Hydrogen

From Wikipedia, the free encyclopedia

This article is about the chemistry of hydrogen. For the physics of atomic hydrogen, see hydrogen atom.

1 (none) ← hydrogen → helium - ↑ H ↓ Li Periodic Table - Extended Periodic Table
General
Name, Symbol, Number	hydrogen, H, 1
Chemical series	nonmetals
Group, Period, Block	1, 1, s
Appearance	colorless
Atomic mass	1.00794(7) g/mol
Electron configuration	1s1
Electrons per shell	1
Physical properties
Phase	gas
Density	(0 °C, 101.325 kPa) 0.08988 g/L
Melting point	14.01 K (−259.14 °C, −434.45 °F)
Boiling point	20.28 K (−252.87 °C, −423.17 °F)
Triple point	13.8033 K, 7.042 kPa
Critical point	32.97 K, 1.293 MPa
Heat of fusion	(H2) 0.117 kJ·mol−1
Heat of vaporization	(H2) 0.904 kJ·mol−1
Heat capacity	(25 °C) (H2) 28.836 J·mol−1·K−1
Vapor pressure P/Pa 1 10 100 1 k 10 k 100 k at T/K         15 20
Atomic properties
Crystal structure	hexagonal
Oxidation states	1, −1 (amphoteric oxide)
Electronegativity	2.20 (Pauling scale)
Ionization energies	1st: 1312.0 kJ/mol
Atomic radius	25 pm
Atomic radius (calc.)	53 pm (Bohr radius)
Covalent radius	37 pm
Van der Waals radius	120 pm
Miscellaneous
Thermal conductivity	(300 K) 180.5 mW·m−1·K−1
Speed of sound	(gas, 27 °C) 1310 m/s
CAS registry number	1333-74-0
Selected isotopes
Main article: Isotopes of hydrogen iso NA half-life DM DE (MeV) DP 1H 99.985% H is stable with 0 neutrons 2H 0.0115% H is stable with 1 neutron 3H trace 12.32 y β− 0.019 3He
References

Hydrogen (IPA: /ˈhaɪdrə(ʊ)dʒən/), is a chemical element that has the symbol H and an atomic number of 1. At standard temperature and pressure it is a colorless, odorless, nonmetallic, tasteless, highly flammable diatomic gas (H₂). With an atomic mass of 1.00794 g/mol, hydrogen is the lightest element.

Hydrogen is the most abundant of the chemical elements, constituting roughly 75% of the universe's elemental mass.^[1] Stars in the main sequence are mainly composed of hydrogen in its plasma state. Elemental hydrogen is relatively rare on Earth, and is industrially produced from hydrocarbons such as methane, after which most elemental hydrogen is used "captively" (meaning locally at the production site), with the largest markets about equally divided between fossil fuel upgrading (e.g., hydrocracking) and in ammonia production (mostly for the fertilizer market). Hydrogen may be produced from water using the process of electrolysis, but this process is presently significantly more expensive commercially than hydrogen production from natural gas.

The most common naturally occurring isotope of hydrogen is known as protium, has a single proton and no neutrons. In ionic compounds it can take on either a positive charge (becoming a cation composed of a bare proton) or a negative charge (becoming an anion known as a hydride). Hydrogen can form compounds with most elements and is present in water and most organic compounds. It plays a particularly important role in acid-base chemistry, in which many reactions involve the exchange of protons between soluble molecules. As the only neutral atom for which the Schrödinger equation can be solved analytically, study of the energetics and bonding of the hydrogen atom has played a key role in the development of quantum mechanics.

