Energy conservation
From Wikipedia, the free encyclopedia
- For the physical concepts, see conservation of energy and energy efficiency.
Energy conservation is the practice of decreasing the quantity of energy used while achieving a similar outcome of end use. This practice may result in increase of national security, personal security, financial capital, human comfort and environmental value. Individuals and organizations that are direct consumers of energy may want to conserve energy in order to reduce energy costs and promote environmental values. Industrial and commercial users may want to increase efficiency and maximize profit.
On a larger scale, energy conservation is an element of energy policy. The need to increase the available supply of energy (for example, through the creation of new power plants, or by the importation of more energy) is lessened if societal demand for energy can be reduced, or if growth in demand can be slowed. This makes energy conservation an important part of the debate over climate change and the replacement of non-renewable resources with renewable energy. Encouraging energy conservation among consumers is often advocated as a cheaper or more environmentally sensitive alternative to increased energy production.
Contents |
[edit] Energy Efficiency trends in the United States
The U.S. is by far the biggest consumer of energy in the world. The U.S. Department of Energy categorizes national energy use in four broad sectors: transportation, residential, commercial, and industrial. [1]
Energy usage in the transportation and residential sectors (about half of U.S. energy consumption) is largely controlled by individual consumers. Commercial and industrial energy expenditures are determined by businesses, government entities and other facility managers. National energy policy has a significant effect on energy usage across all four sectors.
[edit] Transportation sector
The transportation sector includes all vehicles used for personal or freight transportation. Of the energy used in this sector, approximately 65% is consumed by gasoline-powered vehicles, primarily personally owned. Diesel-powered transport (trains, merchant ships, heavy trucks, etc.) consumes about 20%, and air traffic consumes most of the remaining 15%. [2]
The oil supply crises of the 1970s spurred the creation, in 1975, of the federal Corporate Average Fuel Economy (CAFE) program, which required auto manufacturers to meet progressively higher fleet fuel economy targets. The next decade saw dramatic improvements in fuel economy, mostly the result of reductions in vehicle size and weight. These gains eroded somewhat after 1990 due to the growing popularity of sport utility vehicles, pickup trucks and minivans, which fall under the more lenient "light truck" CAFE standard.
In addition to the CAFE program, the U.S. government has tried to encourage better vehicle efficiency through tax policy. Since 2002, taxpayers have been eligible for income tax credits for gas/electric hybrid vehicles. A "gas-guzzler" tax has been assessed on manufacturers since 1978 for cars with exceptionally poor fuel economy. While this tax remains in effect, it currently generates very little revenue as overall fuel economy has improved.
Another focus in gasoline conservation is reducing the number of miles driven. An estimated 40% of American automobile use is associated with daily commuting. Many urban areas offer subsidized public transportation to reduce commuting traffic, and encourage carpooling by providing designated high-occupancy vehicle lanes and lower tolls for cars with multiple riders.
In recent years telecommuting has also become a viable alternative to commuting for some jobs, but as of 2003 only 3.5% of workers were telecommuters. Ironically, hundreds of thousands of U.S. and European workers have been replaced by workers in India who telecommute from thousands of miles away.
A vehicle's gas mileage normally decreases rapidly at speeds above 55 miles per hour. A car or truck moving at 55 miles an hour can get about 15 percent better fuel economy than the same car going 65 mph. According to the U.S. Department of Energy (DOE), as a rule of thumb, each 5 mph you drive over 60 mph is similar to paying an additional $0.21 per gallon for gas (at $3.00 per gallon). [3]
[edit] Residential sector
The residential sector refers to all private residences, including single-family homes, apartments, manufactured homes and dormitories. Energy use in this sector varies significantly across the country, due to regional climate differences and different regulation. On average, about half of the energy used in the U.S. homes is expended on space conditioning (i.e. heating and cooling).
