Claverton Pumping Station
From Wikipedia, the free encyclopedia
Claverton Pumping Station is a pumping station, located in the village of Claverton in the English county of Somerset, which pumps water from the River Avon to the Kennet and Avon Canal using power from the flow of the River Avon.
Contents |
[edit] Description
At Claverton the canal is cut into the side of the Avon valley 48 ft (14.6 m) above the river. The pumping station is located in a pump house built of Bath Stone, located at river level. Water is diverted from the river by Warleigh Weir, about 200 yd (180 m) upstream. The water flows down a leat to the pumping station, where it powers a water wheel, 24 ft (7.3 m) wide and 17 ft (5.2 m) in diameter, with 48 wooden slats. At full power the wheel uses 2 tons (2 tonnes) of water per second and rotates five times a minute.[1]
The water wheel drives gearing which increases the speed to 16 rpm. From here, cranks drive vertical connecting rods which transfer the energy to two 18 ft (5.5 m) long cast iron rocking beams. Each rocking beam in turn drives an 18 in (0.5 m) diameter lift pump, which also take their supply from the mill leat. Each pump stroke raises 50 imperial gallons (230 litres) of water to the canal.[1]
[edit] History
The pumping station was built by John Rennie and worked continuously from 1813 until 1952. It then lay derelict until restored by a group of volunteers and re-opened in 1978.[1]
There is a working model of the pumping station at the Kennett and Avon museum at Devizes.
[edit] Visiting
The pumping station is open to the public and the website below provides details.
[edit] See also
- Crofton Pumping Station, another restored pumping station on the Kennet and Avon canal.
[edit] References
- ^ a b c Warwick Danks (ed) (2003). Claverton Pumping Station (A Definitive Study). Kennet & Avon Canal Trust. ISBN 0-9501173-4-X.
[edit] External links
- Claverton Pumping Station Website
- The Kennet and Avon Trust, whose members now maintain the pumping station
