Hubcap
From Wikipedia, the free encyclopedia
- For other uses, see Hubcap (disambiguation).
A hubcap, wheel cover or wheel trim is a decorative disk on an automobile wheel that covers at least a central portion of the wheel. Cars with stamped steel wheels often use a full wheel cover that conceals the entire wheel. Cars with alloy wheels or styled steel wheels generally use smaller hubcaps, sometimes called center caps.
In the UK, a wheel cover is a 4x4 accessory covering the rear mounted spare wheel on 4x4 vehicles, these are often printed with a dealer's name or something more fun, such as the infamous two rhinos on the Suzuki Jeeps in the late 1980's made famous by Fred Cutler Manufacturing.
Early hubcaps were very small, sometimes merely covering the grease bearing of the wheel. These snap onto bulges on the wheel, and to change the wheel they are pried off with a tool resembling a very large slotted-tip screwdriver. This differs from the spinners that serve the same purpose for racing cars and those cars with wire wheels, which were designed to be quickly unthreaded by hand. Most hubcaps were once made of chrome-plated steel or stainless steel.
The rest of the wheel was originally of wood or many fitted metal parts. When pressed steel wheels became common by the 1940s, these were often painted the same color as the car body. It was these steel wheels that had the lug nuts that the hubcap expanded in size to cover. The next development was, as an option on more expensive cars, a chrome-plated trim ring that clipped onto the outer rim of the wheel, right at the tire. Finally came the full wheel cover, which of course covered the entire wheel. By this time, specialty wheels of magnesium or aluminium alloy had come on the market, and wheel covers were a cheap means of imitating the styling of those. Plastic wheel covers (known in the UK as wheel trims) appeared in the 1970s and became mainstream in the 1980s. Plastic has largely replaced steel as the primary material for manufacturing hubcaps/trims, and where steel wheels are still used, they are now generally painted black so the wheel is less visible through cutouts in the wheel trim. It is possible to make pressed steel wheels more attractive and "alloy-like", as is done on some budget Honda models, but most manufacturers persist with very plain-looking wheels and add the plastic trim.
Often a hubcap will bear the trademark or symbol of the maker of the automobile or the maker of the hubcap. Early hubcaps were often chrome plated, and many had decorative, non-functional spokes. Hubcaps were immortalized in the Art Deco styling of the spire of the Chrysler Building in midtown Manhattan.
Part of the lore of hubcaps is that on bad roads they have a tendency of falling off due to hitting a bump. In the southwest of the U.S., and in Mexico, there were lots of automotive garages whose walls were decorated with all sorts of hubcaps that had fallen off in the vicinity; they were often for sale. This problem persists today in spite of the many different retention systems that have been engineered. Hubcaps generally use either clip-on retention, where some type of spring clip engages a groove in the wheel, or bolt-on retention, where a threaded fastener retains the hubcap. Clip-on hubcaps tend to pop off suddenly when the wheel impacts a pothole or curbstone, while bolt-on hubcaps are more likely to vibrate loose over time, and tend to rattle and squeak. To prevent loss, many owners attach plastic wheel trims to the wheel itself using an electrical zip tie, which are sold in a silver colour for this very purpose. Enterprising manufacturers also sell a small kit consisting of spare zip ties, a pair of cutting pliers and latex gloves to allow a trim thus secured to be removed easily in the event of a puncture.
In the U.S., during the age of custom cars (1950s-early 1960s), decorating one car with the wheel covers from another was common. Two very desirable wheel covers were those of the 1950 Cadillac (called the "Sombrero") and that of the 1953 Oldsmobile, which resembed a huge, three-tined spinner. In a sort of homage to the former, Moon-brand hubcaps and wheel covers were some of the first independently offered for hot rods and custom cars.
[edit] External links
In the early 1980's manufacturers began to manufacture hubcaps out of plastic instead of metal. The danger of a 3-10lbs hubcap flying off at high speeds created a danger to pedestrians
