Aerospaceplane
From Wikipedia, the free encyclopedia
The US Air Force's aerospaceplane project encompassed a variety of projects from 1958 until 1963 to study a fully-reusable spaceplane. A variety of designs were studied during the lifetime of the project, including most of the early efforts on liquid air cycle engines (LACE) and even a nuclear-powered ramjet.
The effort was started largely due to the work of Weldon Worth at the Wright-Patterson AFB, who published a short work outlining a manned spaceplane. AF officials were interested enough to start SR-89774 (study requirement-) for a reusable spaceplane in 1957. By 1959 this work had resulted in the Recoverable Orbital Launch System, or ROLS, based around a LACE engine, known at the time as a Liquid Air Collection System, or LACES.
Further work showed that more performance could be gained by extracting only the oxygen from the liquid air, a system they referred to as Air Collection and Enrichment System, or ACES. A development contract to develop an ACES testbed was placed with Marquardt and General Dynamics, with Garret AirResearch building the heat exchanger for cooling the air. The original ACES design was fairly complex; the air was first liquified in the heat exchanger cooled by liquid hydrogen fuel, then pumped into a low pressure tank for short term storage. From there it was then pumped into a high pressure tank where the oxygen was separated and the rest (mostly nitrogen) was dumped overboard. In late 1960 and early 1961 a 125 N demonstrator engine was being operated for up to five minutes at a time.
In early 1960 Air Force offered a development contract to build a spaceplane with a crew of three that could take off from any runway and fly directly into orbit and return. They wanted the design to be in operation in 1970 for a total development cost of only $5 billion. Boeing, Douglas, Convair, Lockheed, Goodyear, North American, and Republic all responded.
However most of these designs ignored the ACES system and instead used a scramjet for power. The scramjet had first been outlined at about the same time as the original LACES design in a NASA paper of 1958, and many companies were highly interested in seeing it develop, perhaps none more than Marquardt, whose ramjet business was dwindling with the introduction of newer jet engines and who had already started work on the scramjet.
Later that year a review suggested that the basic concepts of the aerospaceplane were far too new for development of an operational system to begin. They pointed out that far too much was being spent on development of the aircraft, and not nearly enough on basic research. Further the designs were all extremely sensitive to weight, and any increase (and there always is one) could result in all of the designs not working.
In 1963 the Air Force changed their priorities in SR-651, and focussed entirely on development of a variety of high-speed engines. Included were LACES and ACES engines, as well scramjets, turboramjets and a "normal" (subsonic combustion) ramjet with an intake suitable for use up to Mach 8. In October a further review concluded that the technology was simply too new for anyone to predict when any such aerospaceplane could ever be built, and funding was wound down in 1964.