Contents 1 Nomenclature 2 History 2.1 Discovery of H2 2.2 Role in history of quantum theory 3 Natural occurrence 4 The hydrogen atom 4.1 Electron energy levels 4.2 Isotopes 5 Elemental molecular forms 6 Chemical and physical properties 6.1 Combustion 7 Compounds 7.1 Covalent and organic compounds 7.2 Hydrides 7.3 "Protons" and acids 8 Production 8.1 Laboratory syntheses 8.2 Industrial syntheses 8.3 Biological syntheses 9 Applications 9.1 Hydrogen as an energy carrier 10 See also 11 References 12 Further reading 13 External links

[edit] Nomenclature

Hydrogen, Latin: 'hydrogenium', is from Ancient Greek ὕδωρ (hudor): "water" and Ancient Greek γείνομαι (geinomai): "to beget or sire")^[2]

The word "hydrogen" has several different meanings;

1. the name of an element.
2. an atom, sometimes called "H dot", that is abundant in space but essentially absent on earth, because it dimerizes.
3. a diatomic molecule that occurs naturally in trace amounts in the Earth's atmosphere; chemists increasingly refer to H₂ as dihydrogen^[3] to distinguish this molecule from atomic hydrogen and hydrogen found in other compounds.
4. the atomic constituent within all organic compounds, water, and many other chemical compounds.

The elemental forms of hydrogen should not be confused with hydrogen as it appears in chemical compounds.

[edit] History

[edit] Discovery of H₂

Hydrogen gas, H₂, was first artificially produced and formally described by T. von Hohenheim (also known as Paracelsus, 1493–1541) via the mixing of metals with strong acids. He was unaware that the flammable gas produced by this chemical reaction was a new chemical element. In 1671, Robert Boyle rediscovered and described the reaction between iron filings and dilute acids, which results in the production of hydrogen gas.^[4] In 1766, Henry Cavendish was the first to recognize hydrogen gas as a discrete substance, by identifying the gas from a metal-acid reaction as "inflammable air", and further finding that the gas produces water when burned. Cavendish had stumbled on hydrogen when experimenting with acids and mercury. Although he wrongly assumed that hydrogen was a liberated component of the mercury rather than the acid, he was still able to accurately describe several key properties of hydrogen. He is usually given credit for its discovery as an element. In 1783, Antoine Lavoisier gave the element the name of hydrogen when he (with Laplace) reproduced Cavendish's finding that water is produced when hydrogen is burned. Lavoisier's name for the gas won out.

One of the first uses of H₂ was for balloons. The H₂ was obtained by reacting sulphuric acid and metallic iron. Infamously, H₂ was used in the Hindenburg airship that was destroyed in a midair fire.

[edit] Role in history of quantum theory

Because of its relatively simple atomic structure, consisting only of a proton and an electron, the hydrogen atom, together with the spectrum of light produced from it or absorbed by it, has been central to the development of the theory of atomic structure. Furthermore, the corresponding simplicity of the hydrogen molecule and the corresponding cation H₂⁺ allowed fuller understanding of the nature of the chemical bond, which followed shortly after the quantum mechanical treatment of the hydrogen atom had been developed in the mid-1920s.

One of the first quantum effects to be explicitly noticed (but not understood at the time) was Maxwell's observation, half a century before full quantum mechanical theory arrived. He observed that the specific heat capacity of H₂ unaccountably departs from that of a diatomic gas below room temperature and begins to increasingly resemble that of a monatomic gas at cryogenic temperatures. According to quantum theory, this behavior arises from the spacing of the (quantized) rotational energy levels, which are particularly wide-spaced in H₂ because of its low mass. These widely spaced levels inhibit equal partition of heat energy into rotational motion in hydrogen at low temperatures. Diatomic gases composed of heavier atoms do not have such widely spaced levels and do not exhibit the same effect.^[5]

[edit] Natural occurrence

Hydrogen is the most abundant element in the universe, making up 75% of normal matter by mass and over 90% by number of atoms.^[6] This element is found in great abundance in stars and gas giant planets. Molecular clouds of H₂ are associated with star formation. Hydrogen plays a vital role in powering stars through proton-proton reaction nuclear fusion.