The efficiency of furnaces and air conditioners has increased steadily since the energy crises of the 1970s. The 1987 National Appliance Energy Conservation Act authorized the Department of Energy to set minimum efficiency standards for space conditioning equipment and other appliances each year, based on what is "technologically feasible and economically justified". Beyond these minimum standards, the Environmental Protection Agency awards the Energy Star designation to appliances that exceed industry efficiency averages by an EPA-specified percentage.
Despite technological improvements, many American lifestyle changes have put higher demands on heating and cooling resources. The average size of homes built in the United States has increased significantly, from 1500 ft² in 1970 to 2300 ft² in 2005. The single-person household has become more common, as has central air conditioning: 23% of households had central air conditioning in 1978, that figure rose to 55% by 2001.
As a cheaper alternative to the purchase of a new furnace or air conditioner, most public utilities encourage smaller changes the consumer can make to lessen space conditioning usage. Weatherization is frequently subsidized by utilities or state/federal tax credits, as are programmable thermostats. Consumers have also been urged to adopt a wider indoor temperature range (e.g. 65 °F in winter, 80 °F in summer).
[edit] Home energy consumption averages[4]:
- space conditioning, 44%
- water heating, 13%
- lighting, 12%
- refrigeration, 8%
- home electronics, 6%
- laundry appliances, 5%
- kitchen appliances, 4%
- other uses, 8%
Energy usage in some homes may vary widely from these averages. For example, milder regions such as the southern U.S. and Pacific coast of the USA need far less energy for space conditioning than New York City or Chicago. In milder climates, lighting energy may easily consume up to 40% of total energy. Certain appliances such as a waterbed, hot tub, or pre-1990 refrigerator use significant amounts of electricity. In most residences no single appliance dominates, and any conservation efforts must be directed to numerous areas in order to achieve substantial energy savings. However, Ground Source Heat Pump systems are the more energy efficient, environmentally clean, and cost-effective space conditioning systems available (Environmental Protection Agency), and can achieve reductions in energy consumptions of up to 70%.
[edit] Best building practices
Current best practices in building design and construction result in homes that are profoundly more energy conserving than average new homes. See Passive house, Superinsulation, Self-sufficient homes, Earthship, Straw-bale construction, MIT Design Advisor, Energy Conservation Code for Indian Commercial Buildings.
[edit] Commercial sector
The commercial sector consists of retail stores, offices (business and government), restaurants, schools and other workplaces. Energy in this sector has the same basic end uses as the residential sector, in slightly different proportions. Space conditioning is again the single biggest consumption area, but it represents only about 30% of the energy use of commercial buildings. Lighting, at 25%, plays a much larger role than it does in the residential sector. [5] Lighting is also generally the most wasteful component of commercial use. A number of case studies indicate that more efficient lighting and elimination of over-illumination can reduce lighting energy by approximately fifty percent in many commercial buildings.
Commercial buildings can greatly increase energy efficiency by thoughtful design, with today's building stock being very poor examples of the potential of systematic (not expensive) energy efficient design (Steffy, 1997). Commercial buildings often have professional management, allowing centralized control and coordination of energy conservation efforts. As a result, fluorescent lighting (about four times as efficient as incandescent) is the standard for most commercial space, although it may produce certain adverse health effects[6][7][8][9]. Potential health concerns can be mitigated by using newer fixtures with electronic ballasts rather than older magenetic ballasts.[1] As most buildings have consistent hours of operation, programmed thermostats and lighting controls are common. However, too many companies believe that merely having a computer controlled Building automation system guarantees energy efficiency. As an example one large company in Northern California boasted that it was confident its state of the art system had optimized space heating. A more careful analysis by Lumina Technologies showed the system had been given programming instructions to maintain constant 24 hour temperatures in the entire building complex. This instruction caused the injection of nighttime heat into vacant buildings when the daytime summer temperatures would often exceed 90 degrees Fahrenheit. This mis-programming was costing the company over $130,000 per year in wasted energy(Lumina Technologies, 1997). In addition to the effective programming of building control systems smart Energy Saving Modules can be utilized. ESM systems can be added to existing HVAC and refrigeration system controls at little cost. They can yield reductions in energy consuption of over 15%, thereby saving money and reducing greenhouse gas emissions. Many corporations and governments also require the Energy Star rating for any new equipment purchased for their buildings.
