Condensation in aerosol dynamics

From Wikipedia, the free encyclopedia

Condensation can be summarized as a phase transition from a gas to a liquid as vapor condenses on a pre-existing surface, the exact opposite of the transition from liquid to vapor which occurs in evaporation. Both condensation and evaporation are happenning all the time, atmospheric conditions determine which of them dominates. When the vapor is condensing, the particles on which the vapor condenses will grow bigger, in the same way when vapor evaporates from a particle, it will shrink. This can be seen in the size distribution of aerosol. When the vapor is condensing, then the size distribution moves to bigger sizes, on the contrary, when the vapor is evaporating it moves towards smaller sizes. As the size distribution grows towards bigger or smaller sizes, the airborne mass concentration increases or decreases respectively. In the atmosphere, condensation by for example H₂SO₄ and organic compounds is the main growth mechanism.

The conditions such as vapor pressure and temperature around the particle determine the dominant process (condensation or evaporation). Following the Kelvin effect (based on the curvature of liquid droplets) smaller particles need a higher ambient relative humidity to maintain equilibrium than bigger ones would. Relative humidity (%) for equilibrium can be determined from the following formula:

where p_s is the saturation vapor pressure above a particle at equilibrium (around a curved liquid droplet), p₀ is the saturation vapor pressure (flat surface of the same liquid) and S is the saturation ratio.

Kelvin equation for saturation vapor pressure above a curved surface is:

where p₀ is saturation vapor pressure above a flat surface, r_p droplet radius, σ surface tension of droplet, ρ density of liquid, M molar mass, T temperature, and R molar gas constant.

There are three regimes in the aerosol range. The first regime is called the free molecular regime, it contains aerosols with d_p < 10 nm or Kn >> 1. Free molecular regime is characterized by very small particles that has a similar mean free path than the surrounding gas and there is a lot of space to travel before colliding to another particle. The mass flux equation in the free molecular regime is:

where a is the particle radius, P are the pressures for from the droplet and at the surface of the droplet respectively, k_b is the Boltzmann constant, T is the temperature, C_A is mean thermal velocity and α is mass accommodation coefficient. It is assumed in the derivation of this equation that the pressure and the diffusion coefficient are constant.

The continuum regime is for bigger particles with d_p > 200 nm or Kn << 1. In this regime, the particles are big enough to "see" their environment as a continuum. The molecular flux in this regime is:

where a is the radius of the particle A, M_A is the molecular mass of the particle A, D_AB is the diffusion coefficient between particles A and B, R is the ideal gas constant, T is the temperature in kelvins and P are the pressures at infinite and at the surface respectively.

The transition regime contains all the particles in between the two preceding regime (10 nm < d_p < 200 nm) or Kn ≈ 1. The transition regime is situated in between the free molecular and the continuum regime. The semi-empirical equation describing mass flux is:

where I_cont is the mass flux in the continuum regime and Kn is the Knudsen number. This formula is called the Fuchs-Sutugin interpolation formula.

These equations don’t take into account the heat release effect.

[edit] See also

• Deposition (Aerosol physics)

[edit] References

Pruppacher, H. R., J. D. Klett. Microphysics of Clouds and Precipitation, Second Edition, Springer, 976. ISBN 079234409X.

Seinfeld, John, Spyros Pandis (2006). Atmospheric Chemistry and Physics: From Air Pollution to Climate Change, Second Edition, Hoboken, New Jersey: John Wiley & Sons, Inc., 1203. ISBN 0-471-72018-6.