Throughout the universe, hydrogen is mostly found in the atomic and plasma states whose properties are quite different from molecular hydrogen. As a plasma, hydrogen's electron and proton are not bound together, resulting in very high electrical conductivity and high emissivity (producing the light from the sun and other stars). The charged particles are highly influenced by magnetic and electric fields. For example, in the solar wind they interact with the Earth's magnetosphere giving rise to Birkeland currents and the aurora. Hydrogen is found in the neutral atomic state in the Interstellar medium. The large amount of neutral hydrogen found in the damped Lyman-alpha systems is thought to dominate the cosmological baryonic density of the Universe up to redshift z=4.^[7]

Under ordinary conditions on Earth, elemental hydrogen exists as the diatomic gas, H₂ (for data see table). However, hydrogen gas is very rare in the Earth's atmosphere (1 ppm by volume) because of its light weight, which enables it to escape from Earth's gravity more easily than heavier gases. Although H atoms and H₂ molecules are abundant in interstellar space, they are difficult to generate, concentrate, and purify on Earth. Still, hydrogen is the third most abundant element on Earth.^[8] Most of the Earth's hydrogen is in the form of chemical compounds such as hydrocarbons and water.^[9] Hydrogen gas is produced by some bacteria and algae and is a natural component of flatus. Methane is a hydrogen source of increasing importance.

[edit] The hydrogen atom

[edit] Electron energy levels

Main article: Hydrogen atom

The ground state energy level of the electron in a hydrogen atom is 13.6 eV, which is equivalent to an ultraviolet photon of roughly 92 nm.

The energy levels of hydrogen can be calculated fairly accurately using the Bohr model of the atom, which conceptualizes the electron as "orbiting" the proton in analogy to the Earth's orbit of the sun. However, the electromagnetic force attracts electrons and protons to one another, while planets and celestial objects are attracted to each other by gravity. Because of the discretization of angular momentum postulated in early quantum mechanics by Bohr, the electron in the Bohr model can only occupy certain allowed distances from the proton, and therefore only certain allowed energies. A more accurate description of the hydrogen atom comes from a purely quantum mechanical treatment that uses the Schrödinger equation or the equivalent Feynman path integral formulation to calculate the probability density of the electron around the proton. Treating the electron as a matter wave reproduces chemical results such as shape of the hydrogen atom more naturally than the particle-based Bohr model, although the energy and spectral results are the same. Modeling the system fully using the reduced mass of nucleus and electron (as one would do in the two-body problem in celestial mechanics) yields an even better formula for the hydrogen spectra, and also the correct spectral shifts for the isotopes deuterium and tritium. Very small adjustments in energy levels in the hydrogen atom, which correspond to actual spectral effects, may be determined by using a full quantum mechanical theory which corrects for the effects of special relativity (see Dirac equation), and by accounting for quantum effects arising from production of virtual particles in the vacuum and as a result of electric fields (see quantum electrodynamics).

In hydrogen gas, the electronic ground state energy level is split into hyperfine structure levels because of magnetic effects of the quantum mechanical spin of the electron and proton. The energy of the atom when the proton and electron spins are aligned is higher than when they are not aligned. The transition between these two states can occur through emission of a photon through a magnetic dipole transition. Radio telescopes can detect the radiation produced in this process, which is used to map the distribution of hydrogen in the galaxy.

[edit] Isotopes

Main article: Isotopes of hydrogen

Hydrogen has three naturally occurring isotopes, denoted ¹H, ²H, and ³H. Other, highly unstable nuclei (⁴H to ⁷H) have been synthesized in the laboratory but not observed in nature.^[10][11]

• ¹H is the most common hydrogen isotope with an abundance of more than 99.98%. Because the nucleus of this isotope consists of only a single proton, it is given the descriptive but rarely used formal name protium.

• ²H, the other stable hydrogen isotope, is known as deuterium and contains one proton and one neutron in its nucleus. Deuterium comprises 0.0026–0.0184% of all hydrogen on Earth. It is not radioactive, and does not represent a significant toxicity hazard. Water enriched in molecules that include deuterium instead of normal hydrogen is called heavy water. Deuterium and its compounds are used as a non-radioactive label in chemical experiments and in solvents for ¹H-NMR spectroscopy. Heavy water is used as a neutron moderator and coolant for nuclear reactors. Deuterium is also a potential fuel for commercial nuclear fusion.

• ³H is known as tritium and contains one proton and two neutrons in its nucleus. It is radioactive, decays through beta decay with a half-life of 12.32 years.^[9] Small amounts of tritium occur naturally because of the interaction of cosmic rays with atmospheric gases; tritium has also been released during nuclear weapons tests. It is used in nuclear fusion reactions, as a tracer in isotope geochemistry, and specialized in self-powered lighting devices. Tritium was once routinely used in chemical and biological labeling experiments as a radiolabel (this has become less common).