Solar heat loading through standard window designs usually leads to high demand for air conditioning in summer months. An example of building design overcoming this excessive heat loading is the Dakin Building in Brisbane, California, where fenestration was designed to achieve an angle with respect to sun incidence to allow maximum reflection of solar heat; this design also assisted in reducing interior over-illumination to enhance worker efficiency and comfort.
[edit] Industrial sector
The industrial sector represents all production and processing of goods, including manufacturing, construction, farming, water management and mining. Increasing costs have forced energy-intensive industries to make substantial efficiency improvements in the past 30 years. For example, the energy used to produce steel and paper products has been cut 40% in that time frame, while petroleum/aluminum refining and cement production have reduced their usage by about 25%. These reductions are largely the result of recycling waste material and the use of cogeneration equipment for electricity and heating.
The energy required for delivery and treatment of fresh water often constitutes a significant percentage of a region's electricity and natural gas usage (an estimated 20% of California's total energy use is water-related[10].) In light of this, some local governments have worked toward a more integrated approach to energy and water conservation efforts.
Unlike the other sectors, total energy use in the industrial sector has declined in the last decade. While this is partly due to conservation efforts, it's also a reflection of the growing trend for U.S. companies to move manufacturing operations offshore.
[edit] Energy conservation in the United Kingdom
- main article: Energy use and conservation in the United Kingdom
Energy conservation in the United Kingdom has been receiving increased attention over recent years. Key factors behind this are the Government's commitment to reducing carbon emissions, the projected 'energy gap' in UK electricity generation, and the increasing reliance on imports to meet national energy needs. Domestic housing and road transport are currently the two biggest problem areas.
[edit] Issues with energy conservation
Critics of some forms of energy conservation make the following arguments:
- It is difficult for home owners or small business to justify investment in energy saving measures. Wind turbines and Solar panels may yield 'free' energy to the user however the initial investment is high, and longer term maintenance costs may further inrease the time required for any payback. Condensing boilers are very much more efficient than older types. Energy savings are achieved by venting less heat externally and heating water for showers etc, as it is used. Refrigeration is also a major factor of energy consumption, electronic Energy saving modules (ESM) can be added to existing HVAC and refrigeration systems at little cost to conserve electricity.
- For transportation the same finacial payback versus energy savings arguement can be made. For example, a new hybrid vehicle may have a better miles per gallon rating than a current vehicle, but may have higher initial price due to the greater costs of manufacturing the vehicle. The hybrid car may give 45 mpg, saving the average driver 278 gallons per year. The hybrid engine cost $3000 extra, so with gasoline at $2.50 per gallon, it pays for itself in 4.3 years, and saves over 1000 gallons of gasoline from being used. The resale value of a fuel-efficient vehicle may be higher than a conventional gas-powered vehicle.
- Some critics suggest that it is inefficient to reduce lighting intensity levels in the workplace, and retailers argue that bright lighting stimulates purchasing. Health studies have demonstrated that headache, stress (medicine), blood pressure, fatigue and worker error all generally increase with the common over-illumination present in many workplace and retail settings (Davis, 2001), (Bain, 1997). It has been shown that natural daylighting increases productivity levels of workers, while reducing energy consumption. [citation needed] Consumers are also motivated by a number of factors, and corporate stewardship may provide an incentive for shoppers to visit stores who conserve energy. Lower overhead costs may allow retailers to lower prices, stimulating consumption.
