Brodie helmet
From Wikipedia, the free encyclopedia
The Brodie helmet (also called the shrapnel helmet or Tommy helmet, and in the United States known as a doughboy helmet) was a steel helmet designed and patented in 1915 by John L. Brodie.
During the first year of World War I, none of the combatants offered steel helmets to their troops. The soldiers of most nations went into battle wearing simple cloth caps that offered virtually no protection from modern weapons. German troops were wearing the traditional leather Pickelhaube, also of little protective value.
The huge number of lethal head wounds that modern weapons were inflicting upon the French Army led them to introduce the first of the modern steel helmets in the summer of 1915. None of the steel helmets introduced during this era were intended to protect against bullets, but were primarily aimed at reducing headwounds from shrapnel. The first French helmets were bowl-shaped steel "skullcaps" worn under the cloth caps. However, these rudimentary helmets were soon replaced by the Model 1915 Adrian helmet, (designed by August-Louse Adrian). It replaced the traditional French kepi and was later adopted by the Belgian and Italian armies. At about the same time, the British War Office had also seen a similar need for steel helmets.
The caption reads - Head-wounds have been more than usually numerous during the war, owing to the trench-fighting, and more than usually severe, owing to the extensive use of shrapnel. But the danger, although it cannot be avoided, can be minimised. Our Army has now followed the French by adopting steel helmets, calculated to stop shell-splinters and shrapnel. Even in cases of extreme risk, not only has death been avoided, but injuries have been confined to bruises or superficial wounds. Cases have occurred in which the wearers have been hit, but saved by these helmets from what without them would have meant certain death. The fur coats, as they did last year, mean mitigation of the rigours of winter. The French helmets are known as "Adrians," after their inventor. (Photo by Illustrations Harrow).
The War Office Invention Department was asked to evaluate the French design but they decided that it was not strong enough and was too complex to afford swift manufacture. The design submitted by John L. Brodie offered advantages over the French design as it could be pressed from a single thick sheet of steel, giving it added strength. The British Army first utilised the helmet in September of 1915 but it was not until the spring of 1916 that the helmet began to be issued to British troops in large numbers. It was first used in battle in April of that year at the Battle of St Eloi. Troops from other countries in the British Empire also used the Brodie helmet as did the United States Armed Forces when they entered the war in 1917. The United States Government initially purchased some 400,000 helmets from Britain. From January 1918 the US Army began to use helmets manufactured in the US and these helmets were designated M1917.
The helmet had a shallow circular crown with a wide brim around the edge, a leather liner and a leather chinstrap. The helmet's "soup bowl" shape was originally designed to protect the wearer's head and shoulders from shrapnel falling from above. The shallow bowl design allowed the use of relatively thick steel that could be formed in a single pressing while maintaining the helmet's thickness. Although this made it more resistant to projectiles, the design offered less protection to the lower part of the head and neck than other designs. The steel helmet was known to the troops as a "tin hat" or for the officers a "battle bowler" (from Bowler hat) and, with typical black humour, a bayonet was sometimes called a "tin opener".
The original design (Type A) was made of mild steel with a brim 1.5–2 inches wide. The Type A was in production for just a few weeks before the specification was changed and the Type B was introduced. The Type B was made of hardened manganese steel, had a narrower brim and had a more domed crown. In May 1916 the Mark I began to be issued. The Mark I had a matte finish textured with sawdust or crushed cork to prevent reflection. The Mark I was issued in large numbers and saw out the rest of the War. In 1917 the liner was modified to include a rubber cushion to make it more comfortable (this was not adopted for the M1917). Helmets were often painted with unit insignia towards the end of the war, and are often called "parade helmets" by collectors.
The basic Brodie-patterned helmet was used by the US Army until 1942 with minor modifications, including a totally new liner and canvas chinstrap. This basic design was used into World War II, until finally completely superseded by the M1 Helmet in 1942. The Brodie pattern continued to be used (as the slightly modified Mark II) by the British and Commonwealth forces throughout World War II. During this period, the helmet was also used by the police, the fire brigade and ARP wardens in Britain. There was also a "civil" pattern available which was a little deeper but made from ordinary mild steel, and which was available for private purchase.
In 1944, the British replaced it with a significantly modified design known as the Mark III. Many collectors today refer to this helmet incorrectly as the "turtle" helmet. This was a deeper helmet with a smaller brim and provided 38% more protection than the Mark II, particularly at the sides. The Mark III helmet was issued primarily to assault troops for the Normandy invasion in June 1944, and a large number of helmets from British stocks were issued to the 3rd Canadian Division in addition to British units. Small numbers also went to the 2nd and 4th Canadian Divisions, and all Mark III helmets in Canadian stores were returned to the British at the end of the war.
A Mark IV helmet was issued after the war, very similar to the Mark III, but with the rivets holding the chinstrap to the helmet placed much higher up on the shell. There were also other differences in liner details.
In the late 1980s the British replaced steel helmets with kevlar ones.
