Category 3 cable

From Wikipedia, the free encyclopedia

You have new messages (last change).

Category 3 cable, commonly known as Cat 3, is an unshielded twisted pair (UTP) cable designed to reliably carry data up to 10 Mbit/s, with a possible bandwidth of 16 MHz. It is part of a family of copper cabling standards defined jointly by the Electronic Industries Alliance and the Telecommunications Industry Association. Category 3 was a popular cabling format among computer network administrators in the early 1990s, but fell out of popularity in favor of the very similar, but higher performing, Cat 5 standard. Presently, most new structured cable installations are built with Cat 5e or Cat 6 cable. Cat 3 is currently still in use in two-line telephone systems, although Cat 5 or higher could do the same work while facilitating a transition to VOIP.

Note that unlike Cat 1,2,4, and 5 cables, Cat 3 is still recognized by TIA/EIA-568-B, its defining standard.

The newer 100BASE-T4 standard, which achieves speeds of 100 Mbit/s by using all 4 pairs of wires, allowed older Cat 3 based infrastructures to achieve a much higher bandwidth.

  • Cat 1: Currently unrecognized by TIA/EIA. Previously used for POTS telephone communications, ISDN and doorbell wiring.
  • Cat 2: Currently unrecognized by TIA/EIA. Previously was frequently used on 4 Mbit/s token ring networks.
  • Cat 3: Currently defined in TIA/EIA-568-B, used for data networks utilizing frequencies up to 16 MHz. Historically popular for 10 Mbit/s Ethernet networks.
  • Cat 4: Currently unrecognized by TIA/EIA. Provided performance of up to 20 MHz, and was frequently used on 16 Mbit/s token ring networks.
  • Cat 5: Currently unrecognized by TIA/EIA. Provided performance of up to 100 MHz, and was frequently used on 100 Mbit/s ethernet networks. May be unsuitable for 1000BASE-T gigabit ethernet.
  • Cat 5e: Currently defined in TIA/EIA-568-B. Provides performance of up to 100 MHz, and is frequently used for both 100 Mbit/s and gigabit ethernet networks.
  • Cat 6: Currently defined in TIA/EIA-568-B. It provides performance of up to 250 MHz, more than double category 5 and 5e.
  • Cat 6a: Future specification for 10Gb/s applications.
  • Cat 7: An informal name applied to ISO/IEC 11801 Class F cabling. This standard specifies four individually-shielded pairs (STP) inside an overall shield. Designed for transmission at frequencies up to 600 MHz.
TIA/EIA-568-B • Ethernet • 8P8C • Ethernet crossover cable • Twisted pair
Retrieved from "http://en.wikipedia.org../../../c/a/t/Category_3_cable.html"