Hydrogen is the only element that has different names for its isotopes in common use today. (During the early study of radioactivity, various heavy radioactive isotopes were given names, but such names are no longer used). The symbols D and T (instead of ²H and ³H) are sometimes used for deuterium and tritium, but the corresponding symbol P is already in use for phosphorus and thus is not available for protium. IUPAC states that while this use is common it is not preferred.

[edit] Elemental molecular forms

There are two different types of diatomic hydrogen molecules that differ by the relative spin of their nuclei.^[12] In the orthohydrogen form, the spins of the two protons are parallel and form a triplet state; in the parahydrogen form the spins are antiparallel and form a singlet. At standard temperature and pressure, hydrogen gas contains about 25% of the para form and 75% of the ortho form, also known as the "normal form".^[13] The equilibrium ratio of orthohydrogen to parahydrogen depends on temperature, but since the ortho form is an excited state and has a higher energy than the para form, it is unstable and cannot be purified. At very low temperatures, the equilibrium state is composed almost exclusively of the para form. The physical properties of pure parahydrogen differ slightly from those of the normal form.^[14] The ortho/para distinction also occurs in other hydrogen-containing molecules or functional groups, such as water and methylene.

The uncatalyzed interconversion between para and ortho H₂ increases with increasing temperature; thus rapidly condensed H₂ contains large quantities of the high-energy ortho form that convert to the para form very slowly.^[15] The ortho/para ratio in condensed H₂ is an important consideration in the preparation and storage of liquid hydrogen: the conversion from ortho to para is exothermic and produces enough heat to evaporate the hydrogen liquid, leading to loss of the liquefied material. Catalysts for the ortho-para interconversion, such as iron compounds, are used during hydrogen cooling.^[16]

[edit] Chemical and physical properties

The solubility and adsorption characteristics of hydrogen with various metals are very important in metallurgy (as many metals can suffer hydrogen embrittlement) and in developing safe ways to store it for use as a fuel. Hydrogen is highly soluble in many compounds composed of rare earth metals and transition metals^[17] and can be dissolved in both crystalline and amorphous metals.^[18] Hydrogen solubility in metals is influenced by local distortions or impurities in the metal crystal lattice.^[19]

[edit] Combustion

Hydrogen gas is highly flammable and will burn at concentrations as low as 4% H₂ in air. The enthalpy of combustion for hydrogen is –286 kJ/mol; it combusts according to the following balanced equation.

2 H₂(g) + O₂(g) → 2 H₂O(l) + 572 kJ

When mixed with oxygen across a wide range of proportions, hydrogen explodes upon ignition. Hydrogen burns violently in air. Hydrogen-oxygen flames are nearly invisible to the naked eye, as illustrated by the faintness of flame from the main Space Shuttle engines (as opposed to the easily visible flames from the shuttle boosters). Thus it is difficult to visually detect if a hydrogen leak is burning. The Hindenburg zeppelin flames seen in the adjacent picture are from the covering skin of the zeppelin which contained carbon and pyrophoric aluminium powder that may have started the fire.^[20] Another characteristic of hydrogen fires is that the flames tend to ascend rapidly with the gas in air, causing less damage than hydrocarbon fires. Two-thirds of the Hindenburg passengers survived and deaths were from falling or from gasoline burns.^{[citation needed]}

H₂ reacts directly with other oxidizing elements. A violent and spontaneous reaction can occur at room temperature with chlorine and fluorine, forming the corresponding hydrogen halides, hydrogen chloride and hydrogen fluoride.

[edit] Compounds

Further information: Hydrogen compounds

[edit] Covalent and organic compounds

While H₂ is not very reactive under standard conditions, it does form compounds with most elements. Millions of hydrocarbons are known, but they are not formed by the direct reaction of elementary hydrogen and carbon. Hydrogen can form compounds with elements that are more electronegative, such as halogens (e.g., F, Cl, Br, I) and chalcogens (O, S, Se); in these compounds hydrogen takes on a partial positive charge. When bonded to fluorine, oxygen, or nitrogen, hydrogen can participate in a form of strong noncovalent bonding called hydrogen bonding, which is critical to the stability of many biological molecules. Hydrogen also forms compounds with less electronegative elements, such as the metals and metalloids, in which it takes on a partial negative charge. These compounds are often known as hydrides.

