Engineer's scale
From Wikipedia, the free encyclopedia
An engineer's scale is a ruler, a tool for measuring distances. It is commonly made of plastic and is just over 300 mm (twelve inches) long, so that the measuring ticks at the edges do not become unusable by wear. It is used in making engineering drawings, commonly called blueprints, in scale. For example, "one-tenth size" would appear on a drawing to indicate a part larger than the paper itself. It is not to be used to measure the machined parts to see if these meet the specifications.
In the US, this scale is divided into decimalized fractions of an inch, but has a cross-section like an equilateral triangle, which enables the scale to have six edges indexed for measurement. One edge is divided into tenths of an inch, and the subsequent ones are directly marked for twentieths, thirtieths, fortieths, fiftieths, and finally sixtieths of an inch.
On a metric engineer's scale, common scales are 1:100, 1:200, 1:250, 1:300, 1:400, and 1:500.
The engineer's scale came into existence when machining parts required a greater precision than the usual, binary fractionalization of the inch as in the architect's scale for houses and furniture. They were used, for example, in laying out printed circuit boards with the spacing of leads from integrated circuit chips as one-tenth of an inch. In the twenty-first century, those which are commonly purchased in the US are actually made in Germany.
