Carousel slide projector
From Wikipedia, the free encyclopedia
A carousel slide projector is a common form of slide projector, used to create slideshows.
A separate, circular tray holds several slides (usually 20, 36, 80, or 140) 35mm slides, and is filled with each slide placed in upside down and backwards, so that the image is presented with the correct orientation.
The projector body contains a stepper motor which rotates the tray. As the projector is advanced, a reciprocating mechanism pushes the currently loaded slide back out into the tray, then the tray is rotated, dropping the next slide into position between the light source and lens.
The Kodak Carousel/Ektagraphic family of projectors, which have a horizontally mounted tray, are probably the most familiar and common carousel projectors. Less well-known but plentiful are a family of projectors based around a design originated by Sawyer/GAF (makers of the View-Master), and sold under many brand names; these are distinguished by the carousel tray being in an upright orientation, like a ferris wheel.
Simpler tray slide projectors often do not have the carousel form, but use the same mechanism with a linear tray.
During the 1970s, Kodak also produced a Pocket Carousel projector for use with miniature 110 format Kodachrome slides.[1][2]
The Kodak Carousel projector was discontinued in October 2004. [3]
[edit] References
- ^ Marcus, Ted R., APS, 110, "Disc," and Formats du Jour, Ted Marcus' Virtual Light Table. Article copyright date 2006, retrieved 2006-11-09.
- ^ Marcus, Ted R., Europe Through the Front Door, Ted Marcus' Virtual Light Table. Article copyright date 2004, retrieved 2006-11-09.
- ^ Kodak Slide Projectors, kodak.com corporate website. Article claimed frozen as of November 2004, retrieved 2006-11-09.