Hydrogen forms a vast array of compounds with carbon. Because of their general association with living things, these compounds came to be called organic compounds; the study of their properties is known as organic chemistry and their study in the context of living organisms is known as biochemistry. By some definitions, "organic" compounds are only required to contain carbon (as a classic historical example, urea). However, most of them also contain hydrogen, and since it is the carbon-hydrogen bond which gives this class of compounds most of its particular chemical characteristics, carbon-hydrogen bonds are required in some definitions of the word "organic" in chemistry. (This latter definition is not perfect, however, as in this definition urea would not be included as an organic compound).

In inorganic chemistry, hydrides can also serve as bridging ligands that link two metal centers in a coordination complex. This function is particularly common in group 13 elements, especially in boranes (boron hydrides) and aluminum complexes, as well as in clustered carboranes.^[9]

[edit] Hydrides

Compounds of hydrogen are often called hydrides, a term that is used fairly loosely. To chemists, the term "hydride" usually implies that the H atom has acquired a negative or anionic character, denoted H⁻. The existence of the hydride anion, suggested by G.N. Lewis in 1916 for group I and II salt-like hydrides, was demonstated by Moers in 1920 with the electrolysis of molten lithium hydride (LiH), that produced a stoichiometric quantity of hydrogen at the anode.^[21] For hydrides other than group I and II metals, the term is quite misleading, considering the low electronegativity of hydrogen. An exception in group II hydrides is BeH₂, which is polymeric. In lithium aluminum hydride, the AlH₄⁻ anion carries hydridic centers firmly attached to the Al(III). Although hydrides can be formed with almost all main-group elements, the number and combination of possible compounds varies widely; for example, there are over 100 binary borane hydrides known, but only one binary aluminum hydride.^[22] Binary indium hydride has not yet been identified, although larger complexes exist.^[23]

[edit] "Protons" and acids

Oxidation of H₂ formally gives the proton, H⁺. This species is central to discussion of acids, though the term proton is used loosely to refer to positively charged or cationic hydrogen, denoted H⁺. A bare proton H⁺ cannot exist in solution because of its strong tendency to attach itself to atoms or molecules with electrons. To avoid the convenient fiction of the naked "solvated proton" in solution, acidic aqueous solutions are sometimes considered to contain the hydronium ion (H₃O⁺) organized into clusters to form H₉O₄⁺.^[24] Other oxonium ions are found when water is in solution with other solvents.^[25]

Although exotic on earth, one of the most common ions in the universe is the H₃⁺ ion, known as protonated molecular hydrogen or the triatomic hydrogen cation.^[26]

[edit] Production

H₂ is produced in chemistry and biology laboratories, often as a by-product of other reactions; in industry for the hydrogenation of unsaturated substrates; and in nature as a means of expelling reducing equivalents in biochemical reactions.

[edit] Laboratory syntheses

In the laboratory, H₂ is usually prepared by the reaction of acids on metals such as zinc.

Zn + 2 H⁺ → Zn²⁺ + H₂

Aluminum produces H₂ upon treatment with acids but also with base:

2 Al + 6 H₂O → 2 Al(OH)₃ + 3 H₂

The electrolysis of water is a simple method of producing hydrogen, although the resulting hydrogen necessarily has less energy content than was required to produce it. A low voltage current is run through the water, and gaseous oxygen forms at the anode while gaseous hydrogen forms at the cathode. Typically the cathode is made from platinum or another inert metal when producing hydrogen for storage. If, however, the gas is to be burnt on site, oxygen is desirable to assist the combustion, and so both electrodes would be made from inert metals. (Iron, for instance, would oxidize, and thus decrease the amount of oxygen given off.) The theoretical maximum efficiency (electricity used vs. energetic value of hydrogen produced) is between 80–94%. Bellona Report on Hydrogen

2H₂O(aq) → 2H₂(g) + O₂(g)

[edit] Industrial syntheses

Hydrogen can be prepared in several different ways but the economically most important processes involve removal of hydrogen from hydrocarbons. Commercial bulk hydrogen is usually produced by the steam reforming of natural gas.^[27] At high temperatures (700–1100 °C; 1,300–2,000 °F), steam (water vapor) reacts with methane to yield carbon monoxide and H₂.

