Amine gas treating

From Wikipedia, the free encyclopedia

Amine gas treating refers to a group of processes that use aqueous solutions of various amines to remove hydrogen sulfide (H₂S) and carbon dioxide (CO₂) from gases. It is a common unit process used in refineries, petrochemical plants, natural gas processing plants and other industries. The process is also known as Gas sweetening and Acid gas removal.

There are many different amines used in gas treating:

• Monoethanolamine (MEA)
• Diethanolamine (DEA)
• Methyldiethanolamine (MDEA)
• Diisopropylamine (DIPA)
• Diglycolamine (DGA)

The most commonly used amines in industrial plants are the alkanolamines MEA and DEA.

Amines are also used in many oil refineries to remove acid gases from liquid hydrocarbons such as liquified petroleum gas (LPG).

Contents 1 Description of a typical amine treater 2 See also 3 External links 4 References

[edit] Description of a typical amine treater

Gases containing both H₂S and CO₂ are commonly referred to as sour gases in the hydrocarbon processing industries. A typical amine gas treating process includes an absorber unit and a regenerator unit as well as accessory equipment. In the absorber, the downflowing amine solution absorbs H₂S and CO₂ (referred to as acid gases) from the uplflowing sour gas to produce a sweetened gas stream (i.e., an H₂S-free gas) as a product and an amine solution rich in the absorbed acid gases. The resultant "rich" amine is then routed into the regenerator (a stripper with a reboiler) to produce regenerated or "lean" amine that is recycled for reuse in the absorber. The stripped overhead gas from the regenerator is concentrated H₂S and CO₂. In oil refineries, that stripped gas is mostly H₂S, much of which often comes from a sulfur-removing process called hydrodesulfurization. This H₂S-rich stripped gas stream is then usually routed into a Claus process to convert it into elemental sulfur. In fact, the vast majority of the 64,000,000 metric tons of sulfur produced worldwide in 2005 was byproduct sulfur from refineries and other hydrocarbon processing plants. ^[1][2] In some plants, more than one amine absorber unit may share a common regenerator unit.

In the steam reforming process of hydrocarbons to produce gaseous hydrogen for subsequent use in the industrial synthesis of ammonia, amine treating is one of the commonly used processes for removing excess carbon dioxide in the final purification of the gaseous hydrogen.

[edit] See also

• Ammonia production
• Oil desulfurization
• Hydrotreater

[edit] External links

• Selecting Amines for Sweetening Units, Polasek, J. (Bryan Research & Engineering) and Bullin, J.A. (Texas A&M University), Gas Processors Association Regional Meeting, Sept. 1994.

• Natural Gas Supply Association Scroll down to Sulfur and Carbon Dioxide Removal

• Sweetening LPG's with Amines, Holmes, J.W. (Bryan Research & Engineering), Spears, M.L. (Bryan Research & Engineering), and Bullin, J.A. (Texas A&M University), Chemical Engineering Progress, May 1984

• Description of the classic book on gas treating by Arthur Kohl & Richard Nielsen. Gas Purification, Fifth Edition, Gulf Publishing. ISBN 088415220.

[edit] References

1. ^ Sulfur production report by the United States Geological Survey
2. ^ Discussion of recovered byproduct sulfur