrepancies between notes tuned according to the tuning systems used. Most of the following intervals may be described as microtones.

• A Pythagorean comma is the difference between twelve justly tuned perfect fifths and seven octaves. It is expressed by the frequency ratio 531441:524288, and is equal to 23.46 cents.
• A syntonic comma is the difference between four justly tuned perfect fifths and two octaves plus a major third. It is expressed by the ratio 81:80, and is equal to 21.51 cents.
• A Septimal comma is 64/63, and is the difference between the Pythagorean or 3-limit "7th" and the "harmonic 7th".
• Diesis is generally used to mean the difference between three justly tuned major thirds and one octave. It is expressed by the ratio 128:125, and is equal to 41.06 cents. However, it has been used to mean other small intervals: see diesis for details.
• A schisma (also skhisma) is the difference between five octaves and eight justly tuned fifths plus one justly tuned major third. It is expressed by the ratio 32805:32768, and is equal to 1.95 cents. It is also the difference between the Pythagorean and syntonic commas.
  • A schismic major third is a schisma different from a just major third, eight fifths down and five octaves up, F♭ in C.
• A quarter tone is half the width of a semitone, which is half the width of a whole tone.
• A kleisma is six major thirds up, five fifths down and one octave up, or, sometimes, the septimal kleisma 225:224.
• A limma is the ratio 256:243, which is the semitone in Pythagorean tuning.
• A ditone is the pythagorean ratio 81:64, two 9:8 tones.
• Additionally, some cultures around the world have their own names for intervals found in their music. See: sargam, Bali

See List of Musical Intervals for more.

See Musical interval mnemonics at Wikibooks for popular musical fragments that feature common intervals

[edit] Notes

[edit] Sources

• Cope, David (1997). Techniques of the Contemporary Composer, p.40-41. New York, New York: Schirmer Books. ISBN 0-02-864737-8.
• Perle, George (1990). The Listening Composer. California: University of California Press. ISBN 0-520-06991-9.

[edit] External links

• Interval conversion: Frequency ratio to cents and cents to frequency ratio
• Interval - Microtonal music theory
• Morphogenesis of chords and scales Chords and scales classification

Diatonic intervals	edit
Perfect : unison (0) | fourth (5) | fifth (7) | octave (12)
Major : second (2) | third (4) | sixth (9) | seventh (11)
Minor : second (1) | third (3)| sixth (8) | seventh (10)
Augmented : unison (1) | second (3) | third (5) | fourth (6) | fifth (8) | sixth (10) | seventh (12)
Diminished : second (0) | third (2) | fourth (4) | fifth (6) | sixth (7) | seventh (9) | octave (11)
semitones of equal temperament are given in brackets

[edit] See also

• Semitone