CH₄ + H₂O → CO + 3 H₂

This reaction is favored at low pressures but is nonetheless conducted at high pressures (20 atm; 600 inHg) since high pressure H₂ is the most marketable product. The product mixture is known as "synthesis gas" because it is often used directly for the production of methanol and related compounds. Hydrocarbons other than methane can be used to produce synthesis gas with varying product ratios. One of the many complications to this highly optimized technology is the formation of coke or carbon:

CH₄ → C + 2 H₂

Consequently, steam reforming typically employs an excess of H₂O.

Additional hydrogen from steam reforming can be recovered from the carbon monoxide through the water gas shift reaction, especially with an iron oxide catalyst. This reaction is also a common industrial source of carbon dioxide:^[27]

CO + H₂O → CO₂ + H₂

Other important methods for H₂ production include partial oxidation of hydrocarbons:

CH₄ + 0.5 O₂ → CO + 2 H₂

and the coal reaction, which can serve as a prelude to the shift reaction above:^[27]

C + H₂O → CO + H₂

NB. Hydrogen is sometimes produced and consumed in the same industrial process, without being separated. In the Haber process for the production of ammonia (the world's fifth most produced industrial compound), hydrogen is generated from natural gas.

[edit] Biological syntheses

H₂ is a product of some types of anaerobic metabolism and is produced by several microorganisms, usually via reactions catalyzed by iron- or nickel-containing enzymes called hydrogenases. These enzymes catalyze the reversible redox reaction between H₂ and its component two protons and two electrons. Evolution of hydrogen gas occurs in the transfer of reducing equivalents produced during pyruvate fermentation to water.^[28]

Water splitting, in which water is decomposed into its component protons, electrons, and oxygen, occurs in the light reactions in all photosynthetic organisms. Some such organisms — including the alga Chlamydomonas reinhardtii and cyanobacteria — have evolved a second step in the dark reactions in which protons and electrons are reduced to form H₂ gas by specialized hydrogenases in the chloroplast.^[29] Efforts have been undertaken to genetically modify cyanobacterial hydrogenases to efficiently synthesize H₂ gas even in the presence of oxygen.^[30]

Other rarer but mechanistically interesting routes to H₂ production also exist in nature. Nitrogenase produces approximately one equivalent of H₂ for each equivalent of N₂ reduced to ammonia. Some phosphatases reduce phosphite to H₂.

[edit] Applications

Large quantities of H₂ are needed in the petroleum and chemical industries. The largest application of H₂ is for the processing ("upgrading") of fossil fuels, and in the production of ammonia. The key consumers of H₂ in the petrochemical plant include hydrodealkylation, hydrodesulfurization, and hydrocracking.^[31] H₂ has several other important uses. H₂ is used as a hydrogenating agent, particularly in increasing the level of saturation of unsaturated fats and oils (found in items such as margarine), and in the production of methanol. It is similarly the source of hydrogen in the manufacture of hydrochloric acid. H₂ is also used as a reducing agent of metallic ores.

Apart from its use as a reactant, H₂ has wide applications in physics and engineering. It is used as a shielding gas in welding methods such as atomic hydrogen welding. H₂ is used as the rotor coolant in electrical generators at power stations, because it has the highest thermal conductivity of any gas. Liquid H₂ is used in cryogenic research, including superconductivity studies. Since H₂ is lighter than air, having a little more than 1/15th of the density of air, it was once widely used as a lifting agent in balloons and airships. However, this use was curtailed after the Hindenburg disaster convinced the public that the gas was too dangerous for this purpose.

Hydrogen's rarer isotopes also each have specific applications. Deuterium (hydrogen-2) is used in nuclear fission applications as a moderator to slow neutrons, and in nuclear fusion reactions. Deuterium compounds have applications in chemistry and biology in studies of reaction isotope effects. Tritium (hydrogen-3), produced in nuclear reactors, is used in the production of hydrogen bombs, as an isotopic label in the biosciences, and as a radiation source in luminous paints.

