IBM 650

From Wikipedia, the free encyclopedia

The IBM 650 (photo) was one of IBM’s early computers, and the world’s first mass-produced (photo) computer. It was announced in 1953, and over 2000 systems were produced between the first shipment in 1954 and its final manufacture in 1962. Support for the 650 and its component units was withdrawn in 1969.

The 650 is a two-address, bi-quinary coded decimal machine (both data and addresses were decimal), with memory on a rotating drum. The 650 was specifically designed for users of existing IBM unit record equipment (electro-mechanical punched card-processing machines) upgrading from so-called Calculating Punches, like the IBM 604 model, to computers proper.

Contents 1 Hardware 2 Software 3 References 4 External links 5 Notes

[edit] Hardware

The basic 650 system consisted of three components:

• Console Unit (IBM 650)
• Power Unit (IBM 655)
• Card Reader/Punch Unit (IBM 533 or IBM 537)

Optional components:

• Disk Unit (IBM 355)
• Card Reader Unit (IBM 543)
• Card Punch Unit (IBM 544)
• Control Unit (IBM 652) Magnetic Tape Controller
• Auxiliary Unit (IBM 653) Core storage, index registers, floating point arithmetic
• Auxiliary Alphabetic Unit (IBM 654)
• Magnetic Tape Unit (IBM 727)
• Inquiry Station (IBM 838)
• Tape To Card Punch IBM 46 Model 3
• Tape To Card Punch IBM 47 Model 3
• Alphabetical Accounting Machine IBM 407

The rotating drum memory (photo) provided 2,000 signed 10-digit words of memory (5 character per word) at addresses 0000 to 1999. It was, by 21^st Century standards, quite slow because a word could not be accessed until its location on the drum surface passed under the read/write heads during rotation (rotating at 12,500 rpm, the non-optimized average access time was 2.5 ms). Because of this timing restriction, the second address in each instruction word was the address of the next instruction. Programs could be optimized by placing instructions around the drum based on the expected execution time of the previous instruction. One specialized instruction, 'Table lookup', could high-equal compare a reference 10 digit word with 46 consecutive following words on the drum in one 5ms revolution and then switch to the next track in time for the next 46 words (there were fifty words per track/revolution). This was a feat we (who??) could not match on our one-thousand times faster binary machine in 1963.

The optional Auxiliary Unit (IBM 653), was introduced on May 3, 1955, providing up to three features:

• 60 10-digit words of magnetic core memory at addresses 9000 to 9059; a small fast memory (this device gave a memory access time of 96µs, a 26-fold raw improvement relative to the rotating drum), needed for a tape and disk I/O buffer
• 3 4-digit index registers at addresses 8005 to 8007; drum addresses were indexed by adding 2000, 4000 or 6000 to them, core addresses were indexed by adding 0200, 0400 or 0600 to them. If the system had the 4000 word memory drum then indexing was by adding 4000 to the first address for index reg A, adding 4000 to the second address for index reg B, and by adding 4000 to each of the two addresses for index reg C. (the indexing for 4000 word systems only applied to the first address). The 4000 word systems required transistorized read/write circuitry for the drum memory and were available before 1963.
• Floating point – arithmetic instructions with 8 digit mantissa and 2 digit characteristic (offset exponent) – MMMMMMMMCC, providing a range of ±0.10000000E-50 to ±0.99999999E+49

The IBM 650 (pictured here) at the Haus zur Geschichte der IBM Datenverarbeitung (House for the History of IBM Data Processing), Sindelfingen, is still running (as of May 2004) and will process an income tax program of the time, with input and output on punched cards.

The IBM 7070, announced 1960, was designed to provide a "transistorized IBM 650" upgrade path.

See also:

• Knuth, Donald E. (January-March 1986). "The IBM 650: An Appreciation from the Field". IEEE Annals of the History of Computing 8 (1): 50-55.
• List of IBM products

[edit] Software

Software included:

• BLIS (Bell Laboratories Interpretive System)^[1], which used a numeric-only three-address approach
• IPL the first list processing language.
• SPACE (Simplified Programming Anyone Can Enjoy) which was a business-oriented two-step compiler (through SOAP)
• Perlis, A.J., et al. (4/18/58). Internal Translator; IT, A Compiler for the 650. 650 Library Program 2.1.001.
• IBM (1957). SOAP II for the IBM 650. C24-4000-0.
• IBM (1959). FOR TRANSIT Automatic Coding System for the IBM 650. 28-4028. A version of Fortran which compiled to IT which in turn was compiled to SOAP.
• IBM (1960). FORTRAN Automatic Coding System for the IBM 650. 29-4047.

[edit] References

• IBM (1955). IBM 650 magnetic drum data-processing machine manual of operation.. 22-6060.
• IBM (1955). IBM Presents the 650 Magnetic Drum Data Processing Machine. 32-6770.

[edit] External links

• IBM Archives: Workhorse of Modern Industry: The IBM 650 Includes a chronology, technical specifications, representative customers, and applications the 650 was used for.
• Weik, Martin H. (March 1961). A Third Survey of Domestic Electronic Digital Computing Systems. Ballistic Research Laboratories (BRL). Report No. 1115. Includes about 40 pages of IBM 650 survey detail: customers, applications, specifications, and costs.
• The IBM 650 at Columbia University
• An IBM 650 Simulator
• Sindelfingen Scroll down to House for the History of the IBM data processing where the working IBM 650 pictured above is located. See also History Galore at IBM Museum.
• IBM 650 documents at Bitsavers.org (PDF files)

[edit] Notes

1. ^ HOPL shows the name as BLISS; a definitive source has not been located