[edit] Jevons paradox
The Jevons paradox is an observation made by William Stanley Jevons who stated that as technological improvements increase the efficiency with which a resource is used, total consumption of that resource may increase, rather than decrease. It may also be that some conservation efforts have the same effect. For example, if 10% of a country's population reduces its use of gasoline, the price of gasoline may drop, and the remaining 90% of the population may use more gasoline as a result. This hypothesis has not been sufficiently studied. Compare Parkinson's law.
[edit] See also
- Annual fuel utilization efficiency (AFUE)
- Energy crisis
- Energy efficiency
- Energy efficiency in British housing
- Energy Saving Module
- Energy use in the United States
- Fuel economy
- Fuel efficiency
- Lighting
- Light pollution
- Oil phase-out in Sweden
- Oil price increases of 2004-2006
- Over-illumination
- Thermal efficiency
- Timeline of environmental events
- MIT Design Advisor
- Category:Low-energy building
- Energy Conservation Building Code for Indian Commercial Buildings
- Energie-Cités
[edit] References
- ^ US Dept. of Energy, "Annual Energy Report" (July 2006), Energy Flow diagram
- ^ US Dept. of Energy, "Annual Energy Outlook" (February 2006), Table A2
- ^ http://www.consumerenergycenter.org/transportation/consumer_tips/speeding_and_mpg.html
- ^ US Dept. of Energy, "Buildings Energy Data Book" (August 2005), sec. 1.2.3
- ^ US Dept. of Energy, "Buildings Energy Data Book" (August 2005), sec. 1.3.3
- ^ Susan L. Burks, Managing your Migraine, Humana Press, New Jersey (1994) ISBN 0-89603-277-9
- ^ Cambridge Handbook of Psychology, Health and Medicine, edited by Andrew Baum, Robert West, John Weinman, Stanton Newman, Chris McManus, Cambridge University Press (1997) ISBN 0-521-43686-9
- ^ L. Pijnenburg, M. Camps and G. Jongmans-Liedekerken, Looking closer at assimilation lighting, Venlo, GGD, Noord-Limburg (1991)
- ^ Igor Knez, Effects of colour of light on nonvisual psychological processes, Journal of Environmental Psychology, Volume 21, Issue 2, June 2001, Pages 201-208
- ^ California Energy Commission, "California's Water-Energy Relationship" (November 2005), p.8
- Scott Davis, Dana K. Mirick, Richard G. Stevens (2001). "Night Shift Work, Light at Night, and Risk of Breast Cancer". Journal of the National Cancer Institute 93 (20): 1557-1562.
- Bain, A., “The Hindenburg Disaster: A Compelling Theory of Probable Cause and Effect,” Procs. NatL Hydr. Assn. 8th Ann. Hydrogen Meeting, Alexandria, Va., March 11-13, pp 125-128 (1997}
- Gary Steffy, Architectural Lighting Design, John Wiley and Sons (2001) ISBN 0-471-38638-3
- Lumina Technologies, Analysis of energy consumption in a San Francisco Bay Area research office complex, for (confidential) owner, Santa Rosa, Ca. May 17, 1996
[edit] External links
Conservation education:
- MIT Design Advisor
- Kilowatt Ours - a film about energy conservation and renewable energy
- Conservation within Capitalism
- The Home Energy Saver
- Energy Star
- Choosing Energy Efficient Products
- The Energy Saving Trust
- Choosing Energy Efficient Windows
- Energy conservation tips for apartments
- Energy Efficiency: First Things First
- Energy Saving Resources for the Home
- Dividing heating bill by ten to build for tomorrow(translated from french)
U.S. energy statistics:
- U.S. Energy Information Administration
- Buildings Energy Data - commercial/residential building consumption patterns
International collaborative research:
UNEP- Energy Branch:
| Energy and Conservation Edit | |
|---|---|
| Energy conservation | Energy-efficient landscaping | Passive house | Passive solar building design | Superinsulation | Simple living | Ecological footprint | Ecovillage | Waste | Zero energy building | |
 |
|
|||