The triple point temperature of equilibrium hydrogen is a defining fixed point on the ITS-90 temperature scale.

[edit] Hydrogen as an energy carrier

Main article: Hydrogen economy

Having been used as an ingredient in some rocket fuels for several decades, hydrogen, or more specifically H₂, is now widely discussed in the context of energy. Hydrogen is not an energy source, since it is not an abundant natural resource and more energy is used to produce it than can be ultimately extracted from it. However, it could become useful as a carrier of energy, as elucidated in the United States Department of Energy's 2003 report, "Among the various alternative energy strategies, building an energy infrastructure that uses hydrogen — the third most abundant element on the earth's surface — as the primary carrier that connects a host of energy sources to diverse end uses may enable a secure and clean energy future for the Nation."^[32] The hydrogen would then locally be converted into usable energy either via combustion of fossil fuels or by electrochemical conversion into electricity in a fuel cell.

One theoretical advantage of using H₂ as a carrier is the localization and concentration of environmentally unwelcome aspects of hydrogen manufacture. For example, CO₂ sequestration could be conducted at the point of H₂ production from methane. Hydrogen could also be produced using the electrolysis of water method; however, this is currently three to six times as expensive as production from natural gas. High-temperature electrolysis, which promises greater efficiency, is being investigated. Currently, however hydrogen production is expensive relative to other energy storage chemicals, and the bulk of hydrogen is now produced by the least expensive method, which (as noted) employs methane and which, as currently practiced, creates greenhouse gas emissions. ^[33]

[edit] See also

[edit] References

[edit] Further reading

• (1989). "Chart of the Nuclides". Fourteenth Edition. General Electric Company.
• Ferreira-Aparicio, P, M. J. Benito, J. L. Sanz (2005). "New Trends in Reforming Technologies: from Hydrogen Industrial Plants to Multifuel Microreformers". Catalysis Reviews 47: 491-588.
• Krebs, Robert E. (1998). The History and Use of Our Earth's Chemical Elements : A Reference Guide. Westport, Conn.: Greenwood Press. ISBN 0-313-30123-9.
• Newton, David E. (1994). The Chemical Elements. New York, NY: Franklin Watts. ISBN 0-531-12501-7.
• Rigden, John S. (2002). Hydrogen : The Essential Element. Cambridge, MA: Harvard University Press. ISBN 0-531-12501-7.
• Romm, Joseph, J. (2004). The Hype about Hydrogen, Fact and Fiction in the Race to Save the Climate. Island Press. ISBN 1-55963-703-X. Author interview at Global Public Media.
• Stwertka, Albert (2002). A Guide to the Elements. New York, NY: Oxford University Press. ISBN 0-19-515027-9.

[edit] External links

Wikimedia Commons has media related to: Hydrogen

• The Truth About Hydrogen; Popular Mechanics
• Basic Hydrogen Calculations of Quantum Mechanics
• Biohydrogen
• National Hydrogen Association
• Computational Chemistry Wiki
• Hydrogen phase diagram
• RIKEN Beam Science Laboratory, Japan — Heavy hydrogen research
• Wavefunction of hydrogen
• Questions and answers on Hydrogen and Hydrogen Fuel Cells

• Links to external chemical sources.

v • d • e E numbers
Colours (E100-199) • Preservatives (E200-299) • Antioxidants & Acidity regulators (E300-399) • Thickeners, stabilisers & emulsifiers (E400-499) • pH regulators & anti-caking agents (E500-599) • Flavour enhancers (E600-699) • Miscellaneous (E900-999) • Additional chemicals (E1100-1599)
Waxes (E900-909) • Synthetic glazes (E910-919) • Improving agents (E920-929) • Packaging gases (E930-949) • Sweeteners (E950-969) • Foaming agents (E990-999)
Argon (E938) • Helium (E939) • Dichlorodifluoromethane (E940) • Nitrogen (E941) • Nitrous oxide (E942) • Butane (E943a) • Isobutane (E943b) • Propane (E944) • Oxygen (E948) • Hydrogen (E949)