IBM 2741
From Wikipedia, the free encyclopedia
The 2741 was a low-speed dumb terminal introduced in 1965. It combined a Selectric typewriter mechanism with IBM SLT electronics. It operated at 14.8 character/s with a data rate of 134.5 bit/s. Seven-bit characters with odd-parity were used. There were 88 graphic characters and so shift characters were used to allow their encoding in six data bits. There were two different models with different encodings of the keyboard which were difficult to distinguish. The Correspondence model could accept typeballs from the ordinary office typewriter. The PTT/BCD model had a more limited choice of typeballs.
The protocol was simple and symmetric. A message began with a circle D control character and ended with a circle C. The message text was initially lower case. When the other end was sending, the local keyboard was locked. Protocol symmetry allowed two 2741s to communicate directly but this was a rare configuration.
It supplanted the earlier IBM 1050 which was more expensive and cumbersome.
The 2741 was important because it encouraged the development of remote terminal systems for the IBM System/360. APL\360 and ALGOL 68 are two early languages that took advantage of the typeball print head.
As a direct result the characters ∨, ∧, ¬, ≠, ≤, ≥, ×, ÷, ⌷, ↑, ↓, ⌊, ⌈ and ⊥ from the APL typeball print head found their way into the ALGOL 68 programming lanuage standard Final Report (August 1968).
The 2741 in turn was supplanted by 30 char/s ASCII terminals using the Xerox Diablo 630 print mechanism. The IBM 3767 which ran at 33.3 char/s was an alternate replacement.
